Addendum: Additional VNE Driver Support for Cisco Prime Network
4.1
Date: June 6, 2014
This is a companion document to Cisco Prime Network 4.1 Supported VNEs. It contains:
•
•
Device support information for Change and Configuration Management.
Device support information for command scripts (scripts launched by right-clicking an NE in
Prime Network Vision and choosing Commands).
Table of Contents
Obtaining the New and Enhanced Device Drivers ........................................................................................................... 3
Prime Network Support for Third-Party Devices ............................................................................................................. 3
Which Jar File is a Device Using? ..................................................................................................................................... 4
New Support for Cisco Optical Transport Devices ........................................................................................................... 5
Cisco Carrier Packet Transport Series (CPT 600 and CPT 200)—Additional Support................................................... 5
Cisco Carrier Packet Transport Series (CPT 50)—Additional Support.......................................................................... 5
New Support for Cisco Routers ........................................................................................................................................ 6
Cisco CRS Carrier Routing System—Additional Support .............................................................................................. 6
Cisco ASR 9000 Series Routers —Additional Support .................................................................................................. 7
Cisco NCS Network Convergence System Routers - Additional Support ..................................................................... 8
Cisco ISR 2900 Series Routers —Additional Support ................................................................................................... 9
Cisco ISR 3900 Series Routers —Additional Support ................................................................................................... 9
Cisco ASR 901 Routers —Additional Support ............................................................................................................ 10
Cisco ASR 901S Series Aggregation Services Routers —Additional Support ............................................................. 10
Cisco ASR 902 Series Aggregation Services Routers —Additional Support ............................................................... 10
Cisco ASR 903 Routers —Additional Support ............................................................................................................ 11
Cisco ASR 5000 Series Routers —Additional Support ................................................................................................ 11
Cisco 7600 Series Routers —Additional Support ....................................................................................................... 11
New Support for Cisco Switches .................................................................................................................................... 12
Cisco ME 1200 Series Carrier Ethernet Access Devices—Additional Support ........................................................... 12
Cisco ME 3600X Series Ethernet Access Switches—Additional Support ................................................................... 12
1
Cisco ME 3800X Series Carrier Ethernet Switches—Additional Support ................................................................... 13
Cisco Nexus 7000 Series Switches—Additional Support ........................................................................................... 13
Cisco Catalyst 3560-X Series Switches —Additional Support .................................................................................... 14
Cisco Catalyst 6500 VSS Series Switches —Additional Support ................................................................................. 14
Support for Change and Configuration Management in 4.1 ......................................................................................... 15
Cisco Cable Modem Termination Systems (CMTS) .................................................................................................... 15
Cisco Optical Transport .............................................................................................................................................. 15
Cisco Security Appliances ........................................................................................................................................... 18
Cisco UEQAM ............................................................................................................................................................. 20
Cisco Routers.............................................................................................................................................................. 20
Cisco Switches ................................................................................................................................................................ 35
Cisco ME 3400 Series Ethernet Access Switches ....................................................................................................... 35
Cisco ME 3600X Ethernet Access Switches ................................................................................................................ 36
Cisco ME 3800X Carrier Ethernet Switches................................................................................................................ 36
Cisco ME 4600 Series Multiservice Optical Access Platform ..................................................................................... 37
Cisco ME 6500 Series Ethernet Switches (cisco6524) ................................................................................................ 37
Cisco Catalyst 2900 Series Switches........................................................................................................................... 37
Cisco Catalyst 3500XL Series Switches ....................................................................................................................... 38
Cisco Catalyst 3550 Series Switches........................................................................................................................... 38
Cisco Catalyst 3560 Series Switches........................................................................................................................... 39
Cisco Catalyst 3750 Series Switches........................................................................................................................... 39
Cisco Catalyst 3750 Metro Series Switches................................................................................................................ 40
Cisco Catalyst 4500 Series Switches........................................................................................................................... 41
Cisco Catalyst 4900 Series Ethernet Switches............................................................................................................ 41
Cisco Catalyst 6500 Series Switches (IOS) .................................................................................................................. 42
Cisco Catalyst 6500 Virtual Switching System (VSS) .................................................................................................. 42
Cisco Nexus Series Switches....................................................................................................................................... 43
Support for Command Scripts in 4.1 .............................................................................................................................. 45
Optical Commands ..................................................................................................................................................... 45
Routing Protocol Commands ..................................................................................................................................... 46
Ethernet-OAM (E-OAM) Commands .......................................................................................................................... 50
IP Commands ............................................................................................................................................................. 58
MPLS and MPLS-TP Commands ................................................................................................................................. 65
2
Session Border Control Commands ........................................................................................................................... 68
SONET/SDH Commands ............................................................................................................................................. 68
TDM (Time Division Multiplexing) Commands .......................................................................................................... 69
Channelization Commands ........................................................................................................................................ 70
IPoDWDM (IP over DWDM) Commands .................................................................................................................... 70
MToP (Mobile Transport over Packet) Commands.................................................................................................... 71
Mobility Commands ................................................................................................................................................... 72
PWHE (Pseudowire Headend) Commands ................................................................................................................ 75
MCLAG (Multi-Chassis Link Aggregation Group) Commands .................................................................................... 75
E1 Multilink Commands ............................................................................................................................................. 75
RSVP (Resource Reservation Protocol) Commands ................................................................................................... 76
Cable Commands ....................................................................................................................................................... 77
Basic Device Settings Commands............................................................................................................................... 77
Appendix A – IOS-XE to IOS Software Mapping ............................................................................................................. 81
Obtaining the New and Enhanced Device Drivers
New and enhanced VNE support for multiple device families is be provided through Prime Network Device Packages
(DPs), Service Patches, and Point Patches, as they become available. To obtain this additional support, do the
following:
• For Device Packages (DPs), log into Cisco.com and go to the Cisco Prime Network Software Download
site.
• For Service Patches, log into Cisco.com and go to the Cisco Prime Network Software Download site.
• For Point Patches, contact your Cisco representative.
Once you download the new support, it can be installed on Cisco Prime Network 4.1. DP contents are described in this
document (and in the Readme that accompanies the download). Service and Point Patch contents are described in the
Release Note or Readme that are provided on the download site.
Note: A mapping of IOS-XE software to their IOS software equivalents is provided Appendix A.
Prime Network Support for Third-Party Devices
Prime Network supports third-party devices through Cisco Advanced Services engagement. As of release 4.1, Prime
Network native support is deprecated. As of release 4.2, Prime Network will not natively support third-party devices,
and a Cisco Advanced Services contract will be required for their enablement and support.
3
Which Jar File is a Device Using?
To identify the jar file that is being used by any devices that are managed by Prime Network, open the Administration
client and check the properties of the VNE. In the General tab, the driver file name is displayed.
The following example shows a Cisco UBR 10012 that is using the driver file Cisco-UBR100xx-v6.0.0.0.jar that was
provided in the base release of Prime Network 4.1 (“DP 0”).
With this information, you can check if a newer version is available and what new support it provides (see the “New
Support” sections in this document).
4
New Support for Cisco Optical Transport Devices
The following new support is available for Cisco Optical Transport devices.
Cisco Carrier Packet Transport Series (CPT 600 and CPT 200)—Additional Support
•
•
•
Cisco CPT—Supported Software Versions
Software Version
Added in:
ONS 9.5.2.3
DP 1405
ONS 9.7
DP 1405
Cisco CPT —Supported Technologies
Technology
Added in:
IP Multicast
DP 1405
Cisco CPT —Supported Modules
Module Name
Module Description
Added in:
ONS-SC_GE-LX
1000BASE LX SFP
DP 1405
Cisco Carrier Packet Transport Series (CPT 50)—Additional Support
•
•
Cisco CPT 50—Supported Software Versions
Software Version
Added in:
IOS 15.2(2)SC
DP 1405
Cisco CPT 50 —Supported Modules
Module Name
Module Description
Added in:
ONS-SC_GE-LX
1000BASE LX SFP
DP 1405
5
New Support for Cisco Routers
The following new support is available for Cisco routers.
Cisco CRS Carrier Routing System—Additional Support
•
Cisco CRS—Supported Software Versions
Software Version
Added in:
XR 4.3.2
DP 1405
XR 5.1.1
DP 1405
XR 5.1.2
DP 1405
•
Cisco CRS—Supported Modules
Module Name
Module Description
Added in:
40x10GE-WLO
Cisco CRS Series 40x10GbE Interface Module
DP 1405
4X100GE-LO
Cisco CRS Series 4x100GbE Interface Module
DP 1405
CRS-LSP-X
Cisco CRS Series Label Switch Processor 400G
DP 1405
CRS-FP-X
Cisco CRS Series Forwarding Processor 400G
DP 1405
CRS-MSC-X
Cisco CRS Series Modular Services Card 400G
DP 1405
CRS-16-FC400/S
Cisco CRS Series 16 Slots Fabric Card / Single (400G) DP 1405
CRS-8-FC400/S
Cisco CRS Series 8 Slots Fabric Card / Single (400G)
CPAK-100G-SR10 100GBASE-SR10 CPAK Module for MMF
CPAK-100G-LR4
100GBASE-LR4 CPAK Module for SMF
CFP-100G-SR10
Cisco 100GBASE-SR10 CFP Module for MMF
DP 1405
DP 1405
DP 1405
DP 1405
6
Cisco ASR 9000 Series Routers —Additional Support
•
Cisco ASR 9000—Supported Network Elements
NE Type
Product Name
SysOID
Added in:
ciscoASR9904
Cisco ASR 9904 chassis
1.3.6.1.4.1.9.1.1762
DP 1405
ciscoASR9912
Cisco ASR 9912 Chassis
1.3.6.1.4.1.9.1.1709
DP 1405
ASR9000v
ASR 9000v DC powered chassis
NA
DP 1405
•
Cisco ASR 9000—Supported Software Versions
Software Version
Added in:
XR 4.3.2
DP 1405
XR 4.3.4
DP 1405
XR 5.1.0
DP 1405
XR 5.1.1
DP 1405
XR 5.1.2
DP 1405
•
Cisco ASR 9000—Supported Modules
Module Name
Module Description
Added in:
SPA-OC192POS-XFP
1-port OC192/STM64 POS/RPR XFP Optics
DP 1405
CFP-100G-SR10
Cisco 100GBASE-SR10 CFP transceiver module for MMF
DP 1405
SPA-8XCHT1/E1-V2
8-port Channelized T1/E1 V2 to DS0 Shared Port Adapter
DP 1405
ONS-SC+-10G-ER
10GBASE-ER SFP+ Module for SMF-Commercial Temp
DP 1405
ONS-SC+-10G-SR
10GBASE-SR SFP+ Module for MMF-Commercial Temp
DP 1405
ONS-SC+-10G-ZR
10GBASE-ZR SFP+ Module for SMF-Commercial Temp
DP 1405
ONS-SC+-10G-LR
10GBASE-LR SFP+ Module for SMF-Commercial Temp
DP 1405
DWDM-SFP10G-61.41
10GBASE-DWDM 1561.41 nm SFP+ (100-GHz ITU grid)
DP 1405
CWDM-SFP-1550
Cisco CWDM 1550-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel
DP 1405
ONS-SC+-10G-30.3
10G MR, SFP+ 1530.33, 100 GHz, LC
DP 1405
ONS-SC+10G-C
10G MR, Full C Band Tuneable DWDM SFP+, 50 Ghz, LC
DP 1405
SPA-1XOC48POS/RPR
1 port OC48c/STM-16c POS/RPR Shared Port Adapter
DP 1405
A9K-VSM-500
Cisco ASR 9000 Series Virtualized Service Module
DP 1405
GLC-FE-100EX
100BASE-EX for Fast Ethernet SFP Ports
DP 1405
ONS-XC-10G-1610
OC192/10GE/OTU2, CWDM, 1610nm, XFP C-Temp,
40km range
DP 1405
7
•
Cisco ASR 9000—Supported Events and Miscellaneous Support
Support for:
Added in:
Events: (Trap) PLATFORM-CCTL-6-TEMP_ALARM, IPSLA Threshold Notification
DP 1405
Events: (Syslog) NODE_STATE_CHANGE
DP 1405
Cisco NCS Network Convergence System Routers - Additional Support
•
Software Version
Added in:
XR 5.0.1
DP 1405
•
Module Name
Cisco NCS 6000—Supported Software Versions
Cisco NCS 6000—Supported Modules
Module Description
Added in:
NC6-10X100G-M-K NCS 6000 10x100G Multi-Service CPAK
DP 1405
NC6-60X10GE-M-S Cisco NCS 6000 Series 60 Port 10Gigabit Ethernet Multiservice Line Card SFP+ Optics
DP 1405
NC6-60X10GE-L-S
Cisco NCS 6000 60 Port 10Gigabit Ethernet Label Switch Router Line Card SFP+ Optics DP 1405
NCS-DC-PWRMOD NCS6008 Standalone Linkwood Chassis
DP 1405
CPAK-100G-SR10
100GBASE-SR10 CPAK Module for MMF
DP 1405
SFP-10G-SR-X
10GBASE-SR 850 nm MMF (LANPHY & WANPHY)
DP 1405
SFP-10G-SR
10GBASE-SR 850 nm MMF (LANPHY)
DP 1405
SFP-10G-LR
10GBASE-LR 1310 nm SMF (LANPHY)
DP 1405
SFP-10G-ER
10GBASE-ER 1550 nm SMF1
DP 1405
SFP-10G-LR-X
10GBASE-LR 1310 nm SMF (LANPHY & WANPHY)
DP 1405
SFP-10G-ZR
10GBASE-ZR SFP+, SMF 80km
DP 1405
8
Cisco ISR 2900 Series Routers —Additional Support
•
Cisco ISR 2900—Supported Software Versions
Software Version
DP 1405
IOS 15.4(1)T
•
Added in:
Cisco ISR 2900—Supported Modules
Module Name
Module Description
Added in:
EHWIC-4ESG
4 port 10/100/1000 Enhanced High-Speed WAN Interface
Gigabit Ethernet switch
DP 1405
EHWIC-1GE-SFP-CU Enhanced HWIC, Dual Mode 1 port SFP/Copper
DP 1405
Cisco ISR 3900 Series Routers —Additional Support
•
Cisco ISR 3900 —Supported Network Elements
NE Type
Product Name
SysOID
Added in:
Cisco3945SPE250
Cisco 3945SPE250
1.3.6.1.4.1.9.1.1145
DP 1405
•
Cisco ISR 3900—Supported Software
versions
Software Version
IOS 15.4(1)T
Added in:
DP 1405
•
Cisco ISR 3900—Supported Modules
Module Name
Module Description
Added in:
EHWIC-4ESG
4 port 10/100/1000 Enhanced High-Speed WAN Interface
Gigabit Ethernet switch
DP 1405
EHWIC-1GE-SFP-CU Enhanced HWIC, Dual Mode 1 port SFP/Copper
DP 1405
9
Cisco ASR 901 Routers —Additional Support
•
Cisco ASR 901—Supported Software Versions
Software Version
Added in:
15.3(3)S1
DP 1405
15.3(3)S2
DP 1405
15.4(1)S
DP 1405
15.4(2)S
DP 1405
Cisco ASR 901S Series Aggregation Services Routers —Additional Support
•
Cisco ASR 901S —Supported Network Elements
NE Type
Product Name
SysOID
Added in:
A901S-2SG-F-D
Cisco A901S-2SG-F-D Router
1.3.6.1.4.1.9.1.1820
DP 1405
A901S-3SG-F-D
Cisco A901S-3SG-F-D Router
1.3.6.1.4.1.9.1.1819
DP 1405
A901S-4SG-F-D
Cisco A901S-4SG-F-D Router
1.3.6.1.4.1.9.1.1818
DP 1405
•
Cisco ASR 901S —Supported Software Versions
Software Version
Added in:
IOS 15.4(1)S1
DP 1405
Cisco ASR 902 Series Aggregation Services Routers —Additional Support
•
Cisco ASR 902 —Supported Software Versions
Software Version
Added in:
IOS XE 3.12
DP 1405
•
Cisco ASR 902 —Supported Network Elements
NE Type
Product Name
SysOID
Added in:
ASR-902
Cisco ASR 902 Router
1.3.6.1.4.1.9.1.1897
DP 1405
•
Cisco ASR 902 —Supported Modules
Module Name Module Description
Added in:
A902-FAN-E
DP 1405
ASR 902 Enhanced FAN Tray with FAN Filter Slot
10
Cisco ASR 903 Routers —Additional Support
•
Cisco ASR 903—Supported Software Versions
Software Version
Added in:
IOS XE 3.7.3 ES
DP 1405
IOS XE 3.7.4 ES
DP 1405
IOS XE 3.10.1
DP 1405
IOS XE 3.10.2
DP 1405
IOS XE 3.11
DP 1405
IOS XE 3.12
DP 1405
•
Cisco ASR 903 —Supported Technologies
Technology
Added in:
Y1731
DP 1405
Cisco ASR 5000 Series Routers —Additional Support
•
Cisco ASR 5000 —Supported Modules
Module Name
Module Description
ASR5K-PSC-64G-K9 Cisco ASR 5000 Processing Card ASR5K-PSC-64G-K9
Added in:
DP 1405
Cisco 7600 Series Routers —Additional Support
•
Cisco 7600—Supported Software Versions
Software Version
Added in:
15.3(2)S
DP 1405
15.3(3)S
DP 1405
•
Cisco 7600 —Supported Technologies
Technology
Added in:
Y1731
DP 1405
QOS
DP 1405
11
New Support for Cisco Switches
The following new support is available for Cisco switches.
Cisco ME 1200 Series Carrier Ethernet Access Devices—Additional Support
•
Cisco ME 1200 —Supported Network Elements
NE Type
Product Name
SysOID
Added in:
ME 1200-4S-D
Cisco ME 1200-4S-D Switch
1.3.6.1.4.1.9.1.1899
DP 1405
ME 1200-4S-A
Cisco ME 1200-4S-A Switch
1.3.6.1.4.1.9.1.1899
DP 1405
•
Cisco ME 1200—Supported Software Versions
Software Version
Added in:
IOS 15.4(2)SN
DP 1405
•
Cisco ME 1200 —Supported Technologies
Technology
Added in:
Accesslist
DP 1405
LLDP
DP 1405
STP
DP 1405
CFM
DP 1405
SyncE
DP 1405
OAM
DP 1405
LAG
DP 1405
VLAN
DP 1405
EFP
DP 1405
Routing Entity
DP 1405
Cisco ME 3600X Series Ethernet Access Switches—Additional Support
•
Cisco ME 3600X—Supported Software Versions
Software Version
Added in:
IOS 15.3(3)S
DP 1405
IOS 15.4(1)S
DP 1405
IOS 15.4(2)S
DP 1405
12
•
Cisco ME 3600X —Supported Technologies
Technology
Added in:
Y1731
DP 1405
QOS
DP 1405
Cisco ME 3800X Series Carrier Ethernet Switches—Additional Support
•
Cisco ME 3800X—Supported Software Versions
Software Version
Added in:
IOS 15.3(3)S
DP 1405
IOS 15.4(1)S
DP 1405
IOS 15.4(2)S
DP 1405
•
Cisco ME 3800X —Supported Technologies
Technology
Added in:
Y1731
DP 1405
QOS
DP 1405
Cisco Nexus 7000 Series Switches—Additional Support
•
Cisco Nexus 7000—Supported Network Elements
NE Type
Product Name
SysOID
Added in:
N77-C7706
Cisco Nexus 7706 Series 06 Slot Chassis
1.3.6.1.4.1.9.12.3.1.3.1354
DP 1405
N77-C7710
Cisco Nexus 7710 Series 10 Slot Chassis
1.3.6.1.4.1.9.12.3.1.3.1353
DP 1405
•
•
Cisco Nexus 7000—Supported Software Versions
Software Version
Added in:
NX-OS 6.2.6
DP 1405
NX-OS 6.2.8
DP 1405
Cisco Nexus 7000—Supported Modules
Module Name
Module Description
Added in:
N77-F248XP-23E
N7706 : N77-F248XP-23E : Nexus F2E cards for the 7706
DP 1405
N77-C7706-FAB-2 N7706 : N77-C7706-FAB-2 : N77-C7706-FAB-2 card
N77-F312CK-26
N7706/N7710 : N77-F312CK-26 : F3 line card for Crossbow (7700):
12x100GE – with 6.2(6)
DP 1405
DP 1405
13
Module Name
Module Description
Added in:
N77-F348XP-23
N7706/N7710 : N77-F348XP-23 : F3 line card for Crossbow (7700):
48x10GE – with 6.2(6)
DP 1405
N77-F324FQ-25
N7706/N7710 : N77-F324FQ-25 : F3 line card for Crossbow (7700):
24x40GE – with 6.2(6)
DP 1405
N77-F248XP-23E
N7710 : N77-F248XP-23E : Nexus F2E cards for the 7710
DP 1405
N77-SUP2E
N7710 : N77-SUP2E card
DP 1405
N77-C7710-FAB-2 N7710 : N77-C7710-FAB-2 card
DP 1405
N77-AC-3KW
N7710 : AC: N77-AC-3KW card
DP 1405
N77-DC-3KW
N7710 : AC: N77-DC-3KW card
DP 1405
N7K-F312FQ-25
N7010 : N7K-F312FQ-25 : F3 line cards (EFT) for Nexus 7K (12x40GE card)
DP 1405
N7K-F248XP-25
N7010 : N7K-F248XP-25E : F2e – 1/10GE line card
DP 1405
QSFP-40G-SR4
40GBASE-SR4 QSFP Transceiver Module with MPO Connector
DP 1405
CPAK-100G-LR4
100GBASE-LR4 CPAK form factor transceiver module for SMF, 4 LAN-WDM
lanes
DP 1405
DP 1405
N2K-C2248PQ
Cisco Nexus 2248PQ 10GE Fabric Extender, 2PS, 4 Fan Module, 48x1/10GE
(req SFP/SFP+) + 4x40G QSFP+(req QSFP+), choice of airflow and power
supply
•
Cisco Nexus 7000—Supported Events and Miscellaneous Support
Support for:
Added in:
Events : (Syslog) ETHPORT-5-IF_HARDWARE-Removed, ETHPORT-5-IF_HARDWAREInserted, MODULE-5-STANDBY_SUP_OK, VDC_MGR-2-VDC_OFFLINE, VDC_MGR-2VDC_ONLINE, VPC-4-VPC_ROLE_CHANGE-Primary, VPC-4-VPC_ROLE_CHANGESecondary, HSRP_ENGINE-5-STANDBY_CHANGE, PLATFORM-5-FEX_PS_REMOVE,
PLATFORM-5-FEX_PS_FOUND, ETHPORT-3-IF_DOWN_ADMIN_DOWN, ETHPORT-5IF_UP
DP 1405
Cisco Catalyst 3560-X Series Switches —Additional Support
•
Cisco Catalyst 3560-X —Supported Software Versions
Software Version
Added in:
IOS 15.0(2)SE6
DP 1405
Cisco Catalyst 6500 VSS Series Switches —Additional Support
•
Cisco Catalyst 6500 VSS —Supported Software Versions
Software Version
Added in:
IOS 15.1(1)SY2
DP 1405
IOS 15.1(1)SY3
DP 1405
14
Support for Change and Configuration Management in 4.1
The following devices support Change and Configuration Management in Prime Network 4.1.
Cisco Cable Modem Termination Systems (CMTS)
Cisco Universal Broadband Router 10000 (uBR10000)
Device Series
Software Version/Feature
Provided/Added in:
Cisco Universal Broadband Router 10000 (uBR10k)
12.2(33)
PN 4.0
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Optical Transport
Cisco Carrier Packet Transport Series (CPT)
Cisco CPT 600
Device Series
Software Version/Feature
Provided/Added in:
CPT Platform System Software 9.5.1 IOS Mode
PN 3.10
CPT Platform System Software 9.5.2 IOS Mode
PN 3.10.xTo3.11.x-DP1305
PN 3.10.xTo3.11.x-DP1310
Cisco Carrier Packet Transport (CPT) 600 Series
CPT Platform System Software 9.5.3 IOS Mode
PN 4.0 DP 1310
CTC Mode
Memory Backup/Restore
Software downgrade
PN 4.1 (New!)
CPT Platform System Software 9.7 IOS Mode
PN 4.1 DP 1405
15
Features
Backup
Support
Yes
Restore
Yes








Level of Support/Limitations
Startup Configuration
Memory Configuration
Memory configuration is binary format. Not allowed to view/compare/edit Memory configuration.
Merge mode is not supported.
Edit Restore and Edited Archive restore is performed in Overwrite mode for startup configuration.
Edit Restore not supported for Memory configuration.
After restoring memory configuration, device will reboot with the same operational mode with the
selected archive.
While restoring the memory config, the device will reboot in the same mode as the selected config
file mode(CTC or IOS). The mode info will be displayed in the context/priority column.
Synchronize
No
Change log
No
Configuration
Yes
Export
Image Baseline
No
Distribution
Yes
No selection of Storage.
Activation
Yes
No selection of Image.
ISSU Support
No
Supported Protocol: FTP
Prerequisite:
 TL1 should be enabled in the VNE.
 Default TL1 port is 3082.
Prime Network FTP username and password should be configured in the GW. This is required because Prime Network initiates the
FTP operation using a TL1 interface, and the TL1 commands require the username and password as input parameters. After you
add this information to the registry, the credentials are automatically read when needed. If there is any special character in the
ftp-username and ftp-password, CCM job will be failed if any of the special characters reserved for special use in the command-line
interface on the device.
PN_HOME#runRegTool.sh -gs 127.0.0.1 setEncrypted 0.0.0.0 nccm-settings/ftpsettings/username ftp-username
PN_HOME#runRegTool.sh -gs 127.0.0.1 setEncrypted 0.0.0.0 nccm-settings/ftpsettings/password ftp-password
Restrict the FTP configuration such that the Prime Network Unit User has read-write access only to the
$PRIME_NETWORK_HOME/tftp directory and hence does not have access to unwanted files outside the home directory.
 FTP service should be up and running on the GW/UNIT.
16
Cisco CPT 200
Device Series
Cisco Carrier Packet Transport (CPT) 200 Series
Features
Backup
Support
Yes
Restore
Yes
Software Version/Feature
Provided/Added in:
CPT Platform System Software 9.5.3
IOS and CTC Mode
PN 4.1 (New!)
Level of Support/Limitations
 Startup Configuration
 Memory Configuration
 Memory configuration is binary format. Not allowed to view/compare/edit Memory configuration.
 Merge mode is not supported.
 Edit Restore and Edited Archive restore is performed in Overwrite mode for startup configuration.
 Edit Restore not supported for Memory configuration.
 After restoring memory configuration, device will reboot with the same oper mode with the selected
archive.
Synchronize
No
Change log
No
Configuration
Yes
Export
Image Baseline
No
Distribution
Yes
No selection of Storage.
Activation
Yes
No selection of Image.
ISSU Support
No
Supported Protocol: FTP
Prerequisite:
 TL1 should be enabled in the VNE.
 Default TL1 port is 3082.
 Prime Network FTP username and password should be configured in the GW. This is required because Prime Network initiates the FTP
operation using a TL1 interface, and the TL1 commands require the username and password as input parameters. After adding this
information to the registry, the credentials are automatically read when needed. If there is any special character in the ftp-username and
ftp-password, CCM job will be failed if any of the special characters reserved for special use in the command-line interface on the device.
PN_HOME #runRegTool.sh -gs 127.0.0.1 setEncrypted 0.0.0.0 nccm-settings/ftpsettings/username ftp-username
PN_HOME#runRegTool.sh -gs 127.0.0.1 setEncrypted 0.0.0.0 nccm-settings/ftpsettings/password ftp-passwd
 Restrict the FTP configuration such that the Prime Network Unit User has read-write access only to the $PRIME_NETWORK_HOME/tftp
 FTP service should be up and running.
17
Cisco CPT 50
Device Series
Software Version/Feature
Provided/Added in:
Cisco Carrier Packet Transport (CPT) 50 Series
Image 15.2
PN 4.1 (New!)
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Image Baseline
NA
Distribution
NA
Activation
NA
ISSU Support
NA
Supported Protocol: TFTP, FTP
Cisco Security Appliances
Cisco Adaptive Security Appliance (ASA)
Cisco ASA 5500 Series Firewall
Device Series
Cisco ASA 5500 Series Firewall
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
8.0(3)
ANA 3.7.2-DP-1.0
5.0 (U5)
PN 4.0
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SCP
18
Cisco Adaptive Security Appliance (ASA) 5550 Series
Device Series
Software Version/Feature
Provided/Added in:
Cisco Adaptive Security Appliance (ASA) 5550 Series
Cisco Adaptive Security Appliance
Software 8.4.1
PN 3.7.3
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Activation
ISSU Support
Image Baseline
Supported Protocol:
Yes
Yes
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Yes
Yes
NO
Yes
TFTP,SCP
Cisco ASA 5580 Series
Device Series
Cisco ASA 5580 Series
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco Adaptive Security Appliance
Software 8.1(1)
ANA 3.7.2-DP-1.0
Cisco Adaptive Security Appliance
Software 8.4.1
PN 3.7.3
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SCP
19
Cisco UEQAM
Cisco RF Gateway 10
Device Series
Software Version/Feature
Provided/Added in:
Cisco RF Gateway 10
IOS: 12.50(SQ) IOSXE:3.2.0
PN 4.0
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Level of Support/Limitations
 Running-config
 Startup-config
 Running-config – supports overwrite, merge mode
 Startup-config – supports overwrite mode
 Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Cisco Routers
Cisco 800 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 800 Series Routers
Cisco IOS 12.3.2-XA7,
Cisco IOS 15.1.3-T
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
WarmUpgrade
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
20
Cisco 1700 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 1700 Series Routers
Cisco IOS 12.3.14-T7,
Cisco IOS 12.4.25-d
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
21
Cisco 1800 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 1800 Series Routers
Cisco IOS 12.4.9-T,
Cisco IOS 15.1.1-T1
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
WarmUpgrade
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 2500 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 2500 device series
Cisco IOS 12.3.26
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
22
Cisco 2600 Series Multiservice Platform Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 2600 Series Multiservice Platform Routers
Cisco IOS 12.3-16a,
Cisco IOS 12.3.26
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SCP,FTP
Cisco 3700 Series Multiservice Access Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 3700 Series Multiservice Access Routers
Cisco IOS 12.4.9-T7
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SCP,FTP
Cisco 2800 Series Integrated Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 2800 Series Integrated Services Routers
Cisco IOS 12.3.14-YT1,
Cisco IOS 15.1.2_T1
PN 3.7.2
23
Features
Backup
Restore
Support
Yes
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
WarmUpgrade
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 2900 Series Integrated Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 2900 Series Integrated Services Routers
Cisco IOS 15.1(3)T
PN 3.7.2
Cisco IOS 15.4(1)T
PN 4.1 DP 1405
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 3800 Series Integrated Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 3800 Series Integrated Services Routers
Cisco IOS 12.4(24)T1
PN 3.7.1
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Yes
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
24
Features
Support
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
WarmUpgrade
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Level of Support/Limitations
Cisco 3900 Series Integrated Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 3900 Series Integrated Services Routers
Cisco IOS 15.1(3)T
PN 3.7.2
Cisco IOS 15.4(1)T
PN 4.1 DP 1405
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
WarmUpgrade
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Cloud Services Router (CSR) 1000V
Device Series
Software Version/Feature
Provided/Added in:
Cisco Cloud Services Router (CSR) 1000V
3.9.0aS
PN 4.0
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
Upgrade of CSR1000V hardware alone is supported using “.bin”.
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
25
Cisco 7200 Series Routers
Device Series
Cisco 7200 Series Routers
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 15.1(3)S
ANA 3.7.2/3.7.3 – DP 7.0
Cisco IOS 12.4(24)T
PN 3.7.1
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 7300 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco IOS 15.0(1)M,
Cisco IOS 15.1(3)S
ANA 3.7.2/3.7.3 – DP 7.0
Cisco 7300 device series
Cisco IOS 12.2.33-SB8a
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Activation
ISSU Support
Image Baseline
Supported
Protocol
Yes
Yes
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Yes
Yes
No
Yes
TFTP,SCP,FTP
26
Cisco 7600 Series Routers
Cisco 7600 Series Devices
Device Series
Cisco 7600 Series Routers
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 12.2(18)SXF16,
Cisco IOS 12.2(33)SRD4 ,
Cisco IOS 15.0(1)S1
PN 3.7.1
Cisco IOS 15.1(2)S2,
Cisco IOS 15.1(3)S
ANA 3.7.2/3.7.3 – DP 7.0
Cisco IOS 15.3(1)S1
PN 3.10.xTo3.11.x-DP1308,
PN 4.0 DP 1308
Cisco IOS 15.3(3)S
PN 4.1 DP 1405
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 7600 Series Routers with Application Control Engine (ACE) (ACE10-6500-K9 and ACE30-MOD-K9)
Device Series
Software Version/Feature
Provided/Added in:
ACE 4700
A1(7b)
ANA 3.7.2-DP-1.0
Cisco 7600 Series Routers with Application Control Engine
(ACE) (ACE10-6500-K9 and ACE30-MOD-K9)
A2(3.4)
PN 3.8
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Yes
Yes
Yes









Level of Support/Limitations
Running-config
Startup-config
Running-config – for ACE
Startup-config – for ACE
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Running-config – for ACE – supports only merge mode
Startup-config – for ACE – supports only overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
27
Features
Distribution
Support
Yes
Activation
ISSU Support
Image Baseline
Yes
No
Yes
Level of Support/Limitations
Cannot distribute the image on ACE card.
User has to copy ace image to 7600 device and use the ace image present on 7600 device flash while
activating image on ace card
As part of imagebaseline in addition to 7600 running image, all the running images from the ace cards will
be downloaded.
Supported Protocol: TFTP,FTP,SCP, SFTP(for ACE)
Cisco 10000 Series Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco 10000 Series Routers
Cisco IOS 12.2.33-SB8a,
Cisco IOS 12.2.31-SB9,
Cisco IOS 15.0(1)S
PN 3.7.1.1
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco 12000 Series Routers (IOS)
Device Series
Software Version/Feature
Provided/Added in:
Cisco 12000 Series Routers (IOS)
Cisco IOS 12.0.32-SY4
PN 3.7.1.1
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Yes
Yes
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Yes
28
Features
Support
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Level of Support/Limitations
Cisco XR 12000 Series Routers
Device Series
Cisco XR 12000 Series Routers
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS XR 3.7.0
PN 3.7.1
Cisco IOS XR 4.3.1
PN 4.0 DP 1308
Level of Support/Limitations
Running-config
Admin-config
Running-config – supports both overwrite and merge mode
Admin-config – supports both overwrite and merge mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default.
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Install add
Yes
Activation
Yes
ISSU Support
No
Deactivate
Yes
Remove
Yes
Rollback
Yes
Commit
Yes
Image Baseline
Yes
All the active packages will be imported.
Supported Protocol: TFTP,SFTP
Cisco CRS Carrier Routing System (CRS)
Device Series
Cisco CRS Carrier Routing System
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Yes
Software Version/Feature
Provided/Added in:
Cisco IOS XR 3.6.0
PN 3.7.1
Cisco IOS XR 4.0.0
PN 3.7.2
Cisco IOS XR 4.2.3,
Cisco IOS XR 4.3
PN 3.8, 3.9 DP 1305
Cisco IOS XR 4.3.1
PN 3.10.xTo3.11.x-DP1305,
PN 4.0 DP 1308
Cisco IOS XR 5.1.2
PN 4.1 DP 1405
Level of Support/Limitations
 Running-config
 Admin-config
 Running-config – supports both overwrite and merge mode
 Admin-config – supports both overwrite and merge mode
 Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default.
29
Features
Support
Level of Support/Limitations
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Install add
Yes
Activation
Yes
ISSU Support
Yes
Upgrade of SMU only supported.
Deactivate
Yes
Remove
Yes
Rollback
Yes
Commit
Yes
Image Baseline
Yes
All the active packages will be imported.
Supported Protocol: TFTP,SFTP
Cisco Aggregation Services Routers (ASR)
Cisco ASR 9000 Series Aggregation Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco IOS XR 3.9.0
PN 3.7.1
Cisco IOS XR 3.9.1
Cisco IOS XR 4.2.1
PN 3.10
Cisco IOS XR 4.2.3
ANA 38xDP 1305
Cisco IOS XR 4.3.0
Cisco ASR 9000 Series Aggregation Services Routers
Cisco IOS XR 4.3.1
PN 3.10.xTo3.11.x-DP1305
PN 4.0 DP 1308
Cisco IOS XR 4.3.2
PN 4.1 DP 1405
Cisco IOS XR 4.3.4
Cisco IOS XR 5.1.0
Cisco IOS XR 5.1.1
Cisco IOS XR 5.1.2
30
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Yes
Yes
Yes
Distribution
Install add
Activation
Yes
Yes
Yes
ISSU Support
Deactivate
Yes
Yes
Remove
Rollback
Commit
Image Baseline
Supported
Protocol:
Yes
Yes
Yes
Yes
Level of Support/Limitations





Running-config
Admin-config
Running-config – supports both overwrite and merge mode
Admin-config – supports both overwrite and merge mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default.
Apart from pie package(s) activation ccm also supports
 Synchronization of all satellites together which are connected to ASR9K
 Activation of the satellite pie image on Cisco ASR 9000 device with and without synchronization
of satellites option
Upgrade of SMU only supported.
All the active packages will be imported.
TFTP, SFTP
31
Cisco ASR 901 Series Aggregation Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco IOS 15.1(2)
PN 3.8.1
Cisco IOS 15.1(2)SNG
Cisco IOS 15.1(2)SNH
Cisco IOS 15.3(2)S
Cisco ASR 901 Series Aggregation Services Routers
PN 3.10.xTo3.11.x-DP1305
PN 4.0 DP 1308
Cisco IOS 15.3(2)S2
PN 3.10.xTo3.11.x-DP1308
PN 4.0 DP 1308
Cisco IOS 15.4(1)S
PN 4.1 DP 1405
Cisco IOS 15.4(2)S
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP, SCP
Cisco ASR 901S Series Aggregation Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco ASR 901S Series Aggregation Services Routers
Cisco IOS 15.4(1)S1
PN 4.1 DP 1405
Features
Backup
Support
Yes
Restore
Yes





Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
32
Cisco ASR 903 Series Aggregation Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco IOS 15.2(1)S
PN 3.8.1
Cisco IOS 15.2(1)S1
Cisco IOS 15.2(2)S
Cisco IOS XE 3.8
PN 3.10.xTo3.11.x-DP1305
Cisco IOS XE 3.9
Cisco ASR 903 Series Aggregation Services Routers
Cisco IOS XE 3.10
PN 3.10.xTo3.11.x-DP1308
Cisco IOS 15.3(3)S
PN 4.0 DP 1308
Cisco IOS 15.2(4)S3
Cisco IOS 15.3(2)S
Cisco IOS 15.4(1)S
PN 4.1 DP 1405
Cisco IOS 15.4(2)S
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Activation
Yes
Yes
Yes
Yes
Yes
ISSU Support
Yes
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Reload device in Sub-package mode is supported which is prerequisite for ISSU.
CCM supports booting in sub-package mode only through boot flash and not through any sub-directories of
boot flash
CCM supports ISSU only through boot flash and not through any sub-directories of boot flash
Cisco ASR 1000 Series Aggregation Services Routers
Device Series
Software Version/Feature
Provided/Added in:
Cisco ASR 1000 Series Aggregation Services Routers
Cisco IOS XE 2.6.2,
Cisco IOS XE 3.2,
Cisco IOS XE 3.1.0S
PN 3.7.1
Cisco IOS XE 3.4.0S
ANA 3.7.2/3.7.3 – DP 6.0
33
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco ASR 5000 Series Mobile Gateway
Device Series
Cisco ASR 5000 Series Mobile Gateway
Software Version/Feature
Provided/Added in:
Star OS 10.0
StarOs 11.0
StarOs 12.0
(For Demo purpose only , not for Production
Deployment)
ANA 3.7.2-DP-3.0
StarOS 12.2
PN 3.8.1
StarOS 12.3
PN 3.9
Star OS 14.0
PN 3.10.xTo3.11.x-DP1305
Star OS 14.1 MR
Star OS 15.0
PN 4.0 DP 1310
PN 3.10.xTo3.11.x-DP1310
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
No
Yes
Yes
Activation
Yes
Yes
Level of Support/Limitations
Running-config
Boot-config
Running-config – supports merge mode
Boot-config – restore to same boot file with overwrite mode, view/edit/compare –not applicable
 Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “boot-configuration”
Trap does not have User information. The “User” column will display as “N/A”.
In distribution flow there is an option to select Boot config which will be used for activation if user
schedules distribute and activate job together.
User can schedule the activation by selecting the image and boot priority.
Or user can edit the boot priorities by selecting “Perform Edit Boot Priorities” option.
As part of edit boot priorities user can delete, add and modify boot priorities.
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SFTP
34
Cisco MWR 2900 Series Mobile Wireless Routers
Device Series
Cisco MWR 2900 Series Mobile Wireless Routers
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 12.2(33)MRA
PN 3..1
Cisco IOS 15.1(1)MR
3.7.2/3.7.3 – DP 7.0
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP, FTP, SCP
Cisco Switches
Cisco ME 3400 Series Ethernet Access Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco ME 3400 Series Ethernet Access Switches
Cisco IOS 12.2(25)SEG3,
Cisco IOS 12.2(53)SE
PN 3.7.1
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
35
Cisco ME 3600X Ethernet Access Switches
Device Series
Cisco ME 3600X Ethernet Access Switches
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS12.2(52)EY
PN 3.7.1.1
Cisco IOS 15.3(2)S
PN 3.10.xTo3.11.x-DP1305,
PN 4.0 DP 1308
Cisco IOS 15.3(3)S
PN 4.1 DP 1405
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco ME 3800X Carrier Ethernet Switches
Device Series
Cisco ME 3800X Carrier Ethernet Switches
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS12.2(52)EY
PN 3.7.1.1
Cisco IOS 15.3(2)S
PN 3.10.xTo3.11.x-DP1305,
PN 4.0 DP 1308
Cisco IOS 15.3(3)S
PN 4.1 DP 1405
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
36
Cisco ME 4600 Series Multiservice Optical Access Platform
Device Series
Software Version/Feature
Provided/Added in:
Cisco ME 4600 Series OLT
v3.1.0-s3.r145
PN 4.1 (New!)
Features
Backup
Support
Yes
Restore
Yes






Synchronize
No
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
No
Supported Protocol: TFTP
IPv6 support: N/A
Level of Support/Limitations
Running-config
Running configuration is binary format. Not allowed to view/compare/edit Running configuration.
Running-config – supports in overwrite mode
Device will be re-booted after restore operation.
If device does not come up within 1 hour, Restore job will be shown as failed even though the actual
restore operation might be happened on the device
CCM may not fetch the latest running configuration from device after reboot if the device takes long
time (5 minutes or more) to initiate the reboot or if the VNE is displayed as proper
state(communication/investigation state) in Prime Network Administration
The trap does not have User information. The “User” column will display as “N/A”.
Both OLT and ONU distribution is supported.
Both OLT and ONU activation is supported. For ONU bulk upgrade is supported.
Cisco ME 6500 Series Ethernet Switches (cisco6524)
Device Series
Software Version/Feature
Provided/Added in:
Cisco ME 6500 Series Ethernet Switches (cisco6524)
Cisco IOS 12.2.33-SX13
PN 3.7.1.1
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 2900 Series Switches
Device Series
Cisco Catalyst 2900 Series Switches
Software Version/Feature
Provided/Added in:
Cisco IOS 15.1(1)MR
ANA 3.7.2/3.7.3 – DP 7.0
Cisco IOS 12.1.22-EA6,
Cisco IOS 15.1.3-T
PN 3.7.2
37
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 3500XL Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Catalyst 3500XL Series Switches
Cisco IOS 12.0.5-WC17
PN 3.7.2
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SCP,FTP
Cisco Catalyst 3550 Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Catalyst 3550 Series Switches
Cisco IOS 12.2.44-SE6,
Cisco IOS 12.2.53-SE2
PN 3.7.2
38
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 3560 Series Switches
Device Series
Cisco Catalyst 3560 Series Switches
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 12.2.53-SE2,
Cisco IOS 12.2.44-SE6
PN 3.7.2
Cisco IOS 15.0(2)SE1
ANA 38x DP 1307
Cisco IOS 15.0(2)SE6
PN 4.1 DP 1405
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 3750 Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Catalyst 3750 Series Switches
Cisco IOS 12.2.55-SE
PN 3.7.2
39
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 3750 Metro Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Catalyst 3750 Metro Series Switches
Cisco IOS 12.2(52)SE
PN 3.7.1
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
40
Cisco Catalyst 4500 Series Switches
Device Series
Cisco Catalyst 4500 Series Switches
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 12.2(53)SG,
Cisco IOS 12.2(54)SG194
PN 3.7.1
Cisco IOS 15.0(2)SG XE 3.2.0SG
ANA 3.7.2/3.7.3 – DP 8.0
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 4900 Series Ethernet Switches
Device Series
Software Version/Feature
Provided/Added in:
PN 3.7.1.1
Cisco Catalyst 4900 Series Ethernet Switch
Cisco IOS 12.2.(50)SG6,
Cisco IOS 12.2(53)SG,
Cisco IOS 12.2(54)SG
Cisco IOS 15.0(2)SG
ANA 3.7.2/3.7.3 – DP 8.0
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
41
Cisco Catalyst 6500 Series Switches (IOS)
Device Series
Cisco Catalyst 6500 Series Switches (IOS)
Features
Backup
Support
Yes
Restore
Yes





Software Version/Feature
Provided/Added in:
Cisco IOS 12.2(50)SY
ANA 3.7.2/3.7.3 – DP 7.0
Cisco IOS 12.2.33-SX14
PN 3.7.1.1
Cisco IOS 12.2(33)SXI3
PN 3.7.1
Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
Startup-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
Cisco Catalyst 6500 Virtual Switching System (VSS)
Device Series
Software Version/Feature
Provided/Added in:
Cisco Catalyst 6500 Virtual Switching System (VSS)
IOS 12.2.33-SXI2a
PN 4.0
IOS 15.1(1)SY
PN 38x DP 1307
IOS 15.1(1)SY2
PN 4.1 DP 1405
IOS 15.1(1)SY3
Features
Backup
Support
Yes
Restore
Yes





Level of Support/Limitations
Running-config
Startup-config
Running-config – supports overwrite, merge mode
-config – supports overwrite mode
Edit and restore / Edited Config Archive restore:
Configuration deploy mode will be “Merge” by default for “Running-configuration”
Configuration deploy mode will be “Overwrite” by default for “startup-configuration”
Synchronize
Yes
Change log
Yes
Configuration
Yes
Export
Distribution
Yes
Activation
Yes
Should not use the image present in standby- or aliases of flash for activation.
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,FTP,SCP
42
Cisco Nexus Series Switches
Cisco Nexus 1000v Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Nexus 1000v Series Switches
4.2(1)SV2(1.1
PN 4.0
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Yes
Yes
Yes
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP, SFTP





Level of Support/Limitations
Startup Configuration
Running Configuration
Overwrite mode is not supported for restore to running configuration
Restore to Startup configuration supports only in Overwrite mode.
Edit Restore and Edited Archive restore is performed in Merge mode for restoring to running
configuration and in overwrite mode for restoring to startup configuration.
As part of distribution job user can select compatible image in addition to the image selected. Selection of
compatible image is optional.
Upgrade of vsm alone is supported. User has to select to select both system and kickstart image.
Cisco Nexus 3000 Series Switches
Device Series
Software Version/Feature
Provided/Added in:
Cisco Nexus 3000 Series Switches
5.0 (U5)
PN 4.0
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Yes
Yes
Yes
Activation
ISSU Support
Image Support
Supported
Protocol:
Yes
No
Yes
Yes





Level of Support/Limitations
Startup Configuration
Running Configuration
Overwrite mode is not supported for restore to running configuration
Restore to Startup configuration supports only in Overwrite mode.
Edit Restore and Edited Archive restore is performed in Merge mode for restoring to running
configuration and in overwrite mode for restoring to startup configuration.
As part of distribution job user can select compatible image in addition to the image selected. Selection of
compatible image is optional
User has to select to select both system and kickstart image.
TFTP, SCP
43
Cisco Nexus 5000 Series Switches
Device Series
Cisco Nexus 5000 Series Switches
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Yes
Yes
Yes
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SFTP





Software Version/Feature
Provided/Added in:
Cisco NX-OS 5.0(2)N2(1)
PN 3.8
5.0(2)N2(1)
5.0(2)N1(1)
ANA 3.8x DP2.0
Level of Support/Limitations
Startup Configuration
Running Configuration
Overwrite mode is not supported for restore to running configuration
Restore to Startup configuration supports only in Overwrite mode.
Edit Restore and Edited Archive restore is performed in Merge mode for restoring to running
configuration and in overwrite mode for restoring to startup configuration.
As part of distribution job user can select compatible image in addition to the image selected. Selection of
compatible image is optional
User has to select to select both system and kickstart image.
Cisco Nexus 7000 Series Switches
Device Series
Cisco Nexus 7000 Series Switches
Features
Backup
Support
Yes
Restore
Yes
Synchronize
Change log
Configuration
Export
Distribution
Yes
Yes
Yes
Yes
Activation
Yes
ISSU Support
No
Image Baseline
Yes
Supported Protocol: TFTP,SFTP







Software Version/Feature
Provided/Added in:
Cisco NX-OS 5.0(3)
PN 3.8
Cisco NX-OS 5.2(X)
ANA 38x DP2.0
Level of Support/Limitations
Startup Configuration – for each VDC
Running Configuration– for each VDC
Startup Configuration – for each VDC
Running Configuration– for each VDC
Overwrite mode is not supported for restore to running configuration
Restore to Startup configuration supports only in Overwrite mode.
Edit Restore and Edited Archive restore is performed in Merge mode for restoring to running
configuration and in overwrite mode for restoring to startup configuration.
As part of distribution job user can select compatible image in addition to the image selected. Selection of
compatible image is optional
User has to select to select both system and kickstart image.
44
Support for Command Scripts in 4.1
The following tables provide device support information for Prime Network command scripts. These scripts can
be launched from the Vision client by right-clicking an NE and choosing Commands. Please note the following:
• Scripts may be updated in later releases to support additional script attributes.
• A command may be listed as supported on a general operating system (“Cisco IOS devices”), and the
same command may be listed as supported on a specific operation system version (“Cisco IOS 15.3(1)”).
This indicates that while the command is supported on all IOS versions, it was explicitly tested on the IOS
15.3.(1) version. It does not mean the other versions are not supported.
Optical Commands
Optical Command
Profiles:
Create VoIP Profile
Modify VoIP Profile
Delete VoIP Profile
Create Ethernet Profile
Modify Ethernet Profile
Delete Ethernet Profile
Show Ethernet Profile
Create Upstream DBA Profile
Modify Upstream DBA Profile
Delete Upstream DBA Profile
Show Upstream DBA Profile
Create ONU Profile
Modify ONU Profile
Delete ONU Profile
ClassOfService:
Modify Class Of Service
Services:
Create Network Services
Modify Network Services
Delete Network Services
Show Network Services
Create ONU Services
Modify ONU Services
Delete ONU Services
Show ONU Services
Software Upgrade:
Modify ONU Software Upgrade Mode
ONU Physical Inventory:
Show Ethernet Ports
Modify Ethernet Ports
Show Analog RF Ports
Modify Analog RF Ports
Show VoIP Ports
Modify VoIP Ports
Modify ONU System Interfaces
Show ONUs Status
Device Series
Cisco ME 4600 Series OLT
Device OS
v3.1.0-s3.r114
Provided in:
4.1 (New!)
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
45
Routing Protocol Commands
Routing Protocol Command
IS-IS:
Show ISIS Configuration
Create ISIS Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
IS-IS:
Show ISIS Configuration
Create ISIS Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
IS-IS:
Show ISIS Configuration (new attributes)
Create ISIS Router (new attributes)
Create ISIS Address Family (new attributes)
Create ISIS Interface (new attributes)
IS-IS:
Create ISI S Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
IS-IS:
Show ISIS Configuration
Device Series
Cisco ME 3600X Carrier Ethernet
Switches
Device OS
IOS 15.3(2)S
IOS 15.3(3)S
Provided in:
4.1 (New!)
Cisco ME 3800X Carrier Ethernet
Switches
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ASR 901 Series Aggregation
Services Routers
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ASR 901 Series Aggregation
Services Routers
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
4.1 (legacy)
Cisco ASR 901 Series Aggregation
Services Routers
4.1 (legacy)
IS-IS:
Create ISIS Router (new attributes)
Create ISIS Address Family (new attributes)
Create ISIS Interface (new attributes)
IS-IS:
Create ISI S Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
Cisco ASR 903 Series Aggregation
Services Routers
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(2)S
IOS 15.3(3)S
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
4.1 (legacy)
Cisco ASR 903 Series Aggregation
Services Routers
4.1 (New!)
46
Routing Protocol Command
IS-IS:
Show ISIS Configuration
Device Series
Cisco ASR 903 Series Aggregation
Services Routers
Device OS
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.3.0
IOS XR 4.3.1
Provided in:
4.1 (legacy)
IS-IS:
Show ISIS Configuration
Create ISIS Router (new attributes)
Create ISIS Address Family (new attributes)
Modify ISIS Address Family (new attributes)
Delete ISIS Address Family (new attributes)
Create ISIS Interface (new attributes)
IS-IS:
Create ISI S Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
IS-IS:
Show ISIS Configuration
Create ISIS Router
Modify ISIS Router
Delete ISIS Router
Create ISIS Address Family
Modify ISIS Address Family
Delete ISIS Address Family
Create ISIS Interface
Modify ISIS Interface
Delete ISIS Interface
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Show OSPF ON Interface
Create OSPF ON Interface
Configure OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Show OSPF ON Interface
Create OSPF ON Interface
Configure OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
Cisco ASR 9000 Series Routers
Cisco ASR 9000 Series Routers
IOS XR 4.2.3
IOS XR 4.3.0
IOS XR 4.3.1
4.1 (legacy)
Cisco 7600 Series Routers
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ME 3600X Carrier Ethernet
Switches
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ME 3800X Carrier Ethernet
Switches
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
4.1 (New!)
47
Routing Protocol Command
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Show OSPF ON Interface
Create OSPF ON Interface
Configure OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
Show OSPF Database
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Configure OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Show OSPF Neighbor
Show OSPF On Interface
Create OSPF ON Interface
Delete OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
Show OSPF Database
OSPF:
Show OSPF Process
Create OSPF Process
Modify OSPF Process
Delete OSPF Process
Create OSPF Network
Delete OSPF Network
Show OSPF On Interface
Create OSPF ON Interface
Configure OSPF ON Interface
Create OSPF Passive Interface
Delete OSPF Passive Interface
Show OSPF Database
BGP:
Create BGP Router
Modify BGP Router
Delete BGP Router
Create BGP Address Family
Modify BGP Address Family
Delete BGP Address Family
Create BGP Neighbor
Modify BGP Neighbor
Delete BGP Neighbor
Device Series
Cisco ASR 901 Series Aggregation
Services Routers
Device OS
IOS 15.3(2)S
IOS 15.3(3)S
Provided in:
4.1 (New!)
Cisco ASR 903 Series Aggregation
Services Routers
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ASR 9000 Series Routers
IOS XR 4.3.0
IOS XR 4.3.1
4.1 (New!)
Cisco 7600 Series Routers
IOS 15.3(2)S
IOS 15.3(3)S
4.1 (New!)
Cisco ASR 901 Series Routers
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
4.1 (legacy)
48
Routing Protocol Command
BGP:
Create BGP Router
Modify BGP Router
Delete BGP Router
Create BGP Address Family
Modify BGP Address Family
Delete BGP Address Family
Create BGP Neighbor
Modify BGP Neighbor
Delete BGP Neighbor
BGP:
Create BGP Router
Modify BGP Router
Delete BGP Router
Create BGP Address Family
Modify BGP Address Family
Delete BGP Address Family
Create BGP Neighbor
Modify BGP Neighbor
Delete BGP Neighbor
Device Series
Cisco ASR 903 Series Routers
Device OS
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
Provided in:
4.1 (legacy)
Cisco ASR 9000 Series Routers
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
49
Ethernet-OAM (E-OAM) Commands
E-OAM Command
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
Device Series
Cisco MWR 2900 Series Mobile
Wireless Routers
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
Cisco Mobile Wireless Router 2941
(CFM Cisco draft mode)
Device OS
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
Provided in:
4.1 (legacy)
4.1 (legacy)
50
E-OAM Command
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Device Series
Cisco ME 3400 Series Ethernet
Access Switches
Device OS
IOS 12.2(52)SE
IOS 12.2(53)SE
IOS 12.3(22)S
IOS 12.3(23)
IOS 12.3(23)S1
IOS 12.3(23)S2
IOS 12.3(23)S3
IOS 12.2(54)SE
IOS 12.2(55)SE
IOS 12.2(58)SE
IOS 12.2(58)SE1
IOS 12.2(58)SE2
IOS 12.2(58)EX
Provided in:
4.1 (legacy)
Cisco ME 3600X Carrier Ethernet
Switches
IOS 12.0(0.20)T
IOS 12.0(3)T3
IOS 12.0(4)T
IOS 12.0(5)
IOS 12.0(5)T1
IOS 12.0(6.5)T3
IOS 12.0(7)XK1
IOS 12.1(20)
IOS 12.2(12)
IOS 12.2(4)T1
IOS 12.2(8)T5
IOS 12.2(27)
4.1 (legacy)
Cisco ME 3800X Carrier Ethernet
Switches
IOS 12.2(52)SE
IOS 12.2(52)EY
IOS 12.2(52)EY1
IOS 12.2(52)EY2
IOS 15.1(2)EY
IOS 12.2(52)EY3
IOS 15.2(2)
IOS 15.2(2)S1
IOS 15.2(4)S
4.1 (legacy)
Cisco ME 3750 Series Ethernet
Access Switches
IOS 12.2(25)EY3
IOS 12.2(25)SEC2
IOS 12.2(52)SE
IOS 12.2(50)SE
IOS 12.2(53)SE2
4.1 (legacy)
51
Diagnose CFM with Ping Remote MEP with MPID
E-OAM Command
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
E-OAM Command
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
Device Series
Device OS
Provided in:
4.1 (legacy)
Device Series
Cisco 2900 Series Integrated Service
Routers (ISR)
Device OS
IOS 15.1(1)T
IOS 15.1(1)T1
IOS 15.1(1)T2
IOS 15.1(3)T
IOS 15.1(1)T3
IOS 15.2(1)T1
Provided in:
4.1 (legacy)
Cisco 3900 Series Integrated
Services Routers
IOS 15.1(1)T
IOS 15.1(1)T1
IOS 15.1(1)T2
IOS 15.1(3)T
IOS 15.1(1)T3
IOS 15.2(1)T1
4.1 (legacy)
Catalyst 6500 Series (IOS) Switches
IOS 12.1
IOS 12.1(13)E6
IOS 12.1(20)E3
IOS 12.2
IOS 12.2(17d)SXB
IOS 12.2(18)SXD2
IOS 12.2(18)SXD5
IOS 12.2(18)SXE
IOS 12.2(18)SXF
IOS 12.2(18)SXF7
IOS 12.2(33)
IOS 12.2(33)SRA
IOS 12.2(33)SRA6
IOS 12.2(33)SRD1
IOS 12.2(33)SRD2
IOS 12.2(33)SRD3Q
IOS 12.2(33)SRE
IOS 12.2(33)SRE 1
IOS 12.2(33)SXH
IOS 12.2(33)SXH1
IOS 12.2(33)SXH2
IOS 12.2(33)SXH2a
IOS 12.2(33)SXI
4.1 (legacy)
52
E-OAM Command
E-OAM Command
CFM/Y1731:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM/Y1731:
Delete Global CFM
Modify Global CFM
Configure CFM Service
Delete CFM Domain
Delete CFM Service
Modify CFM Service
Operation Trigger On AIS/LCK
Configure Interface AIS/LCK
Modify Interface AIS/LCK
Show Ethernet CFM SMEP
Show Ethernet CFM Error
CFM/Y1731:
Delete Global CFM
Modify Global CFM
Configure CFM Service
Delete CFM Domain
Delete CFM Service
Modify CFM Service
Operation Trigger On AIS/LCK
Configure Interface AIS/LCK
Modify Interface AIS/LCK
Show Ethernet CFM SMEP
Show Ethernet CFM Error
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Device Series
Device Series
Cisco 7600 Series Routers
Cisco ASR 901 Series Routers
Cisco ASR 903 Series Routers
ASR 1000 (CFM 802.1ag/EFM
802.3ah)
starts with 12.2(SIERRA)
IOS 12.2(33)SXI5
Device OS
IOS 12.2(33)SXI2a
IOS 12.2(33)SXH8
IOS 12.2(18)SXF17a
IOS 12.2(50)SY
IOS 12.2(33)SRE5
Device OS
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
IOS 15.3(3)S
Provided in:
Provided in:
4.1 (legacy)
PN 4.1 DP
1405
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
4.1 (legacy)
IOS 15.4(2)S
PN 4.1 DP
1405
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2)
XE3.10
XE 3.12
4.1 (legacy)
IOS 12.1(27)
IOS 12.1(22)
4.1 (legacy)
PN 4.1 DP
1405
53
E-OAM Command
Device Series
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
E-OAM Command
Device Series
CFM/Y1731:
Cisco ASR 9000 Series Routers
Configure CFM Maintenance Domain
(CFM IEEE 802.1ag (draft 8.1))
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
Device OS
Device OS
IOS XR 3.7.3
IOS XR 3.9.0
IOS XR 3.9.1
IOS XR 3.9.2
IOS XR 4.0.0
IOS XR 4.0.1
IOS XR 4.0.3
IOS XR 4.0.4
IOS XR 4.1.0
IOS XR 4.1.1
IOS XR 4.1.2
IOS XR 4.2.0
IOS XR 4.2.1
IOS XR 4.2.2
IOS XR 4.2.3
IOS XR 5.1.2
Cisco XR 12000 Cisco CRS Series
Routers
IOX 4.1.0
IOX 4.1.1
IOX4.2.0
IOX4.2.1
IOX4.2.3
IOX 4.2.4
IOX 4.3.0
IOX 4.3.1
IOX 4.1.2
Cisco Carrier Packet Transport (CPT
200/600) System
ONS 9.7
Provided in:
Provided in:
4.1 (legacy)
PN 4.1 DP
1405
4.1 (legacy)
PN 4.1 DP
1405
54
E-OAM Command
CFM:
Configure CFM Maintenance Domain
Configure CFM Global Parameters
Configure CFM Maintenance Intermediate Point (MIP)
Configure CFM Continuity Check
Configure CFM Service ID
Configure CFM Maintenance endpoints (MEP)
Enable CFM Continuity Check
Enable CFM SNMP Server Traps
Diagnose CFM with Show MEP Status
Diagnose CFM with Show MEP Crosscheck Status
Diagnose CFM with Ping Remote MEP with MAC
Diagnose CFM with Ping Remote MEP with MPID
Diagnose CFM with Ping Remote MEP with Multicast
Diagnose CFM with Traceroute Remote MEP with MAC
Diagnose CFM with Traceroute Remote MEP with MPID
CFM/Y1731:
Delete Global CFM
Modify Global CFM
Configure CFM Service
Delete CFM Domain
Delete CFM Service
Modify CFM Service
Operation Trigger On AIS/LCK
Configure Interface AIS/LCK
Modify Interface AIS/LCK
Show Ethernet CFM SMEP
Show Ethernet CFM Error
CFM/Y1731:
Delete Global CFM
Modify Global CFM
Configure CFM Service
Delete CFM Domain
Delete CFM Service
Modify CFM Service
Operation Trigger On AIS/LCK
Configure Interface AIS/LCK
Modify Interface AIS/LCK
Show Ethernet CFM SMEP
Show Ethernet CFM Error
Device Series
Cisco Carrier Packet Transport (CPT
50) System
Device OS
IOS 15.2(2)SC.7
Provided in:
PN 4.1 DP
1405
Cisco ME 3600X Carrier Ethernet
Switches
IOS 15.4(2)S
PN 4.1 DP
1405
Cisco ME 3800X Carrier Ethernet
Switches
IOS 15.4(2)S
PN 4.1 DP
1405
Device Series
Cisco Carrier Packet Transport (CPT
200/600) System
Device OS
ONS 9.30
ONS 9.50
ONS 9.51
ONS 9.511-514
ONS 9.52
ONS 9.522
ONS 9.7
Provided in:
4.1 (legacy)
Ethernet Commands
Ethernet Command
REP:
Show REP segment information
REP:
Show REP segment information
Cisco Carrier Packet Transport (CPT
50) System
15.2(2)SC.7
PN 4.1 DP
1405
PN 4.1 DP
1405
55
Ethernet Command
REP:
Show REP segment information
Device Series
Cisco MWR 2941 Mobile Wireless
Routers 2941
REP:
Show REP segment information
Cisco ME 3600X and Cisco ME
3800X Carrier Ethernet Switches
REP:
Show REP segment information
Cisco ME 6524 Ethernet Switch
REP:
Show REP segment information
REP:
Show REP segment information
All Cisco Catalyst Switches
Cisco 7600 Series Routers
Device OS
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
IOS 12.0(0.20)T
IOS 12.0(3)T3
IOS 12.0(4)T
IOS 12.0(5)
IOS 12.0(5)T1
IOS 12.0(6.5)T3
IOS 12.0(7)XK1
IOS 12.1(20)
IOS 12.2(12)
IOS 12.2(4)T1
IOS 12.2(8)T5
IOS 12.2(27)
IOS 12.3(14)T
IOS 12.3(14)T7
IOS 12.4(11)T
IOS 12.4(22)T
IOS 12.4(24)T
IOS 15.0M
IOS 15.1(1)T
IOS 15.1(2)T
IOS 15.1(3)T
IOS 12.2
IOS 12.2(18)ZU
IOS 12.2(18)ZU1
IOS 12.2(18)ZU2
IOS 12.2(33)SXI
All versions supported by
Prime Network
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
56
Ethernet Command
mLACP:
Show Group
Show MPLS LDP
Show Channel
Show LACP internal
Device Series
Cisco 7600 Series Devices
Device OS
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
IOS 12.1(27)
IOS 12.1(22)
Provided in:
4.1 (legacy)
mLACP:
Show Group
Show MPLS LDP
Show Channel
Show LACP internal
mLACP:
Show Group
Show MPLS LDP
Show Channel
Show LACP internal
Cisco ASR 1000 Series Routers
I OS XR 3.7.3
IOS XR 3.9.0
IOS XR 3.9.1
IOS XR 3.9.2
IOS XR 4.0.0
IOS XR 4.0.1
IOS XR 4.0.3
IOS XR 4.0.4
IOS XR 4.1.0
IOS XR 4.1.1
IOS XR 4.1.2
IOS XR 4.2.0
IOS XR 4.2.1
IOS XR 4.2.2
IOS XR 4.2.3
NX-OS 4.2(1)N1(1.1j)
4.1 (legacy)
vPC:
Show vPC
Show vPC Consistency Parameters
Show Port Channel Capacity
vPC:
Show vPC
Show vPC Consistency Parameters
Show Port Channel Capacity
vPC:
Show vPC
Show vPC Consistency Parameters
Show Port Channel Capacity
vPC:
Show vPC
Show vPC Consistency Parameters
Show Port Channel Capacity
Cisco Unified Computing System
(UCS)
Cisco Nexus 1000V Network
Element
NX-OS 4.2(1)SV1(5.1)
NX-OS 4.2(1)SV1(4a)
NX-OS 4.2(1)SV1(5.1a)
4.1 (legacy)
Cisco Nexus 5000 Network Element
NX-OS 4.1(3)N2(1a))
NX-OS 4.2(1)N2(1)
NX-OS 5.0(2)N2(1)
NX-OS 5.0(2)N1(1)
NX-OS 4.2(2)
NX-OS 4.2(3)
NX-OS 4.2(4)
NX-OS 5.0(3)
NX-OS 5.0(5)
NX-OS 5.1(1)
NX-OS 4.2(6)
NX-OS 6.0.2
NX-OS 5.2.1
Nx-OS 6.1(1)
NX-OS 4.2(1)N1(1.1j)
4.1 (legacy)
FabricPath:
FabricPath Conflict
MAC Address-Table Learning Mode
FabricPath:
FabricPath Conflict
MAC Address-Table Learning Mode
Cisco Unified Computing System
(UCS)
Star OS 12.2
4.1 (legacy)
Cisco ASR 9000 Series Routers
Cisco Nexus 7000 Network Element
Cisco ASR 5000 Series Mobile
Gateway
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
57
IP Commands
IP Command
VRRP:
Create VRRP Group
Modify VRRP Group
Delete VRRP Group
Device Series
Cisco ASR 901 Series Routers
Device OS
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
Provided in:
4.1 (legacy)
IPSLA:
Create ICMP Echo
Modify ICMP Echo
Create ICMP Path Jitter
Modify ICMP Path Jitter
Create UDP Echo
Modify UDP Echo
Create UDP Jitter
Modify UDP Jitter
Create Responder
Delete Responder
Show Responder
Create Schedule
Delete Schedule
Delete IPSLA
Show IPSLA
IPSLA:
Create ICMP Echo
Modify ICMP Echo
Create ICMP Path Jitter
Modify ICMP Path Jitter
Create UDP Echo
Modify UDP Echo
Create UDP Jitter
Modify UDP Jitter
Create Responder
Delete Responder
Show Responder
Create Schedule
Delete Schedule
Delete IPSLA
Show IPSLA
IPSLA:
Create ICMP Echo
Modify ICMP Echo
Create ICMP Path Jitter
Modify ICMP Path Jitter
Create UDP Echo
Modify UDP Echo
Create UDP Jitter
Modify UDP Jitter
Create Responder
Delete Responder
Show Responder
Create Schedule
Delete Schedule
Delete IPSLA
Show IPSLA
IPSLA:
Modify Responder
Cisco ASR 901 Series Routers
Cisco Carrier Packet Transport (CPT
200/600) System
ONS 9.7
PN 4.1 DP
1405
Cisco Carrier Packet Transport (CPT
50) System
15.2(2)SC.7
PN 4.1 DP
1405
Cisco ASR 901 Series Routers
IOS 15.3(1)S
IOS 15.2(2r)SNH1
4.1 (legacy)
4.1 (legacy)
58
IP Command
Create Group Schedule
Modify Group Schedule
Show Group Schedule
IP Command
IPSLA:
Create ICMP Echo
Modify ICMP Echo
Create ICMP Path Jitter
Modify ICMP Path Jitter
Create UDP Echo
Modify UDP Echo
Create UDP Jitter
Modify UDP Jitter
Create Responder
Delete Rsponder
Show Responder
Create Schedule
Delete Schedule
Delete IPSLA
Show IPSLA
IPSLA:
Modify Responder
Create Group Schedule
Modify Group Schedule
Show Group Schedule
CGNAT:
Add Static Port Forwarding
Add NAT 64 Forwarding
Add 6rd Forwarding
Delete Static Port Forwarding
Show Pool Utilization
Device Series
Device OS
IOS 15.3(2)S2
XE 3.9.2
XE3.10
Provided in:
Device Series
Cisco ASR 903 Series
Device OS
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2)
XE3.10
Provided in:
4.1 (legacy)
Cisco ASR 903 Series Routers
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
IOS 4.3.1
4.1 (legacy)
CRS Series Routers
4.1 (legacy)
PN 4.1 DP
1405
4.1 (legacy)
IP Pools:
Show IP Pool
Delete IP Pool
Modify IP Pool
Create IP Pool
Cisco ASR 5000 Series Mobile
Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
BNG/DHCP:
Modify DHCP Service
Show DHCP Service
Modify DHCP Global Circuit ID
Show DHCP Global Circuit ID
BNG/DHCP:
Create DHCP
Delete DHCP
Modify DHCP
Show DHCP
Show DHCP Binding
Show IP Subscriber Management Trace
Show PPoE Trace
Show Subscriber
Create Subscriber
Delete Subscriber
Modify Subscriber
Show Subscriber Dynamic Template Trace All
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (legacy)
Cisco ASR 5000 Series Mobile
Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
59
IP Command
Show Subscriber Manager Session History
Show Subscriber Manager Trace
Show Subscriber Session Details by Filter
Device Series
IP Command
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Device Series
Cisco MWR 2941 Mobile Wireless
Routers
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Cisco ME 3400 Series Ethernet
Access Switches
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Cisco ME3600X and Cisco ME3800X
Carrier Ethernet Switches
Device OS
Device OS
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
IOS 12.2(52)SE
IOS 12.2(53)SE
IOS 12.3(22)S
IOS 12.3(23)
IOS 12.3(23)S1
IOS 12.3(23)S2
IOS 12.3(23)S3
IOS 12.2(54)SE
IOS 12.2(55)SE
IOS 12.2(58)SE
IOS 12.2(58)SE1
IOS 12.2(58)SE2
IOS 12.2(58)EX
IOS 12.0(0.20)T
IOS 12.0(3)T3
IOS 12.0(4)T
IOS 12.0(5)
IOS 12.0(5)T1
IOS 12.0(6.5)T3
IOS 12.0(7)XK1
IOS 12.1(20)
IOS 12.2(12)
IOS 12.2(4)T1
IOS 12.2(8)T5
IOS 12.2(27)
IOS 12.3(14)T
IOS 12.3(14)T7
IOS 12.4(11)T
IOS 12.4(22)T
IOS 12.4(24)T
IOS 15.0M
IOS 15.1(1)T
IOS 15.1(2)T
IOS 15.1(3)T
Provided in:
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
60
IP Command
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Device Series
Cisco Catalyst 3750 Metro Series
Switches
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Cisco Catalyst 6500 Series (IOS)
Switches
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Cisco 7600 Series Routers
Device OS
IOS 12.2(25)EY
IOS 12.2(25)EY3
IOS 12.2(25)SEB4
IOS 12.2(25)SEG1
IOS 12.2(35)SE
IOS 12.2(37)SE*
IOS 12.2(37)SE1
IOS 12.2(40)SE
IOS 12.2(44)SE1
IOS 12.2(46)SE
IOS 12.2(50)SE
IOS 12.2(52)SE
12.2(53)SE
12.2(54)SE
12.2(55)SE
12.2(58)SE
12.2(58)SE1
IOS 12.1
IOS 12.1(13)E6
IOS 12.1(20)E3
IOS 12.2
IOS 12.2(17d)SXB
IOS 12.2(18)SXD2
IOS 12.2(18)SXD5
IOS 12.2(18)SXE
IOS 12.2(18)SXF
IOS 12.2(18)SXF7
IOS 12.2(33)
IOS 12.2(33)SRA
IOS 12.2(33)SRA6
IOS 12.2(33)SRD1
IOS 12.2(33)SRD2
IOS 12.2(33)SRD3Q
IOS 12.2(33)SRE
IOS 12.2(33)SRE 1
IOS 12.2(33)SXH
IOS 12.2(33)SXH1
IOS 12.2(33)SXH2
IOS 12.2(33)SXH2a
IOS 12.2(33)SXI
starts with 12.2(SIERRA)
IOS 12.2(33)SXI5
IOS 12.2(33)SXI2a
IOS 12.2(33)SXH8
IOS 12.2(18)SXF17a
IOS 12.2(50)SY
IOS 12.2(33)SRE5
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
61
IP Command
E-LMI:
Global E-LMI
Enable On Interface
Configure to Multipoint To Multipoint or Point To Point
EVC
Configure UNI in an Interface
Configure Service Instance Vlan Id on Interface
Device Series
Cisco ASR9000 Series Routers
Device OS
IOX 3.7.3
IOX 3.9.0
IOX 3.9.1
IOX 3.9.2
IOX 4.0.0
IOX 4.0.1
IOX 4.0.3
IOX 4.0.4
IOX 4.1.0
IOX 4.1.1
IOX 4.1.2
IOX 4.2.0
IOX 4.2.1
IOX 4.2.2
IOX 4.2.3
ONS 9.30
ONS 9.50
ONS 9.51
ONS 9.511-514
ONS 9.52
ONS 9.522
ONS 9.7
Provided in:
4.1 (legacy)
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco Carrier Packet Transport (CPT
200/600) System
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco Carrier Packet Transport (CPT
50) System
IOS 15.2(2)SC.7
Cisco 1900 Series Integrated
Services Routers
IOS 15.1(1)T
IOS 15.1(1)T1
IOS 15.1(1)T2
IOS 15.1(3)T
IOS 15.1(1)T3
4.1 (legacy)
Cisco 2900 Series Integrated
Services Routers
4.1 (legacy)
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Cisco 3900 Series Integrated
Services Routers
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
IOS 15.1(1)T
IOS 15.1(1)T1
IOS 15.1(1)T2
IOS 15.1(3)T
4.1 (legacy)
PN 4.1 DP
1405
PN 4.1 DP
1405
4.1 (legacy)
62
IP Command
Enable E-LMI on interface
IP Command
Start/Stop Remote Loopback
IP Command
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Device Series
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco Catalyst 3750 Metro Series
Switches
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco ME 3400 Series Ethernet
Access Switches
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco ME 3600X Ethernet Access
Switches
Device Series
Device Series
Cisco MWR 2941 Mobile Wireless
Routers
Device OS
IOS 15.1(1)T3
Device OS
Device OS
IOS 12.2(33)MRB4
IOS 15.1(1)MR
IOS 15.0(2)MR
IOS 12.4(20)MRA
IOS 12.2(33)MRB
CSR 3.4.2 aka IOS
15.1(1)MR2
CSR3.4.1 aka IOS
15.1(1)MR1
IOS 15.1(2)S2
IOS 15.0(1)MR1
IOS 12.2(33)MRB6
CSR3.4.1 aka IOS
15.1(1)MR1
CSR3.4.2 aka IOS
15.1(1)MR2
IOS 12.2(33)MRB5
IOS 15.1(1)MR3
IOS 15.1(1)MR04
IOS 12.2(25)EY
IOS 12.2(25)EY3
IOS 12.2(25)SEB4
IOS 12.2(25)SEG1
IOS 12.2(35)SE
IOS 12.2(37)SE
IOS 12.2(37)SE1
IOS 12.2(40)SE
IOS 12.2(44)SE1
IOS 12.2(46)SE
IOS 12.2(50)SE
IOS 12.2(52)SE
IOS 12.2(53)SE
IOS 12.2(54)SE
IOS 12.2(55)SE
IOS 12.2(58)SE
IOS 12.2(58)SE1
IOS 12.2(52)SE
IOS 12.2(53)SE
IOS 12.3(22)S
IOS 12.3(23)
IOS 12.3(23)S1
IOS 12.3(23)S2
IOS 12.3(23)S3
IOS 12.2(54)SE
IOS 12.2(55)SE
IOS 12.2(58)SE
IOS 12.2(58)SE1
IOS 12.2(58)SE2
IOS 12.2(58)EX
IOS 12.0(0.20)T
IOS 12.0(3)T3
IOS 12.0(4)T
IOS 12.0(5)
IOS 12.0(5)T1
IOS 12.0(6.5)T3
IOS 12.0(7)XK1
Provided in:
Provided in:
4.1 (legacy)
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
63
IP Command
Device Series
IP Command
Device Series
IP Command
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Device Series
Cisco ME 3800X Carrier Ethernet
Switch Routers
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco ME 1200 Carrier Ethernet
Switch Switches
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco 7600 Series Routers
Cisco Catalyst 6500 Series (IOS)
Switches
Device OS
IOS 12.1(20)
IOS 12.2(12)
IOS 12.2(4)T1
Device OS
IOS 12.2(8)T5
IOS 12.2(27)
Device OS
IOS 12.3(14)T
IOS 12.3(14)T7
IOS 12.4(11)T
IOS 12.4(22)T
IOS 12.4(24)T
IOS 15.0M
IOS 15.1(1)T
IOS 15.1(2)T
IOS 15.1(3)T
IOS 15.4(2)SN
IOS 12.1
IOS 12.1(13)E6
IOS 12.1(20)E3
IOS 12.2
IOS 12.2(17d)SXB
IOS 12.2(18)SXD2
IOS 12.2(18)SXD5
IOS 12.2(18)SXE
IOS 12.2(18)SXF
IOS 12.2(18)SXF7
IOS 12.2(33)
IOS 12.2(33)SRA
IOS 12.2(33)SRA6
IOS 12.2(33)SRD1
IOS 12.2(33)SRD2
IOS 12.2(33)SRD3Q
IOS 12.2(33)SRE
IOS 12.2(33)SRE 1
IOS 12.2(33)SXH
IOS 12.2(33)SXH1
IOS 12.2(33)SXH2
IOS 12.2(33)SXH2a
IOS 12.2(33)SXI
starts with 12.2(SIERRA)
IOS 12.2(33)SXI5
IOS 12.2(33)SXI2a
IOS 12.2(33)SXH8
IOS 12.2(18)SXF17a
IOS 12.2(50)SY
IOS 12.2(33)SRE5
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
Provided in:
Provided in:
Provided in:
4.1 (legacy)
PN 4.1 DP
1405
4.1 (legacy)
4.1 (legacy)
64
IP Command
Device Series
Link-OAM:
IP Command
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
IP Command
Link-OAM:
Assign template on interface
Configure multipoint to multipoint or point to point EVC
Enable/Disable OAM on interface
Enable E-LMI on interface
Configure OAM parameter on interface
Start/Stop Remote Loopback
Cisco ASR 903 Series Routers
Device Series
Device Series
Cisco ASR 9000 Series Routers
Device OS
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
XE 3.7
Device OS
XE 3.8
Provided in:
4.1 (legacy)
IP Command
Device OS
IOS XR 3.7.3
IOS XR 3.9.0
IOS XR 3.9.1
IOS XR 3.9.2
IOS XR 4.0.0
IOS XR 4.0.1
IOS XR 4.0.3
IOS XR 4.0.4
IOS XR 4.1.0
IOS XR 4.1.1
IOS XR 4.1.2
IOS XR 4.2.0
IOS XR 4.2.1
IOS XR 4.2.2
IOS XR 4.2.3
Provided in:
4.1 (legacy)
MPLS and MPLS-TP Commands
MPLS/MPLS-TP Command
Linear Protection:
Configure Linear Protection
Manual Switch
Clear Manual Switch
Configure Linear Protection at tunnel
VLANs:
Create/modify/delete VLANs
Device Series
Cisco ASR 903 Series Routers
Device OS
IOS 15.3(2)S
IOS 15.3(3)S
Provided in:
4.1 (New!)
Cisco Unified Computing System
(UCS)
NX-OS 4.2(1)N1(1.1j)
4.1 (legacy)
VLANs:
Create/modify/delete VLANs
Cisco ASR 5000 Series Mobile
Gateway
Star OS 12.2
4.1 (legacy)
MPLS:
Configure MPLS Discovery
Configure MPLS Label Range
Enable MPLS on Interface
Disable MPLS on Interface
MPLS:
Configure MPLS Discovery
Configure MPLS Label Range
Enable MPLS on Interface
Disable MPLS on Interface
MPLS:
Configure MPLS Discovery
Configure MPLS Label Range
Enable MPLS on Interface
Disable MPLS on Interface
LSP:
Cisco ASR 901 Series Routers
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
ONS 9.30
4.1 (legacy)
Cisco ASR 903 Series Routers
Cisco ASR 9000 Series Routers
Cisco Carrier Packet Transport (CPT
4.1 (legacy)
4.1 (legacy)
65
MPLS/MPLS-TP Command
Tunnel Ping
Tunnel Trace
LSP path Lockout
Device Series
200/600) system
LSP:
Cisco Carrier Packet Transport (CPT
LSP Ping
LSP Trace
LSP Lockout
LSP path No Lockout
Add/Update/Remove Global Configuration
Add Link Configuration Remove Link Configuration
200/600) system
Device OS
ONS 9.50
ONS 9.51
ONS 9.511-514
ONS 9.52
ONS 9.522
ONS 9.30
ONS 9.50
ONS 9.51
ONS 9.511-514
ONS 9.52
ONS 9.522
ONS 9.7
Provided in:
4.1 (legacy)
PN 4.1 DP
1405
Provided in:
PN 4.1 DP
1405
MPLS/MPLS-TP Command
LSP:
LSP Ping
LSP Trace
LSP Lockout
LSP path No Lockout
Add/Update/Remove Global Configuration
Add Link Configuration Remove Link Configuration
LSP:
Tunnel Ping
Tunnel Trace
LSP path Lockout
Device Series
Cisco Carrier Packet Transport (CPT
50) system
Device OS
IOS 15.2(2)SC.7
Cisco 7600 Series Routers
4.1 (legacy)
LSP:
LSP Ping
LSP Trace
LSP Lockout
LSP path No Lockout
Add/Update/Remove Global Configuration
Add Link Configuration Remove Link Configuration
Cisco 7600 Series Routers
LSP:
LSP Ping
LSP Trace
LSP Lockout
LSP path No Lockout
Add/Update/Remove Global Configuration
Add Link Configuration Remove Link Configuration
LSP:
LSP Ping
LSP Trace
LSP Lockout
LSP path No Lockout
Add/Update/Remove Global Configuration
Add Link Configuration Remove Link Configuration
Cisco ASR 903 Series Routers
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
XE 3.7
XE3.8
IOS XR 3.7.3
IOS XR 3.9.0
IOS XR 3.9.1
IOS XR 3.9.2
IOS XR 4.0.0
IOS XR 4.0.1
IOS XR 4.0.3
IOS XR 4.0.4
IOS XR 4.1.0
4.1 (legacy)
Cisco ASR 9000 Series Routers
4.1 (legacy)
4.1 (legacy)
66
MPLS/MPLS-TP Command
Device Series
MPLS/MPLS-TP Command
Device Series
BFD:
Add/Remove BFD Template Configuration
Show BFD Template
Show BFD Template at Tunnel
Add/Remove Label Range Configuration
Cisco 7600 Series Routers
Note: Add Label Range
Configuration and Remove
Label Range Configuration are
supported on Cisco IOS
MPLS/MPLS-TP Command
BFD:
Add/Remove BFD Template Configuration
Show BFD Template
Show BFD Template at Tunnel
Add/Remove Label Range Configuration
BFD:
Configure BFD
Device Series
Cisco ASR 903 Series Routers
BFD:
BFD Global Configuration
Cisco ASR 9000 Series Routers
Bundle Ethernet:
Configure Bundle Ethernet
Cisco ASR 901 Series Routers
Bundle Ethernet:
Configure Bundle Ethernet
Cisco ASR 903 Series Routers
Bundle Ethernet:
Configure Bundle Ethernet
Cisco ASR 9000 Series Routers
Cisco ASR 5000 Series Mobile
Gateway
Star OS
Device OS
IOS XR 4.1.1
IOS XR 4.1.2
IOS XR 4.2.0
IOS XR 4.2.1
Device OS
IOS XR 4.2.2
IOS XR 4.2.3
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
Device OS
XE 3.7
XE 3.8
Provided in:
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
IOS XR 3.7.3
IOS XR 3.9.0
IOS XR 3.9.1
IOS XR 3.9.2
IOS XR 4.0.0
IOS XR 4.0.1
IOS XR 4.0.3
IOS XR 4.0.4
IOS XR 4.1.0
IOS XR 4.1.1
IOS XR 4.1.2
IOS XR 4.2.0
IOS XR 4.2.1
IOS XR 4.2.2
IOS XR 4.2.3
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
Provided in:
4.1 (legacy)
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
67
Session Border Control Commands
SBC Command
SBC:
Add/Update/Delete SIP Adjacency
Add SIP Adjacency Outbound AuthRealm
Update SIP Adjacency Outbound AuthRealm
Delete SIP Adjacency Outbound AuthRealm
Add/Update/Delete SIP Header Profile
Add/Update SIP Header Profile Header
Add/Update/Delete SIP Header Profile Entry
Add SIP Header Profile Condition
Add/Update/Delete SIP option Profile
Add/Delete SIP Parameter Profile
Add SIP Parameter Profile Parameter
Update SIP Parameter Profile Parameter
Delete SIP Parameter Profile Parameter
Add/Delete Blacklist
Add/Update/Delete Blacklist Reason
Add/Update/Delete CAC Policy Set
Add/Update/Delete CAC Policy Table
Add/Update/Delete CAC Rule Entry
Add/Update/Delete Call Policy Set
Add/Update/Delete Call Policy Table
Add/Update/Delete Call Rule Entry
Add/Delete Codec List
Add/Update/Delete Codec List Entry
Add/Delete Media Address
Add Media Address Dbe
Add/Update/Delete QoS Profile
Viewing SBC Statistics
Current 15 Min Statistics
Current 5 Min Statistics
Current Day Statistics
Current Hour Statistics
H.248 Statistics
Previous 15 Min Statistics
Previous 5 Min Statistics
Previous Day Statistics
Previous Hour Statistics
Device Series
Cisco 7600 Series Routers
Device OS
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
Provided in:
4.1 (legacy)
Device Series
CRS Series Routers
Device OS
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
IOS 4.3.1
Provided in:
4.1 (legacy)
SONET/SDH Commands
SONET/SDH Command
BER:
Show BER Threshold
PN 4.1 DP
1405
68
SONET/SDH Command
BER:
Show BER Threshold
Device Series
Cisco 7600 Series Routers
BER:
Show BER Threshold
Cisco IOS 12000 Series GSR
Clock:
Show Controller data
Show TCA Threshold
Show Line Counters
Show Medium Counters
Show Path Counters
Show Section Counters
Show Trace Details
Clear SONET SDH Counters
Clock:
Configure clock source
Cisco IOS and Cisco IOS XR devices
Note: Remove rate limit is not
supported on Cisco IOS XR software
CRS Series Routers
Device OS
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
IOX 4.1.0
IOX 4.1.1
IOX4.2.0
IOX4.2.1
IOX4.2.3
IOX 4.2.4
IOX 4.3.0
IOX 4.3.1
IOX 4.1.2
All device OSs supported
by Prime Network
Provided in:
4.1 (legacy)
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
IOS 4.3.2
4.1 (legacy)
Device OS
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
PN 4.1 DP
1405
TDM (Time Division Multiplexing) Commands
TDM Command
TDM:
Configure Card Type
Modify E1 Controller
Modify T1 Controller
Device Series
Cisco ASR 901 Series Routers
TDM:
Configure Card Type
Modify E1 Controller
Modify T1 Controller
Cisco ASR 903 Routers
TDM:
Configure Card Type
Modify E1 Controller
Modify T1 Controller
Cisco ASR 9000 Series Routers
4.1 (legacy)
4.1 (legacy)
69
Channelization Commands
Channelization Command
(For SONT/SDH):
Configure Framing
Configure AUG Mapping
Configure AU4
Delete AU4
Configure TUG3
Delete TUG3
Configure STS
Delete STS
(For SONT/SDH):
Configure Controller
Device Series
Cisco ASR 903 Series Routers
Device OS
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
Provided in:
4.1 (legacy)
Cisco ASR 903 Series Routers
4.1 (legacy)
(For SONT/SDH):
Configure AU3
Delete AU3
(For SONT/SDH):
Modify Controller
Cisco ASR 9000 Series Routers
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
Cisco ASR 9000 Series Routers
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
IPoDWDM Command
IPoDWDM:
Configure Laser State
Show IM trace details
Configure Transmit data
Configure Rx LOS threshold
IPoDWDM:
Show controller Data
Show Device Log
Show PM History data
Show RTPM counters
Show RTPM threshold
Configure G.709 ODU
Configure G.709 OTU
Configure G.709 TTI
Device Series
Cisco IOS and Cisco IOS XR devices
Device OS
All device OSs supported
by Prime Network
Provided in:
4.1 (legacy)
CRS Series Routers
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
IOX 4.3.1
4.1 (legacy)
IPoDWDM:
Show Wavelength Map
Clear counters
Configure Channel
Configure FEC Mode
CRS Series Routers
4.1 (legacy)
IPoDWDM (IP over DWDM) Commands
IPoDWDM:
Configure PM FEC data
Configure PM Optics data
Configure PM OTN data
IPoDWDM Command
CRS Series Routers
Device Series
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
IOX 4.3.1
IOX 3.6.0-3
IOX 3.7.0-1
IOX 3.8.0-4
IOX 3.9.0-2
IOX 4.0.0-4
IOX 4.1.0-2
IOX 4.2.0-4
IOX 4.3.0-1
Device OS
PN 4.1 DP
1405
4.1 (legacy)
PN 4.1 DP
1405
4.1 (legacy)
Provided in:
70
IOX 4.3.1
IPoDWDM:
Configure G.709 Wrapper
Configure Loopback
Cisco 7600 Series Routers
IPoDWDM:
Show Wavelength Map
Clear counters
Configure Channel
Configure FEC Mode
Cisco IOS 12000 Series Gigabit
Switch Router (GSR)
IOS 12.2(33)SRE5
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
IOS 15.2(4)S
IOS 15.1(3)S4
IOX 4.1.0
IOX 4.1.1
IOX4.2.0
IOX4.2.1
IOX4.2.3
IOX 4.2.4
IOX 4.3.0
IOX 4.3.1
IOX 4.1.2
PN 4.1 DP
1405
4.1 (legacy)
4.1 (legacy)
MToP (Mobile Transport over Packet) Commands
MToP Command
Clock:
Create SyncE Global
Modify SyncE Global
Create SyncE Interface
Modify SyncE Interface
Clock:
Create PTP Clock Port
Modify PTP Clock Port
Delete PTP Clock Port
Device Series
Cisco ASR 901 Series Routers
Clock:
Create PTP Clock Global
Modify PTP Clock Global
Create PTP Interface
Cisco ASR 901 Series Routers
Clock:
Configure ESMC Global
Configure ESMC Interface
Cisco ASR 901 Series Routers
Clock:
Create SyncE Global
Modify SyncE Global
Create SyncE Interface
Modify SyncE Interface
Clock:
Create PTP Clock Port
Modify PTP Clock Port
Delete PTP Clock Port
Cisco ASR 903 Series Routers
Clock:
Create PTP Clock Global
Modify PTP Clock Global
Create PTP Interface
MToP Command
Cisco ASR 903 Series Routers
Cisco ASR 901 Series Routers
Cisco ASR 903 Series Routers
Device Series
Device OS
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
(15.3(1)S/15.3(2)S/(15.3(2)S2/XE
3.9.2)/XE3.10)
Provided in:
4.1 (legacy)
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
Device OS
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
Provided in:
71
MToP Command
Clock:
Configure ESMC Global
Configure ESMC Interface
Device Series
Cisco ASR 903 Series Routers
Clock:
Modify ESMC Global
Disable ESMC Interface
Cisco ASR 903 Series Routers
Clock:
Create SyncE Global
Modify SyncE Global
Create SyncE Interface
Modify SyncE Interface
Clock:
Create PTP Clock Global
Modify PTP Clock Global
Create PTP Interface
Clock:
Modify ESMC Global
Disable ESMC Interface
APS:
Create APS
Modify APS
Cisco ASR 9000 Series
Routers
XE3.10
Device OS
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
Cisco ASR 9000 Series
Routers
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
Cisco ASR 9000 Series
Routers
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
Cisco ASR 903 Series Routers
4.1 (legacy)
APS:
Create APS
Modify APS
Cisco ASR 9000 Series
Routers
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
Device Series
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Device OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Provided in:
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Device Series
Device OS
Provided in:
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
Mobility Commands
Mobility Command
PDN Gateway (P-GW):
Create P-GW PLMN
Delete P-GW
Modify P-GW
Create P-GW
Serving Gateway (S-GW):
Create SAE GW
Modify SAE GW
Delete SAE GW
Show SAE GW
Create S-GW PLMN
Delete S-GW
Modify S-GW
Create S-GW
Create Policy Accounting
Modify Policy Accounting
Delete Policy Accounting
MAG:
Create MAG
Modify MAG
Delete MAG
Show MAG
Create QCI-QOS Mapping
Create Profile ID QCI Mapping
Mobility Command
72
Delete Profile ID QCI Mapping
Create Profile
Modify Profile
Delete Profile
Mobility Command
Foreign Agent/Home Agent:
Create FA
Modify FA
Delete FA
Show FA
Create SPI
Modify SPI
Delete SPI
Show HA Service
Create HA Service
Delete HA Service
Modify HA Service
Show HA SPI List
Create HA SPI List
Delete HA SPI List
Modify HA SPI List
Create IKE
Modify IKE
Delete IKE
Modify Advertisement
Modify Authentication
Modify GRE
Modify HA Configuration
ePDG:
Create ePDG Service
Modify ePDG Service
Delete ePDG Service
Show ePDG Service
VRF:
Modify
Delete VRF
Create VRF
GGSN:
Create PLMN Identifier
Create SGSN
Delete SGSN
Modify SGSN
Create GGSN
Create Network Requested PDP Context
Delete Network Requested PDP Context
GTPU:
Create GTPU Bind IP Address
Modify GTPU Bind IP Address
Delete GTPU Bind IP Address
Delete GTPU
Create GTPU
APN:
Show APN
Create Qos to DSCP Mapping
Create Virtual APN
Delete APN
Modify APN
Create APN
GTPP:
Device Series
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Device OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Provided in:
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Star OS 12.2
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
4.1 (legacy)
73
Mobility Command
Create CGF
Create Storage Server
Modify Storage Server
Delete Storage Server
Delete CGF
Delete GTPP
Modify CGF
Modify GTPP
Show CGF
Create GTPP
Mobility Command
EGTP:
Show EGTP
Modify EGTP
Delete EGTP
Create EGTP
Active Charging Service (ACS):
Create Group of Ruledefs
Create Rulebase
Create Ruledef
Delete Active Charging Service
Modify Active Charging Service
Create Access Ruledef
Delete Access Ruledef
Show Access Ruledef
Create Host Pool
Delete Host Pool
Create Charging Action
Delete Charging Action
Show Charging Action
Create Active Charging Service
Context:
Create Context
Delete Context
Device Series
Mobile Gateway
Star OS
Device OS
Star OS 14.0
Star OS 14.1
Star OS 15.0
Provided in:
Device Series
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Device OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Provided in:
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
4.1 (legacy)
License:
Show License
Modify License
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Proxy DNS:
Create Proxy DNS
Delete Proxy DNS
Modify Proxy DNS
Route Access List:
Show Route Access List
Create Route Access List
Delete Route Access List
Modify Route Access List
Route Map:
Show Route Map
Create Route Map
Delete Route Map
Modify Route Map
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
4.1 (legacy)
Cisco ASR 5000 Series
Mobile Gateway
Star OS
Cisco ASR 5000 Series
Mobile Gateway
Star OS
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
74
PWHE (Pseudowire Headend) Commands
PWHE Command
PWHE:
Modify PWHE Crossconnect P2P
Delete PWHE Crossconnect P2P
Delete PWHE Crossconnect Group
Show PWHE Crossconnect Group
Create PWHE Crossconnect MP2MP
Modify PWHE Crossconnect MP2MP
Delete PWHE Crossconnect MP2MP
Show PWHE Neighbor Crossconnect Group
PWHE Command
PWHE:
Create PWHE Interface
Modify PWHE Interface
Delete PWHE Interface
Show PWHE Interface
Create PWHE Generic Interface List
Show PWHE Generic Interface List
Modify PWHE Generic Interface List
Delete PWHE Generic Interface List
Show PWHE Generic Interface List
Device Series
Cisco ASR 9000 Series
Routers
Device OS
IOS XR 4.2.3
IOS XR 4.3.0
Provided in:
4.1 (legacy
Device Series
Cisco ASR 9000 Series
Routers
Device OS
IOS XR 4.3.0
Provided in:
4.1 (legacy)
Device Series
Cisco ASR 9000 Series
Routers
Device OS
IOS XR 4.3.0
Provided in:
4.1 (legacy)
Cisco ASR 9000 Series
Routers
IOS XR 4.2.3
IOS XR 4.3.0
4.1 (legacy)
Device Series
Cisco ASR 901 Series Routers
Device OS
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
Provided in:
4.1 (legacy)
Cisco ASR 903 Series Routers
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
4.1 (legacy)
MCLAG (Multi-Chassis Link Aggregation Group) Commands
MCLAG Command
MCLAG:
Create Backbone Interface
Delete Backbone Interface
MCLAG:
Create ICCP Group
Modify ICCP Group
Delete ICCP Group
Configure MCLAG
E1 Multilink Commands
E1 Multilink Command
E1 Multilink:
Create Multilink Interface
Modify Multilink Interface
Configure Member Multilink
Delete Multilink Interface
Show Multilink Interface
E1 Multilink:
Create Multilink Interface
Modify Multilink Interface
Configure Member Multilink
Delete Multilink Interface
Show Multilink Interface
75
RSVP (Resource Reservation Protocol) Commands
RSVP Command
RSVP:
Configure RSVP
Enable RSVP on Interface
Disable RSVP on Interface
Device Series
Cisco ASR 901 Series Routers
RSVP:
Configure RSVP
Enable RSVP on Interface
Disable RSVP on Interface
Cisco ASR 903 Series Routers
RSVP:
Configure RSVP
Enable RSVP on Interface
Disable RSVP on Interface
Cisco ASR 9000 Series
Routers
Device OS
IOS 15.3(1)S
IOS 15.2(2r)SNH1
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS 15.3(1)S
IOS 15.3(2)S
IOS 15.3(2)S2
XE 3.9.2
XE3.10
IOS XR 4.2.3
IOS XR 4.3.0
Provided in:
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
76
Cable Commands
Cable Command
Ports:
Modify cable port
Ports:
Configure Downstream Port
Create Upstream Port
Modify Upstream Port
RF Profile:
Create RF Profile
Modify RF Profile
Delete RF Profile
Show RF Profile
Frequency Profile:
Delete Frequency Profile
Create Lane
Create Block
DEPI Tunnel:
Create DEPI Tunnel
Modify DEPI Tunnel
Delete DEPI Tunnel
DEPI Tunnel
DEPI Session
Cable DEPI Session
QAM:
Modify QAM Channel
QAM Channel
L2TP Class:
Create L2tp Class
Modify L2tp Class
Delete L2tp class
Device Series
Cisco uBR 10000
Device OS
IOS 12.2(33)SCG(ED
IOS 12.3(23)BC(ED)
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
Provided in:
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQSh
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQ,
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco uBR 10000
4.1 (legacy)
Basic Device Settings Commands
Basic Device Settings Command
SNMP:
Add SNMP Configuration
Remove SNMP Configuration
Update SNMP Configuration
SNMP:
Add Traps
Enable Traps
Remove Traps
SNMP:
Modify SNMP Manager Configuration
Show SNMP Manager Configuration
SNMP:
Add Snmp Configuration
Remove Snmp Configuration
Enable traps
Add Traps
Remove Traps
SNMP:
Add Snmp Configuration
Device Series
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Cisco ME 4600 Series OLT
Device OS
All device OSs supported
by Prime Network
Provided in:
4.1 (legacy)
All device OSs supported
by Prime Network
4.1 (legacy)
v3.1.0-s3.r114
4.1 (New!)
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco uBR 10000
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
4.1 (legacy)
Basic Device Settings Command
Remove Snmp Configuration
Enable traps
Add Traps
Remove Traps
Basic Device Settings Command
Device Series
Device OS
Provided in:
Device Series
Provided in:
Memory and Device Config Files:
Write Memory
Running Config
Running Config from File
Startup Config
Memory and Device Config Files:
Write memory
Show Running Config
Show Startup Config
Memory and Device Config Files:
Write memory
Show Running Config
Show Startup Config
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Device OS
All device OSs
supported
by Prime Network
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco uBR 10000
IOS 12.2(33)SCG(ED) 4.1 (legacy)
IOS 12.3(23)BC(ED)
Copy:
From FTP
To FTP
From TFTP
To TFTP
Copy:
From FTP
To FTP
From TFTP
To TFTP
Copy:
From FTP
To FTP
From TFTP
To TFTP
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Ping:
Ping Destination From Device
Ping VRFs
Ping:
Ping Destination From Device
Ping:
Ping Destination From Device
Cisco IOS and Cisco IOS XR devices
Trace Route:
Trace Route from device
Trace Route:
Trace Route From Device
Trace Route:
Trace Route From Device
Cisco IOS and Cisco IOS XR devices
Telnet Sessions:
Show Users (Telnet sessions)
Telnet Sessions:
Show Users (Telnet sessions)
Telnet Sessions:
Show Users (Telnet sessions)
Cisco IOS and Cisco IOS XR devices
Ports:
Cisco IOS and Cisco IOS XR devices
All device OSs
supported
by Prime Network
4.1 (legacy)
4.1 (legacy)
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
Cisco uBR 10000
IOS 12.2(33)SCG(ED) 4.1 (legacy)
IOS 12.3(23)BC(ED)
Cisco RF Gateway 10
Cisco uBR 10000
Cisco RF Gateway 10
Cisco uBR 10000
Cisco RF Gateway 10
Cisco uBR 10000
All device OSs
supported
by Prime Network
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
All device OSs
supported
by Prime Network
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
All device OSs
supported
by Prime Network
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
All device OSs
supported
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
Basic Device Settings Command
Add port description
Remove port description
Update port description
Change port status
Assign to port Vlan
Deassign port to Vlan
Ports:
Modify Port
IP Interfaces:
Create IP Interface
Modify IP Interface
Delete IP Interface
IP Interfaces:
Modify IP Interfaces
Show IP Interfaces
Basic Device Settings Command
IP Interfaces:
Create IP Interface
Modify IP Interface
Delete IP Interface
IP Routes:
IP Route
VRF IP route
Device Series
Device OS
by Prime Network
Provided in:
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
Device Series
Cisco uBR 10000
Device OS
Provided in:
IOS 12.2(33)SCG(ED) 4.1 (legacy)
IOS 12.3(23)BC(ED)
Cisco CPT 200/600 Device
4.1 (legacy)
IP Routes:
Create IP Route
Delete IP Route
Show IP Route
Cisco ME 4600 Series OLT
ONS 9.30
ONS 9.50
ONS 9.51
ONS 9.511-514
ONS 9.52
ONS 9.522
v3.1.0-s3.r114
Interfaces:
Modify InBand Interfaces
Show InBand Interfaces
Interfaces:
Create Interface
Modify Interface
Delete Interface
Interfaces:
Add Interface Configuration
Update Interface Configuration
Remove Interface Configuration
Enable Interface
Disable Interface
Add Loopback Interface
Remove rate limit
IP Addresses:
Configure Secondary IP Address
Delete Secondary IP Address
Cisco ME 4600 Series OLT
v3.1.0-s3.r114
4.1 (New!)
Cisco ASR 5000 Series Mobile
Gateway
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
4.1 (legacy)
4.1 (legacy)
ACLs:
Create Access list
Modify Access List
Delete Access List
Show Access List
Remove Access List
Remove Access List Entry
Cisco ASR 5500
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Star OS 12.2
Star OS 14.0
Star OS 14.1
Star OS 15.0
Cisco RF Gateway 10
Cisco ASR 5000 Series Mobile
Gateway
Cisco ASR 5000 Series Mobile
Gateway
4.1 (legacy)
4.1 (New!)
4.1 (legacy)
4.1 (legacy)
ACLs:
Basic Device Settings Command
Create Access list
Modify Access List
Delete Access List
Show Access List
Remove Access List
Remove Access List Entry
Cisco 7600 Series Routers
Device Series
Basic Device Settings Command
Device Series
AAA:
Create Diameter Accounting Server
Cisco Nexus 1000V Network
Element
Create Diameter Authentication Server
Delete/Modify AAA Group
Basic Device Settings Command
Device Series
Server Device Configuration
Add Host Name
Remove Host name
Add DNS server
Remove DNS server
Add NTP server
Remove NTP server
Add Radius server
Remove Radius server
Add Tacacs server
Add Tacacs+ server
Remove Tacacs server
Remove Tacacs+ server
Server Device Configuration:
Add Host Name
Remove Host Name
Add DNS Server
Remove DNS Server
Add NTP Server
Remove NTP Server
Add Radius Server
Remove Radius Server
Add Tacacs Server
Remove Tacacs Server
Add Tacacs+ Server
Remove Tacacs+ Server
Server Device Configuration
Add Host Name
Remove Host Name
Add DNS Server
Remove DNS Server
Add NTP Server
Remove NTP Server
Add Radius Server
Remove Radius Server
Add Tacacs Server
Remove Tacacs Server
Add Tacacs+ Server
Remove Tacacs+ Server
IOS 12.2(33)SRE5
Device OS
IOS 15.1(3)S2
IOS 15.0(1)S5
IOS 12.2(33)SRE6
IOS 12.2(33)SRD8
IOS 15.1(3)S3
IOS 15.2(1)S1
IOS 15.2(2)S
IOS 15.0(1)S6
Device OS
IOS 15.2(4)S
IOS 15.1(3)S4
NX-OS
4.2(1)SV1(5.1)
NX-OS 4.2(1)SV1(4a)
NX-OS
4.2(1)SV1(5.1a)
4.1 (legacy)
Provided in:
Device OS
All device OSs
supported
by Prime Network
Provided in:
Cisco RF Gateway 10
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
4.1 (legacy)
Cisco uBR 10000
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
4.1 (legacy)
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Provided in:
4.1 (legacy)
4.1 (legacy)
Basic Device Settings Command
Device Series
Syslog Host:
Syslog Host Logging
Cisco IOS and Cisco IOS XR devices
Note: Not supported on Cisco
Carrier Packet Transport (CPT
200/600) system
Cisco RF Gateway 10
Syslog Host:
Syslog Host Logging
Syslog Host:
Syslog Host Logging
Cisco uBR 10000
Appendix A – IOS-XE to IOS Software
Mapping
The following table maps the Cisco IOS XE software versions to
the Cisco IOS software versions.
Cisco IOS XE Version
Cisco IOS version
3.1.0S
15.0(1)S
3.1.1S
15.0(1)S1
3.1.2S
15.0(1)S2
3.1.3S
15.0(1)S3
3.1.4S
15.0(1)S4
3.1.4aS
15.0(1)S4a
3.1.5S
15.0(1)S5
3.1.6S
15.0(1)S6
3.2.0S
15.1(1)S
3.2.1S
15.1(1)S1
3.2.2S
15.1(1)S2
3.3.0S
15.1(2)S
3.3.1S
15.1(2)S1
3.3.2S
15.1(2)S2
3.4.0S
15.1(3)S
3.4.0aS
15.1(3)S0a
3.4.1S
15.1(3)S1
3.4.2S
15.1(3)S2
3.4.3S
15.1(3)S3
3.4.4S
15.1(3)S4
3.4.5S
15.1(3)S5
Device OS
All device OSs
supported
by Prime Network
Provided in:
IOS 12.2(50)SQ
IOS-XE 3.2.1SQ
IOS 12.2(33)SCG(ED)
IOS 12.3(23)BC(ED)
4.1 (legacy)
4.1 (legacy)
4.1 (legacy)
3.4.6S
15.1(3)S6
3.5.0S
15.2(1)S
3.5.1S
15.2(1)S1
3.5.2S
15.2(1)S2
3.6.0S
15.2(2)S
3.6.1S
15.2(2)S1
3.6.2S
15.2(2)S1
3.7.0S
15.2(4)S
3.7.1S
15.2(4)S1
3.7.2S
15.2(4)S2
3.7.3S
15.2(4)S3
3.7.4S
15.2(4)S4
3.7.5S
15.2(4)S5
3.7.6S
15.2(4)S6
3.8.0S
15.3(1)S
3.8.1S
15.3(1)S1
3.8.2S
15.3(1)S2
3.9.0S
15.3(2)S
3.9.1S
15.3(2)S1
3.9.2S
15.3(2)S2
3.10.0S
15.3(3)S
3.10.1S
15.3(3)S1
3.10.2S
15.3(3)S2
3.10.3S
15.3(3)S3
3.10.4S
15.3(3)S4
3.10.5S
15.3(3)S5
3.10.6S
15.3(3)S6
3.10.7S
15.3(3)S7