HALO ® H AL O LED H4 Se r i es - 2nd G ener at i on The Halo H4 LED is a family of 4” aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 Series LED Light Engines and compatible 4” TL4 and TLS4 LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature. This is an insulated ceiling* AIR-TITETM housing offering 120 volt dimming capability. The H4 LED series offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings. Catalog # Type Project Comments Date Prepared by D ESIGN F EATURES MECHANICAL Slide-N-Side™ Junction Box • Positioned to accommodate straight conduit runs • Seven 1/2” trade size conduit knockouts with true pry-out slots • Slide-N-Side™ wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. • Accepts a wide range of non-metallic (type NM) sheathed Plaster Frame cables - the standard cable types • Galvanized steel die-formed used in lighting in both U.S. and construction. Canada. • The collar can be removed from - Allows wiring connections to be plaster frame to provide access to made outside the junction box the junction box. - Simply insert the cable directly • Collar adjusts for ceilings up to into the trap after connections 1-1/2” thick. are made. • Plaster frame features include: - Accommodates the following - Patented regressed locking screw standard non-metallic sheathed positioned for securing hanger cable sizes: bars from below the ceiling. (US) #14/2, #14/3, #12/2, #12/3 - Cutouts for easily crimping (Canada) #14/2, #14/3, #12/2 hanger bars in position. LED Light Engine Connection - AIR-TITE aperture gasket is • LED connector is a non-screw base pre-installed. connector offering easy installation - HALO identity embossed on with the H4 LED 2nd Generation plaster frame. EL406, ELG406, ELSG406 Series GOT NAIL! Pass -N-Thru™ LED Light Engines. Bar Hangers • LED connector meets high-efficacy • Pre-installed nail easily installs luminaire requirement for a in regular lumber, engineered non-screw base socket, and where lumber and laminated beams. required to qualify as a high- • Safety and guidance system efficacy luminaire. (California prevents snagging, ensures Title-24) smooth straight nail penetration and allows bar hangers to be easily LED Driver • LED dimmable driver mounts removed if necessary. to the housing. • Automatic leveling flange aligns the housing and lets you hold the • Driver is a120 Volt, high efficiency, electronic power supply providing housing in place with one hand low voltage power to EL Series while driving nails. LED Light Engines. • Housing can be positioned at any • Driver meets FCC EMI/RFI point within 24” joist span. Consumer Level limits for use in • Pass-N-Thru™ feature allows bar residential and commercial hangers to be shortened without installations. removing from plaster frame. • Driver features high power factor • Score lines allow “tooless” and low THD and has integral shortening for 12” joists. thermal protection in the event • Bar hangers may be repositioned of over temperature or internal 90°. failure. • Integral T-bar clip snaps onto • Driver is specifically designed T-bars - no additional clips for compatibility with EL406 required. LED Light Engines, and ELG406, ELSG406 Adjustable Gimbal Light Engine / Trims. • If dimming is not required the fixture can be operated from a standard wall switch. Housings • Enclosure of formed aluminum construction. • Openings are gasketed AIR-TITE. • Designed for insulated ceilings in direct contact with insulation.* (May also be installed in non-insulated ceilings.) www.cooperlighting.com Dimming • The HALO H4 LED luminaire is designed for dimming capability to 10% in normal operation with most 120V leading edge (LE) and trailing edge (TE) phase control dimmers. H4 LED may also dim to 5% using dimmers with low end trim adjustment. (Consult dimmer manufacturer for application/compatibility/ loading. Note, some dimmers require a neutral in the wallbox). Warranty Cooper Lighting provides a five year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims. Labels • UL/cUL Listed 1598 Luminaire • UL/cUL Listed for Damp Location • UL/cUL Listed for Wet Location, covered ceiling - with select trims • UL/cUL listed for Direct Contact with insulation and combustible material* Qualifications • Use with designated LED light engines and trims for ENERGY STAR® qualification.** • Can be used for State of California Title 24 high efficacy luminaire compliance** • Can be used for Washington State Energy Code (WSEC) and International Energy Conservaction Code (IECC) high efficacy luminaire compliance IC and AIR-TITE™ Certified under ASTM-E283 and listed UL/cUL 1598. May be used to meet insulated ceiling and restricted air-flow requirements such as: • Washington State Energy Code (WSEC) • International Energy Conservation Code (IECC) • New York State Energy Conservation Construction Code (NY-ECCC) • State of California Title 24 “Recessed Luminaires in Insulated Ceilings.” *Not for use with housings in direct contact with spray foam insulation. **Refer to ENERGY STAR Qualified Products List and CEC (T24) Appliance Database for listings. ® H457ICAT1E 4-Inch LED Recessed Housing New Construction Insulated Ceiling High Efficacy LED HousingDimmable FOR USE IN I N S U L AT E D C E I L I N G S F O R D I R E C T C O N TA C T W I T H I N S U L AT I O N * A L S O S U I TA B L E F O R N O N - I C A P P L I C AT I O N S H4 Series LED Energy Data: (Values at non-dimming line voltage.) Minimum Starting Temp: -30°C (-22°F) EMI/RFI: FCC Title 47 CFR, Part 18 (Consumer) Sound Rating: Class A standards Input Voltage: 120V Power Factor: >0.90 Input Frequency: 50/60Hz THD: <20% Input Power: 13W Input Current: 121mA Driver Compliance: UL6950, LPS rated Maximum IC (Insulated Ceiling) Ambient Continuous Operating Room Temperature: 25°C (77°F) Maximum Non-IC (Non-Insulated Ceiling) Ambient Continuous Operating Room Temperature: 40°C (104°F) ADV131740 December 16, 2013 10:36 AM HALO® H 4 5 7 I C AT 1 E DIMENSIONS 6 inch (152 mm) 5-3/8 inch (136 mm) outer dimension 4-1/4 inch (108 mm) 8-1/2 inch (216 mm) 1/2 inch (13 mm) O R D E R ING INFORMAT I O N - H4 LED Dow nl i ght s SAMPLE NUMBER: H457ICAT1E - EL406927 - TL410SC Complete unit includes LED housing, light engine and trim; ordered separately. H4 LED Housing H4 LED Light Engine EL406 H457 = 4˝ housing H4 LED series downlight, 2nd Generation ICAT = New Construction Insulated Ceiling, AIR-TITE 1E = LED driver, 120V, 50/60 Hz, dimmable, LE/TE* phase control dimmers (refer to dimmer manufacturer). CRI EL406 = 4" LED Downlight Engine, 2nd Generation 9 = 90 CRI CCT 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K Trim Options TL410SC =Specular Clear Reflector, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL410H =Haze Reflector, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL410WH = White Reflector, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL410SN =Satin Nickel Reflector, Diffuse Polymer Dome Lens, Satin Nickel Ring, Shower Rated TL410TBZ = Tuscan Bronze Reflector, Diffuse Polymer Dome Lens, Tuscan Bronze Ring, Shower Rated TL410SBK = Specular Black Reflector, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL411WB =White Baffle, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL411BB =Black Baffle, Diffuse Polymer Dome Lens, White Ring, Shower Rated TL402SCS =Specular Clear Reflector, Solite® Glass Lens, and White Ring, Shower Rated TL402HS =Haze Reflector, Solite® Glass Lens, and White Ring, Shower Rated TL402WHS =White Reflector, Solite® Glass Lens, and White Ring, Shower Rated TL402SNS =Satin Nickel Reflector, Solite® Glass Lens, and Satin Nickel Ring, Shower Rated Accessories TL402TBZS = Tuscan Bronze Reflector, Solite® Glass Lens, and Tuscan Bronze Ring, Shower Rated TL402SBKS =Specular Black Reflector, Solite® Glass Lens, and White Ring, Shower Rated TL403WBS =White Baffle, Solite® Glass Lens, and White Ring, Shower Rated TL403BBS =Black Baffle, Solite® Glass Lens, and White Ring, Shower Rated TLS408WHWB = Square Baffle Trim, Solite® Glass Lens, White Ring with White Baffle, Shower Rated TLS408WHBB = Square Baffle Trim, Solite® Glass Lens, White Ring with Black Baffle, Shower Rated TLS408SNBB = Square Baffle Trim, Solite® Glass Lens, Satin Nickel Ring with Black Baffle, Shower Rated TLS408TBZBB = Square Baffle Trim, Solite® Glass Lens, Tuscan Bronze Ring with Black Baffle, Shower Rated TL409WW = Wall Wash, Semi-Specular Clear Reflector with White Ring, Shower Rated TL409WHWW = Wall Wash, White Reflector with White Ring, Shower Rated TL422PS = Polymer “Dead Front” White Baffle & Regressed Lens, White Ring, Shower Rated Thin Profile Designer Trim Rings For use with Round TL4 trims (not compatible with Square TLS4 trims, or adjustable gimbals ELG, ELSG trims.) TRM400WH = White TRM400BK = Black TRM400SN = Satin Nickel TRM400TBZ = Tuscan Bronze TRM400PC = Polished Chrome * LE = Leading Edge (forward phase control) dimming * TE = Trailing Edge (reverse phase control) dimming O R D E R ING INFORMAT I O N - H4 LED Adj us t abl e G i mb a l s SAMPLE NUMBER: H457ICAT1E - ELG406930WH Complete unit includes LED housing, light engine and trim; ordered separately. H4 LED Light Engine CRI ELG406 = Round LED Adjustable Gimbal Light Engine - 2nd Generation ELSG406 = Square LED Adjustable Gimbal Light Engine - 2nd Generation 9 = 90 CRI CCT 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K Optional Accessory Reflector Kit Finish (order separately) WH = White SN = Satin Nickel TBZ = Tuscan Bronze TL412RK includes: • 25° reflector (one is included with gimbal) • 35° reflector • 50° reflector TL412RK is for use with ELGxx and ELSGxx gimbals only. Optional Len Media (order separately) One lens media may be used in place of clear lens. Optical Lenses • L110 Diffuse Sand Blasted Lens • L111 Soft Focus Textured Lens • L113 Prismatic Lens • L115 Linear Spread Lens Dichroic Color Films • L114 UV Filter • L120 Red • L121 Amber • L122 Yellow • L123 Green • L124 Daylight • L125 Blue • L127 Cosmetic Color Filters • L130 Yellow Solite® is a registered trademark of AGC Flat Glass North America www.cooperlighting.com Note: Specifications and Dimensions subject to change without notice. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801 Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049