ALL-PRO

advertisement
ALL-PRO
™
DESCRIPTION
Type
Catalog #
ALL-PRO ETS350 ProSeries MiniCan is a square 3” aperture Non-IC
AIR-TITE™ recessed housing and trim kit for use with 60 watt
PAR16-screw base reflector lamps. The Mini-Can ProSeries kits
include a baffle trim with a choice of White or Black baffle. MiniCan
is perfect for use in niche areas, soffits, case work and displays. The
unique housing design allows installation in new construction or in
remodel construction. The AIR-TITE design prevents airflow
between living areas and unconditioned areas, and the housing is
Non-IC rated for non-insulated ceilings. If ceiling insulation is
present it MUST be kept 3 inches away from all sides of the housing.
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ...H o u s i n g
• Square die-formed 20 gauge
CRS with gray powder coat
finish.
B ...P l a s t e r F r a m e
• Galvanized steel construction.
• Boat-shaped plaster frame
design with removable bar
hangers for installation in new
construction or in remodel
construction from below the
finished ceiling.
• ALL-PRO and ProSeries identity
printed on plaster frame.
C ...G a s k e t s
• Closed cell gaskets restrict
airflow, meeting air tight code
requirements without additional
caulking
D ...T r i m s
• Baffle trims in Gloss White or
Black with Gloss White trim
rings.
G ...T h e r m a l P r o t e c t o r
• Friction type springs hold baffle
trims securely in the housing.
E ...B a r
• Self Resetting thermal protector
protects against improper
lamping and direct contact with
insulation.
Hangers
• All-Nail™ preinstalled bar
hangers adjust up to 24” wide.
• All-Nail™ preinstalled nail
penetrates standard and
engineered lumber.
• Mini-levelling flange aligns bar
hangers on bottom of joist.
• Score lines allow bars to be
shortened for use in tight joist
spaces.
• Integral T-bar clip snaps onto Tbars - no additional clips
required.
H ...L a m p S o c k e t
• Ceramic E26 Medium Screw
base with nickel plated copper
alloy screw shell.
I ...L a m p
• 60W, 120V E26 base reflector
lamp (by others)
Labels
• UL/cUL Listed
• UL/cUL Listed for Damp
Location
• UL/cUL Listed for Feed Through
• IP labeled
• Certified under ASTM-E283
standard for air-tight
construction.
F ...J u n c t i o n B o x
• Four 1/2” trade size conduit
knockouts with true pry-out
slots.
• Rated for (4) #12 through
branch circuits.
• Three quick connect push type
wire connectors included.
ETS300
ETS300W
3” Square Recessed
Housing and Trim Kit
60W PAR16 Tungsten
Halogen Reflector Lamp
SQUARE TRIMS
FOR USE IN NONINSULATED CEILINGS
F
5-1/4"
[133mm]
A
B
5"
[127mm]
E
INSULATION MUST BE
KEPT 3” FROM
HOUSING
7/16"
[11mm]
C
3"
[76mm]
3-3/16"
[81mm]
4-1/8"
[104mm]
ORDERING INFORMATION
SAMPLE NUMBER: ETS300 Unit includes housing, plaster frame, hanger bars and trim
(lamp not included)
Housing
ETS300=3” Square Aperture Non-IC AIRTITE
Housing for 60W PAR16 Reflector Lamp
Black Baffle, Gloss White Trim Ring
ETS300W=3” Square Aperture Non-IC AIRTITE
Housing for 60W PAR16 Reflector Lamp
White Baffle, Gloss White Trim Ring
11/08
ADV082479
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
ALL-PRO
INSTALLATION
™
Installation - New Construction, Suspended Ceiling or Remodel
New Construction
For new construction, the plaster frame and bar hangers are installed first. Remove trim from housing. After the ceiling is installed,
the housing can be wired and then slid into the ceiling and secured with the plaster frame clips.
Suspended
Ceiling
After cutting a hole in the ceiling tile, the plaster frame and bar hangers are installed. The bar hangers have integral T-bar clips. Insert the housing into the ceiling
tile, secure in place with plaster frame clips and complete the wiring.
Remodel
After cutting a hole in the ceiling, Install plaster frame and secure in place with clips. Make wiring connections and insert housing into ceiling. Finally, secure
housing in place with plaster frame clips.
11/08
ADV082479
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
Download