BR-615-PLATE Mounting Kit
Flat Mounting Plate Kit for ELPRO 615M-1 Product
Specifications
Mounting Kit Contents (1 Bracket per Kit)
Bracket
1 Zinc Anodised Steel
Nuts/Washers
4 Mounting Screws
Size
138 x 108 x 1.4mm (5.5 x 4.25 x 0.06”)
Weight
106g (3.7oz)
General
Note: Specifications subject to change.
Ordering
To order, select product code from the table and specify country of application.
Description
Product Code
Description
The BR-615-PLATE provides a secure panel mounting option to the ELPRO
615M-1 Cellular Modem and Router. The panel securely mounts to the
module base using four screws. The cross shaped plate allows simple
installation to the main fixture with four additional screws.
BR-615-PLATE
Mounting Kit for ELPRO 615M-1 Cellular Modem and Router
Product Compatibility
Please refer to product datasheets for compatibility details to suit your application.
The BR-615-PLATE window provides space to view the ELPRO 615M-1 serial
number information. One kit is required per ELPRO 615M-1 product.
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product
data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
©2013 Cooper Bussmann
www.cooperbussmann.com/wireless
0313
BU-SB13103
Page 1 of 1
Datasheet: 7987