DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75
" (19mm) trim flange suitable for downlighting and accent applications. Utilizes FOUR (4) PAR38
Metal Halide lamps.
For remodel applications. Insulation must be kept 3 " (76mm) from all sides and at least 1 " (25mm) above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum, trim assembly is steel with powder coated finish. Fixture utilizes a removable trim sleeve to provide a 0.75" (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are mounted in a separate metal enclosure box attached to the junction box with 18" (457mm) of flexible conduit. Ballast enclosure includes a separated wiring compartment and two knockouts for conduit entry and features a perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and ballast enclosure) is removable from the housing for easy maintenance.
edge and lockable accessory ring that can accept one optical accessory.
Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.
F ... Mounting
A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws.
E ... Lamps
Four (4) PAR38 Metal Halide lamps mounted in adjustable double gimbal.
Lamp holder is individually removable and may be regressed 1" (25mm) for additional cut-off. 45° x 45° locking lamp adjustment. Lamp ring features beveled
G ... Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 7.94" x 27.84"
(202mm x 707mm)
Double
Gimbal
11.31"
287mm
29.55"
751mm
®
w/ 0.75" (19mm) Trim Flange
45º x 45º
Adjust
9.95"
253mm
1.70"
43mm
8.19"
208mm
9.45"
240mm
Required above ceiling
27.58"
701mm
28.25"
718mm
26.75"
680mm
16.44"
418mm
6.69"
170mm
Integral Electronic
Metal Halide Ballasts
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
Separate Wiring Compartment
For use with 70W or 100W PAR38 Metal Halide lamps.
ORDERING INFORMATION
9.25"
235mm
6.69"
170mm
18" (457mm) flexible conduit
Thermal
Protector
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
R www.cooperlighting.com
E T
Lamp Type / Wattage Label
070M38 = 70 Watt PAR38 Metal Halide
100M38 = 100 Watt PAR38 Metal Halide
Power Supply
Voltage
1 =
2 =
4 =
120V
277V
240V
Lamp Mechanism
G
R
=
=
Double Gimbal
Retractable Double Gimbal
Trim Finish
W = White
B
S
= Black
= Industrial Silver
Housing
R = Remodel
Power Supply
E = Electronic Metal Halide
Ballast
Trim Flange
T = 0.75" (19mm)
Trim Flange
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Housing Interior/Electrical Door/Sleeve
Finish
W =
B =
White
S =
Black
Industrial Silver rev 06/14/2013