DESCRIPTION
An adjustable Single-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes ONE (1) PAR38
Metal Halide lamp.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
One (1) PAR38 Metal Halide lamp
mounted in adjustable double gimbal.
Lamp holder is individually removable
and may be regressed 1" (25mm) for
additional cut-off. 45° x 45° locking lamp
adjustment. Lamp ring features beveled
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
edge and lockable accessory ring that
can accept one optical accessory.
Additional media holder* can be ordered
to allow fixture to accommodate up
to 2 accessories plus one snoot or
cross baffle. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
F.... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing with screws.
One (1) Light
PAR38 Metal Halide
Remodel Housing
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 7.80" x 7.80"
(198mm x 198mm)
11.31"
Double
Gimbal
287mm
9.95"
45º x 45º
Adjust
253mm
1.70"
43mm
8.19"
8.19"
9.45"
208mm
240mm
208mm
9.48"
Required
above
ceiling
191mm
241mm
4.10"
6.69"
170mm
104mm
Integral Electronic
Metal Halide Ballasts
7.51"
9.25"
235mm
6.69"
170mm
Separate Wiring
Compartment
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
18" (457mm) flexible conduit
Thermal
Protector
For use with 70W or 100W PAR38 Metal Halide lamps.
ORDERING INFORMATION
C1
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
R
E
Lamp Type / Wattage Label
070M38 = 70 Watt PAR38 Metal Halide
100M38 = 100 Watt PAR38 Metal Halide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 06/14/2013