DESCRIPTION
An adjustable Single-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes ONE (1) PAR30
Metal Halide lamp.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
that can accept one optical accessory.
Additional media holder* can be ordered
to allow fixture to accommodate up to
2 accessories plus one snoot or cross
baffle. Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes Med. base sockets.
E.... Lamps
One (1) PAR30 Metal Halide lamp
mounted in adjustable double gimbal.
Lamp holder is individually removable
and may be regressed 1" (25mm) for
additional cut-off. 45° x 45° locking lamp
adjustment. Lamp ring features beveled
edge and lockable accessory ring
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Double
Gimbal
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
F.... Mounting
Mounting clips are provided which mount
the housing edge flush with the finished
ceiling line. Mounting clips are secured to
the housing with screws.
One (1) Light
PAR30 Metal Halide
Remodel Housing
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 6.55" x 6.55"
(166mm x 166mm)
8.49"
10.31"
216mm
262mm
7.95"
45º x 45º
Adjust
202mm
1.70"
43mm
7.19"
7.45"
183mm
4.10"
104mm
Integral Electronic
Metal Halide Ballast
9.25"
235mm
*Media Holder:
White - LND-MH-W
Black - LND-MH-B
Silver - LND-MH-S
7.19"
189mm
183mm
Required
above
ceiling
166mm
6.52"
5.69"
145mm
5.69"
145mm
Separate Wiring
Compartment
18" (457mm) flexible conduit
Thermal
Protector
For use with 39W or 70W PAR30 Metal Halide lamps.
ORDERING INFORMATION
C1
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
R
E
Lamp Type / Wattage Label
039M30 = 39 Watt PAR30 Metal Halide
070M30 = 70 Watt PAR30 Metal Halide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/16/2013