DESCRIPTION An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange suitable for downlighting and accent applications. Utilizes THREE (3) PAR30 Metal Halide lamps. For new construction applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing. Catalog # Type Project Comments Date Prepared by SPECIFICATION FEATURES A.... Housing Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a 0.75" (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50" (13mm) to 1.25" (32mm) ceiling thickness. Optional Chicago Plenum configuration available. conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. D.... Electrical Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be configured for remote power. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. E.... Lamps Three (3) PAR30 Metal Halide lamps mounted in adjustable double gimbals. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cut-off. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture F.... Mounting Butterfly Brackets accept 1/2" (13mm) EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Three (3) Light PAR30 Metal Halide G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. New Construction Housing Ceiling Cut-Out: 6.49" x 17.87" (165mm x 454mm) w/ 0.75" (19mm) Trim Flange 27.52" 15.01" 699mm 381mm 7.45" 189mm 7.19" 18.57" 183mm 472mm 17.07" Double Gimbal 434mm 23.39" 594mm 5.69" 145mm 5.69" 45º x 45º Adjust 145mm *Media Holder: White - LND-MH-W Black - LND-MH-B Silver - LND-MH-S Integral Electronic Metal Halide Ballasts For use with 39W or 70W PAR30MH lamps. Thermal Protector ORDERING INFORMATION C3 Configuration C3 = COMBOLIGHT Recessed Three (3) Light E Lamp Type / Wattage Label 039M30 = 39 Watt PAR30 Metal Halide 070M30 = 70 Watt PAR30 Metal Halide Housing N = New Construction C = Chicago Plenum www.cooperlighting.com T Power Supply Voltage 1 = 120V 2 = 277V 4 = 240V Power Supply E = Electronic Metal Halide Ballast Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal Trim Flange T = 0.75" (19mm) Trim Flange Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Trim Finish W = White B = Black S = Industrial Silver Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver rev 05/16/2013