Catalog # Type Project Comments

advertisement
DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes SIX (6) 12V MR16 lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
Comments
at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic or magnetic low
voltage transformers. Transformers and
electrical are mounted in a separate
metal enclosure box attached to the
junction box with 18" (457mm) of flexible
conduit. Transformer enclosure includes
a separated wiring compartment and six
knockouts for conduit entry. Transformer
enclosure features perforated metal door
for easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and transformer enclosure) is removable
from the housing for easy maintenance.
E.... Lamps
Six (6) 12V MR16 lamps mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
Double
Gimbal
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 5.13" x 24.34"
(130mm x 618mm)
Six (6) Light
12V MR16
Remodel Housing
Trimless
26.05"
8.50"
662mm
216mm
6.25"
45º x 45º
Adjust
159mm
1.60"
41mm
10.24"
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
29.61"
260mm
752mm
5.75"
24.08"
146mm
612mm
Required
above ceiling
20.15"
23.25"
512mm
591mm
3.88"
99mm
Integral Low Voltage Transformers
6.50"
165mm
3.88"
99mm
Separate Wiring Compartment
Perforated
Meshplate
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.
18" (457mm) flexible conduit
Thermal
Protector
ORDERING INFORMATION
C6
Configuration
C6 = COMBOLIGHT
Recessed Six (6) Light
R
N
Lamp Type / Wattage Label
037M16 = 37 Watt max. MR16 12V
042M16 = 42 Watt max. MR16 12V
050M16 = 50 Watt max. MR16 12V
071M16 = 71 Watt max. MR16 12V
Housing
R = Remodel
www.cooperlighting.com
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
N
Lamp Mechanism
G = Standard Double Gimbal
R = Retractable Double Gimbal
E = Regressed Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/08/2013
Download