DESCRIPTION An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes THREE (3) 12V MR16 lamps. Catalog # Type Project For remodel applications. Insulation must be kept 3" (76mm) from all sides and Comments at least 1" (25mm) above the housing. Date Prepared by SPECIFICATION FEATURES A.... Housing Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. D.... Electrical Integral electronic or magnetic low voltage transformers. Transformers and electrical are mounted in a separate metal enclosure box attached to the junction box with 18" (457mm) of flexible conduit. Transformer enclosure includes a separated wiring compartment and four knockouts for conduit entry. Transformer enclosure features perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and transformer enclosure) is removable from the housing for easy maintenance. E.... Lamps Three (3) 12V MR16 lamps mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture F.... Mounting A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws. Three (3) Light 12V MR16 G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. Remodel Housing Trimless Ceiling Cut-Out: 5.13" x 12.72" (130mm x 323mm) Double Gimbal 8.50" 14.42" 216mm 366mm 45º x 45º Adjust 6.25" 159mm 1.60" 41mm 10.24" 17.99" 5.75" 260mm 457mm 146mm Required above ceiling 10.20" 259mm 12.45" 316mm 11.63" 295mm 3.88" 99mm Integral Low Voltage Transformers *Media Holder: White - LNB-MH-W Black - LNB-MH-B Silver - LNB-MH-S 6.50" 3.88" 165mm 99mm Separate Wiring Compartment Perforated Meshplate NOTES: De-Rated wattage labels are available. 12V Primary voltage is available. 71W magnetic transformers are remote and sold separately. 18" (457mm) flexible conduit Thermal Protector ORDERING INFORMATION C3 Configuration C3 = COMBOLIGHT Recessed Three (3) Light R N Lamp Type / Wattage Label 037M16 = 37 Watt max. MR16 12V 042M16 = 42 Watt max. MR16 12V 050M16 = 50 Watt max. MR16 12V 071M16 = 71 Watt max. MR16 12V Housing R = Remodel www.cooperlighting.com Power Supply Voltage 1 = 120V 2 = 277V 4 = 240V Power Supply E = Electronic Low Voltage Transformer M = Magnetic Low Voltage Transformer N Lamp Mechanism G = Standard Double Gimbal R = Retractable Double Gimbal E = Regressed Double Gimbal Trim Insert N = Trimless Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Trim Finish N = Trimless Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver rev 05/08/2013