DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes FIVE (5) T4 GU6.5 Metal Halide
(GE ® Constant Color Super Mini) lamps.
For remodel applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are mounted in a separate metal enclosure box attached to the junction box with
18" (457mm) of flexible conduit. Ballast enclosure includes a separated wiring compartment and two knockouts for conduit entry and features a perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and ballast enclosure) is removable from the housing for easy maintenance.
optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes
GU6.5 TAL sockets.
F ... Mounting
A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws through the meshplate.
E ... Lamps
Five (5) T4 GU6.5 Metal Halide lamps with reflectors mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed
1 "  (25mm) for additional cut-off. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one
G ... Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 5.90" x 24.32"
(150mm x 618mm)
Double
Gimbal
45º x 45º
Adjust
9.27"
236mm
7.95"
202mm
7.45"
189mm
Required above ceiling
26.02"
661mm
1.60"
41mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
20.55"
522mm
10.96"
278mm
34.77"
883mm
24.05"
611mm
23.23"
590mm
4.65"
118mm
®
Integral Electronic Metal
Halide Ballasts 9.25"
235mm
4.65"
118mm
Separate Wiring Compartment
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE ® SuperMini Constant Color Lamp and includes high-performance clear aluminum reflectors in narrow, medium, or wide distributions. Non-standard color reflectors are available upon request.
ORDERING INFORMATION
18" (457mm) flexible conduit
Thermal
Protector
C5
Configuration
C5 = COMBOLIGHT
Recessed Five (5) Light
R www.cooperlighting.com
E N N
Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM =
020MCW =
039MCN =
20 Watt T4 GU6.5 SuperMini Medium
20 Watt T4 GU6.5 SuperMini Wide
39 Watt T4 GU6.5 SuperMini Narrow
39 Watt T4 GU6.5 SuperMini Medium 039MCM =
Housing
R = Remodel
039MCW = 39 Watt T4 GU6.5 SuperMini Wide
Power Supply
Voltage
1 =
2 =
4 =
120V
277V
240V
Lamp Mechanism
G
R
=
=
Double Gimbal
Retractable Double Gimbal
Power Supply
E = Electronic Metal Halide
Ballast
Trim Insert
N = Trimless
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W
B
S
= White
= Black
= Industrial Silver rev 05/14/2013