DESCRIPTION
Catalog #
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) T4 GU6.5 Metal Halide Project
(GE® Constant Color Super Mini) lamps in a 2x2 square configuration.
Type
Comments
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a clean
edge. Can accommodate 0.50" (13mm) to
1.25" (32mm) ceiling thickness. Optional
Chicago Plenum configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
Four (4) T4 GU6.5 Metal Halide lamps
with reflectors mounted in adjustable
double gimbals. Lamp holder is
individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GU6.5 TAL sockets.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
Four (4) Light Square
T4 GU6.5 Metal Halide
New Construction
Housing
Trimless
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 10.09" x 10.09"
(256mm x 256mm)
22.82"
22.88"
580mm
581mm
7.45"
189mm
17.70"
18.74"
450mm
9.29"
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
476mm
236mm
Double
Gimbal
4.65"
118mm
Thermal
Protector
45º x 45º
Adjust
9.29"
236mm
Integral Electronic
Metal Halide Ballasts
4.65"
118mm
Perforated
Meshplate
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE® SuperMini Constant Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
ORDERING INFORMATION
CX
Configuration
CX = COMBOLIGHT
Recessed Four (4) Light
Square
E
Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide
039MCN = 39 Watt T4 GU6.5 SuperMini Narrow
039MCM = 39 Watt T4 GU6.5 SuperMini Medium
039MCW = 39 Watt T4 GU6.5 SuperMini Wide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
N = None
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/14/2013