DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes TWO (2) T4 GU6.5 Metal Halide
(GE® Constant Color Super Mini) lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18" (457mm) of flexible conduit. Ballast
enclosure includes a separated wiring
compartment and two knockouts for
conduit entry and features a perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and ballast enclosure)
is removable from the housing for easy
maintenance.
E.... Lamps
Two (2) T4 GU6.5 Metal Halide lamps with
reflectors mounted in adjustable double
gimbal. Lamp holder is individually
removable and may be regressed
1" (25mm) for additional cut-off. 45° x 45°
locking lamp adjustment. Lamp ring
features beveled edge and lockable
accessory ring that can accept one
optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GU6.5 TAL sockets.
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Two (2) Light
T4 GU6.5 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Remodel Housing
Trimless
Ceiling Cut-Out: 5.90" x 10.38"
(150mm x 264mm)
Double
Gimbal
7.45"
9.27"
189mm
236mm
12.09"
307mm
Required
above
ceiling
45º x 45º
Adjust
7.95"
202mm
1.60"
41mm
10.96"
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
17.70"
278mm
450mm
9.29"
10.12"
257mm
236mm
8.22"
4.65"
209mm
118mm
Integral Electronic
Metal Halide Ballasts
9.25"
235mm
4.65"
118mm
Separate Wiring
Compartment
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE® SuperMini Constant Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
Thermal
Protector
18" (457mm) flexible conduit
ORDERING INFORMATION
C2
Configuration
C2 = COMBOLIGHT
Recessed Two (2) Light
R
E
Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide
039MCN = 39 Watt T4 GU6.5 SuperMini Narrow
039MCM = 39 Watt T4 GU6.5 SuperMini Medium
039MCW = 39 Watt T4 GU6.5 SuperMini Wide
Housing
R = Remodel
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/14/2013