DESCRIPTION Catalog # An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes THREE (3) T4 GU6.5 Metal Halide Project (GE® Constant Color Super Mini) lamps. For new construction applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing. Type Comments Date Prepared by SPECIFICATION FEATURES A.... Housing Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50" (13mm) to 1.25" (32mm) ceiling thickness. Optional Chicago Plenum configuration available. conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. E.... Lamps Three (3) T4 GU6.5 Metal Halide lamps with reflectors mounted in adjustable double gimbals. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept D.... Electrical Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be configured for remote power. C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes GU6.5 TAL sockets. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture F.... Mounting Butterfly Brackets accept 1/2" (13mm) EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall. Three (3) Light T4 GU6.5 Metal Halide New Construction Housing Trimless G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. Ceiling Cut-Out: 5.44" x 14.73" (138mm x 374mm) 27.52" 15.01" 699mm 381mm 7.45" 189mm 10.96" 23.39" 278mm *Media Holder: White - LNC2-MH-W Black - LNC2-MH-B Silver - LNC2-MH-S 594mm 13.94" Double Gimbal 4.65" 354mm 118mm 45º x 45º Adjust 4.65" 118mm Perforated Meshplate T4 GU6.5 Lamp with Reflectors This fixture utilizes the GE® SuperMini Constant Color Lamp and includes high-performance clear aluminum reflectors in narrow, medium, or wide distributions. Non-standard color reflectors are available upon request. Thermal Protector Integral Electronic Metal Halide Ballasts ORDERING INFORMATION C3 E Configuration C3 = COMBOLIGHT Recessed Three (3) Light Lamp Type / Wattage Label / Reflector Type 020MCN = 20 Watt T4 GU6.5 SuperMini Narrow 020MCM = 20 Watt T4 GU6.5 SuperMini Medium 020MCW = 20 Watt T4 GU6.5 SuperMini Wide 039MCN = 39 Watt T4 GU6.5 SuperMini Narrow 039MCM = 39 Watt T4 GU6.5 SuperMini Medium 039MCW = 39 Watt T4 GU6.5 SuperMini Wide Housing N = New Construction C = Chicago Plenum www.cooperlighting.com N Power Supply Voltage 1 = 120V 2 = 277V 4 = 240V Power Supply E = Electronic Metal Halide Ballast N Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal Trim Insert N = Trimless Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801 Trim Finish N = None Housing Interior/Electrical Door /Sleeve Finish W = White B = Black S = Industrial Silver rev 05/14/2013