DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FIVE (5) CDM-TM Metal Halide
(Philips® Mini Master Color) lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a clean
edge. Can accommodate 0.50" (13mm) to
1.25" (32mm) ceiling thickness. Optional
Chicago Plenum configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
Five (5) CDM-TM Metal Halide lamps
with reflectors mounted in adjustable
double gimbals. Lamp holder is
individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
PGJ5 socket.
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for securing
to structure. Perforated flaps along housing
sides for securing trimless insert to fixture
and drywall.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Five (5) Light
CDM-TM Metal Halide
New Construction
Housing
Trimless
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 5.44" x 24.02"
(138mm x 610mm)
15.01"
38.90"
381mm
988mm
7.45"
189mm
10.96"
34.77"
278mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
883mm
23.23"
Double
Gimbal
590mm
4.65"
118mm
45º x 45º
Adjust
4.65"
118mm
Perforated
Meshplate
CDM-TM Lamp with Reflectors
This fixture utilizes the Philips® Mini Master Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
Thermal
Protector
Integral Electronic
Metal Halide Ballasts
ORDERING INFORMATION
C5
Configuration
C5 = COMBOLIGHT
Recessed Five (5) Light
E
Lamp Type / Wattage Label / Reflector Type
020MMN = 20 Watt CDM-TM Mini Master Color Narrow
020MMM = 20 Watt CDM-TM Mini Master Color Medium
020MMW = 20 Watt CDM-TM Mini Master Color Wide
039MMN = 39 Watt CDM-TM Mini Master Color Narrow
039MMM = 39 Watt CDM-TM Mini Master Color Medium
039MMW = 39 Watt CDM-TM Mini Master Color Wide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
N = None
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/13/2013