DESCRIPTION
Catalog #
An adjustable Single-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes ONE (1) PAR20 120V Project
lamp.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Type
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75" (19mm) flange around the ceiling
opening and to help conceal the inner
hardware of the fixture from sight
below the ceiling. Can accommodate
0.50" (13mm) to 1.25" (32mm) ceiling
thickness. Optional Chicago Plenum
configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
One (1) PAR20 120V lamp mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
med. base socket.
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 5.44" x 5.44"
(138mm x 138mm)
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
PAR20 120V
New Construction
Housing
w/ 0.75" (19mm) Trim Flange
16.14"
16.14"
15.01"
410mm
381mm
7.45"
189mm
6.15"
6.15"
156mm
156mm
12.01"
Double
Gimbal
305mm
4.65"
118mm
45º x 45º
Adjust
4.65"
118mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
Electrical Enclosure /
Wiring Compartment
Thermal
Protector
For use with PAR20 120V lamps 50W max.
ORDERING INFORMATION
C1
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
N
Lamp Type / Wattage Label
050P20 = 50 Watt max. PAR20 120V
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
1
Primary Voltage
1 = 120V
Power Supply
N = None - Line Voltage Lamp
T
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/03/2013