COMBOLIGHT Catalog # Type Project

advertisement
DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes SIX (6) 12V PAR36
lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75" (19mm) flange around the ceiling
opening and to help conceal the inner
hardware of the fixture from sight
below the ceiling. Can accommodate
0.50" (13mm) to 1.25" (32mm) ceiling
thickness. Optional Chicago Plenum
configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.
E.... Lamps
Six (6) 12V PAR36 lamps mounted in
adjustable double gimbals. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming.
F.... Mounting
Butterfly Brackets accept 1/2" (19mm)
EMT, C Channel, T-bar fasteners, and
bar hangers. Four tabs on housing for
securing to structure.
G.... Label
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 7.49" x 40.93"
(190mm x 1040mm)
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Six (6) Light
12V PAR36
New Construction
Housing
w/ 0.75" (19mm) Trim Flange
50.58"
16.01"
1285mm
407mm
9.45"
240mm
8.19"
41.63"
208mm
46.45"
1180mm
Double
Gimbal
1057mm
40.13"
1019mm
6.69"
170mm
6.69"
170mm
*Media Holder:
White - LNE-MH-W
Black - LNE-MH-B
Silver - LNE-MH-S
45º x 45º
Adjust
Integral Low Voltage
Transformers
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
75W and 100W electronic and magnetic transformers are remote and sold separately.
Thermal
Protector
ORDERING INFORMATION
C6
Configuration
C6 = COMBOLIGHT
Recessed Six (6) Light
T
Lamp Type / Wattage Label
050P36 = 50 Watt max. PAR36 12V
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/23/2013
Download