DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange suitable for downlighting and accent applications. Utilizes THREE (3) 12V
AR111 lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a
0.75" (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate
0.50" (13mm) to 1.25" (32mm) ceiling thickness. Optional Chicago Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic or magnetic low voltage transformers on individually removable “trays” for easy maintenance.
May also be configured for remote power.
E ... Lamps
Three (3) 12V AR111 lamps mounted in adjustable double gimbals. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming.
F ... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure.
G ... Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 7.49" x 20.86"
(190mm x 530mm)
16.01"
407mm
30.52"
775mm
9.45"
240mm
®
w/ 0.75" (19mm) Trim Flange
8.19"
208mm
Double
Gimbal
21.56"
548mm
26.39"
670mm
20.06"
510mm
6.69"
170mm
6.69"
170mm
*Media Holder:
White - LNE-MH-W
Black - LNE-MH-B
Silver - LNE-MH-S
45º x 45º
Adjust
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
75W and 100W magnetic transformers are remote and sold separately.
ORDERING INFORMATION
Integral Low Voltage
Transformers
Thermal
Protector
C3
Configuration
C3 = COMBOLIGHT
Recessed Three (3) Light www.cooperlighting.com
T
Lamp Type / Wattage Label
050A11 = 50 Watt max. AR111 12V
075A11 =
100A11 =
75 Watt max. AR111 12V
100 Watt max. AR111 12V
Power Supply
Voltage
1 =
2 =
4 =
120V
277V
240V
Lamp Mechanism
G
R
=
=
Double Gimbal
Retractable Double Gimbal
Trim Finish
W = White
B
S
= Black
= Industrial Silver
Housing
N
C
=
=
New Construction
Chicago Plenum
Power Supply
E = Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
Trim Flange
T = 0.75" (19mm)
Trim Flange
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Housing Interior/Electrical Door/Sleeve
Finish
W =
B =
White
S =
Black
Industrial Silver rev 05/20/2013