,-
Á
DESCRIPTION
Extended depth collar allows P4 series 4-inch square aperture housing
platforms to be modified in the field to adapt to ceiling thickness from
1" to 2". Use with all lamp modules and most optical elements.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
EDC4X41
Matte black steel collar adjusts
vertically from 1" to 1-1/2" thick
ceilings and can be rotated +/- 7.5°
thru the aperture. Integral gun
sights facilitate the use of guide
strings or laser lines. Remove and
replace standard collar by
removing (4) Philips drive screws.
Use with E4DL_, E4MR_ and
E4CMH_, optical elements. Mouse
trap spring must be repositioned to
upper position to provide proper
trim retention. Not recommended
for use with E4LWW_, E4PIN_ AND
E4RPIN_.
EDC4X42
Matte black steel collar adjusts
vertically from 1-1/2" to 2" thick
ceilings and can be rotated +/- 7.5°
thru the aperture. Integral gun
sights facilitate the use of guide
strings or laser lines. Remove and
replace standard collar by
removing (4) Philips drive screws.
Use with E4DL_, E4MR_ and
E4CMH_ optical elements. Mouse
trap spring must be repositioned to
upper position to provide proper
trim retention. Not recommended
for use with E4LWW_, E4PIN_ AND
E4RPIN_.
EDC4X41
EDC4X42
Extended Depth Collars
4-Inch Square
EDC4X41
EDC4X42
NOTE:
Use of the EDC4x41 or EDC4x42 extended depth collars may change maximum aiming
angle AWD or photometric performance. Contact Application Engineering for further details.
ORDERING INFORMATION
EDC4X41 = Extended depth collar for 1” – 1-1/2” thick ceilings
EDC4X42 = Extended depth collar for 1-1/2” – 2” thick ceilings
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADI071962
09/30/2011 1:27:30 PM