PORTFOLIO TM
D ES C R IPTION
Low brightness 7-3/8-inch aperture open wall wash for use with a 26W or
32W Triple twin tube 4-pin lamp. The geometric reflector maximizes flux
toward the wall and is spectrally neutral leaving the color temperature
and color rendering unchanged. Available in single, double and corner
wallwash versions. The one piece design eliminates light leaks at the
ceiling. Standard features include low iridescent finish on all reflectors,
electronic ballast and venting to ensure lamp life and lumen output.
Optics offer unparalleled performance with uniform illuminance on wall
with no flashback. Medium beam, wide beam, lensed reflectors and open
wallwash trims are interchangeable within the same housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Hous i ng Mountin g Frame
S ock et
Injection molded Geometric
Reflector for Uniform Vertical
Illumination is vacuum metallized
with polysiloxane hardcoat finish.
One piece spun macrofocal
parabolic downlight reflector, .050
thick aluminum, available in a
variety of Alzak® finishes. Positive
reflector mounting pulls trim tight
to ceiling. Reflector can be rotated
90° for alignment with wall.
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
4-pin GX24q-3 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
Electron ic B allast
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of
lamp life protection is standard.
U ni v e rs a l Moun ting B racket
Condui t F i tti ngs
Labels
Trim Ring Options
Die cast screw tight connectors.
cULus listed, standard damp label.
Self flanged or molded white trim
ring. Rimless or metal trim ring
accessories available.
J unc ti on Box
So c k e t C a p
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. 1/2" and
two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
C7042
7011/10
7021/20
7031/30
26W, 32W TTT or PLT
Compact Fluorescent
STEPREPEAT>
7-Inch Open Wall Wash
ENERGY DATA
26W TTT 4-pin
Top View
10-3/4"
Ballast: Electronic
CP
11-1/4"
13-5/16"
[338mm]
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 29
Line Amps: 0.10
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
32W TTT 4-pin
13-7/8"
[352mm]
Ballast: Electronic
120V Input Watts: 36
Line Amps: 0.32
277V Input Watts: 36
Line Amps: 0.16
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (10°F)
17"
[432mm]
7-3/8" [187mm]
8-1/8" [206mm]
8-3/4" [222mm]
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
17-5/8"
[447mm]
( w i t h E M O p t i o n)
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP040647
2013-09-26 16:12:33
C7042 7011/10 7021/20 7031/30
OR D ER ING INFOR M A TION
EXAMPLE: C7042E 7011H
Housing
Wa tt a ge
Ballast
Options
E=120/277V 50/60
Hz Electronic
3E=347V 50/60 Hz
Electronic
D5LT26=26W 120-277V
Fifth Light (DALI Dimming)
D5LT32=32W 120-277V
Fifth Light (DALI Dimming)
3D5LT26/32=26 or 32W
347V Fifth Light (DALI
Dimming)
D26/32=26 or 32W 120277V Lutron Ecosystem
Dimming
EDR26=DeRated Wattage
Label, 26W
EDR32=DeRated Wattage
Label, 32W
C70=7" CF
Vertical
42=(1) 26W or
32W TTT or PLT
Lamp
Tri m s
CP= Chicago
Plenum
EM=Emergency
Module
with RemoteTest
Switch
Finish
Options
LI=Low Iridescent Clear
H=Haze
WMH=Warm Haze
G=Gold
WH=Wheat
W=Gloss White
GP=Graphite
GPH=Graphite Haze
7011=Single Wall
Wash, Self-Flanged
7010=Single Wall
Wash, Molded Trim
Ring, White
7021=Double Wall
Wash, Self-Flanged
7020=Double Wall
Wash, Molded Trim
Ring, White
7031=Corner Wall
Wash, Self-Flanged
7030=Corner Wall
Wash, Molded Trim
Ring, White
WF=White
Painted
Flanged (Self
Flanged only)
A c c e s s o ri e s
HB26=C Channel Bar Hangers,
26" Long, Pair
HB50=C Channel Bar Hangers,
50" Long, Pair
TRM7=Metal Trim Ring, Specify
Finish 1
TRR7=Rimless Trim Ring, White 1
FK5=5 Amp Field Installable
Fuse Kit 300V Max
RMB-22=Wood Joist Bar Hanger,
22" Long, Pair
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options).
PHOTOM ETR IC S
C7042 7011/10, 7021/20, 7031/30
Candlepower Distribution
500
Test No. H23178
C7042 7010LI
Lamp=32W TTT
Lumens=2400
750
Efficiency=56.4%
250
1000
1250
0°
180°
1500
2'6" Distance From Wall
180°
Dwnlt
Deg.
0°
Wall
CD/SQ M
180°
Dwlt
Deg.
0°
Wall
0
5
1326
1294
1326
1371
45
55
11490
7209
10977
696
15
25
35
969
646
451
1195
850
558
65
75
85
5407
4344
3745
601
701
832
45
55
224
114
214
11
65
63
7
75
31
5
85
90
9
0
2
0
3' Distance From Wall
2
Spacing Between Fixtures
–––––– 3' ––––––
–––––– 4' ––––––
8
8
8
7
5
7
14
13
14
12
9
12
3
4
19
19
16
18
19
19
16
15
10
13
5
16
16
16
13
6
7
14
11
14
11
14
11
11
9
8
9
9
9
9
10
8
6
8
7
8
6
DD
1
A v e r a ge
Luminance
Candlepower
DD
1
Single Fixture 2'6" From Wall
6'
1
2
6
11
5
8
3
4
1
2
0
1
0
0
0
0
3
4
14
12
11
10
5
6
2
3
1
1
0
0
0
0
5
6
9
6
7
5
6
5
4
3
2
2
1
1
0
1
7
8
5
4
4
3
2
1
1
9
4
3
3
3
3
2
2
2
2
2
1
1
0
1
10
2
2
2
2
1
1
1
4' Distance From Wall
Spacing Between Fixtures
–––––– 3' ––––––
–––––– 4' ––––––
2
6
11
6
10
6
11
6
8
4
7
6
8
16
15
3
4
13
15
12
14
13
15
11
12
8
11
12
13
5
15
14
15
12
10
9
11
9
6
7
13
11
13
11
13
11
11
9
8
8
8
8
9
9
9
6
5
6
6
6
5
9
10
8
7
8
7
8
7
DD
1
Spacing Between Fixtures
–––––– 4' ––––––
–––––– 6' ––––––
2
2
5
2
4
2
5
2
3
1
3
2
3
11
12
3
4
6
8
6
7
6
8
5
6
4
4
5
6
11
12
5
8
8
8
6
5
6
10
9
11
9
6
7
9
8
8
8
9
8
6
6
5
5
6
6
8
8
8
8
7
7
7
5
5
5
7
6
7
6
7
6
9
10
7
6
7
6
7
6
5
4
5
4
5
4
Distance
From Wall
Notes:
• Illuminance values for multiple fixtures are based upon the center two units of a four unit array. Footcandle values are
centerline of fixtures and centered between fixtures.
• Illuminance values are cosine corrected initial values with no contribution from inter reflections from other room
surfaces. Total illumination may increase from contributions from other surfaces.
•
Distance From Fixture Along Wall
1'
2'
3'
4'
5'
DD
Spacing Between
Fixtures
DD=Distance Down
From Ceiling
Changing fixture spacing will affect illuminance level.
New Fc=
Existing Spacing x Average Table Fc Level
New Spacing
• When selecting colored cones option, only downlight cone is colored; the wall wash reflector is specular clear. This
allows the color (CRI, °K) of the light source to be unaffected and maximizes lumen output.
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
CL
ADP040647
2013-09-26 16:12:33