HALO Commercial
d esc r iption
Type
Catalog #
Recessed 8 inch aperture lens downlight for vertical ED17P metal
halide lamp. Electronic ballast suitable for 120 volt or 277 volt
operation. Fixture is suitable for commercial construction and
wet location listed. Insulation must be kept 3” from top and sides
of housing. Specify housing and trim separately to complete
luminaire.
Project
Date
Comments
Prepared by
S P E C I F I C A T I O N feat u r es
Socket Cap
One piece metal cap attached
securely to reflector with turn and
lock mechanism.
M ec h anica l
Frame
Boat shaped galvanized steel
frame with 1/2" plaster lip
accommodates ceilings up to
2" thick. May be used for new
construction or remodeling
installations. Provided with (2)
remodel clips to secure frame
when installed from below the
ceiling.
allows for tool-less lens exchange
from below the ceiling. Available
with clear, diffuse, prismatic,
fresnel or drop opal glass lens.
Self flanged standard.
-Specular Reflectors - Polished flange standard with white painted flange option.
-Baffles and White Reflector - White painted flange standard.
Mounting Brackets
Bar hanger receivers adjusts 2"
vertically from above the ceiling
or thru the aperture. Use with
No Fuss™ bar hangers or with
1/2" EMT. Removable to facilitate
installation from below the
ceiling.
Trim Retention
Code Compliance
Reflector is retained with two
torsion springs and held tightly to - Thermally protected and cULus listed for wet locations.
the finished ceiling surface.
No Fuss™ Bar Hangers
Pre-installed and centered bar
hanger locks to tee grid with a
screwdriver or pliers. Centering
marks on the bar hanger
mechanism allows consistent
positioning of fixtures.
O ptica l
Reflector
One piece aluminum reflector
secures lens in place with
integrated spring clips for a
visually comfortable optic and
Control Gear
Dual input 120V/277V or 347V
electronic ballast.
Insulation Detector
Self heating insulation detector
opens circuit if insulation is
improperly installed.
E l ect r ica l
Junction Box
(6) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (12)
#12 AWG (six in, six out) 90°C
conductors and feed thru branch
wiring.
- IP44 rated for open trims.
Lamp Socket
Pulse rated E26 medium base
protected porcelain socket
with nickel plated brass screw
shell accepts open fixture rated
(protected) lamp only.
- Meets California T20 and EISA ballast efficiency standards.
- EMI/RFI per FCC Title 47 CFR, Part 18, non consumer limits.
- High efficacy luminaire may be used to meet IECC, ASHRAE, and Title 24 commercial standards.
PD8V50E
PD8V70E
PD8V100E
PD8V150E
80V
50, 70, 100, 150W
ED17P
Metal Halide
8-Inch Aperture
Lens Downlight
New Construction or
Remodel
Non-IC
DIMENSIONS
9.376"
[238.16mm]
8.375" I.D.
[212.73mm]
9.250"
[234.95mm]
9.750" O.D
[247.65mm]
26.400"
[670.56mm]
9.472"
[240.59mm]
16.181"
[410.99mm]
ADV111720
January 4, 2013 4:52 PM
HALO Commercial
PD8V50E
PD8V70E
P D 8 V 10 0 E
PD8V150E
80V
E N E R G Y D ATA
PD8V50E, PD8CPV50E
Min. Starting Temp -15°C,
+5°F
Sound Rating Class A
PD8V70E, PD8CPV70E
Min. Starting Temp -15°C,
+5°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
Input Frequency 50/60 Hz
Power Factor > 0.95
Input Frequency 50/60 Hz
Power Factor > 0.95
THD < 10% @ 120V
Input Voltage
120V/277V ±10%
THD < 6% @ 120V
Input Voltage
120V/277V ±10%
THD < 13% @ 277V
THD < 12% @ 277V
Crest factor < 1.5
Ballast factor 1.00
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency
140 Hz
cULus Listed, Type 1 Outdoor
Operating Frequency
140 Hz
cULus Listed, Type 1 Outdoor
Input Power 58W @ 120V
50ED17P, MHC50/U/MPX
50ED17, MXR50/U/MED/O
50ED17, MP50/U/MED
Input Power 57W @ 277V
Input Current 0.50A @ 120V
Input Power 81W @ 120V
70ED17P, MHC70/U/MP
70ED17, MXR70/U/MED/O
70ED17, MP70/U/MED
Input Current 0.23A @ 277V
Sound Rating Class A
Min. Starting Temp -30°C,
-22°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Input Frequency 50/60 Hz
Power Factor > 0.99
Input Frequency 50/60 Hz
Power Factor > 0.99
THD < 10%
Input Voltage 347V
THD < 10%
Input Voltage 347V ±10%
Crest factor < 1.6
Ballast factor 1.00
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency
170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor, HL
Operating Frequency
170 Hz
UL Listed, cUL Certified, Class
P, Type 1 Outdoor, HL
Input Power 56W
70ED17P, MHC70/U/MP
70ED17, MXR70/U/MED/O
70ED17, MP70/U/MED
Input Power 80W
50ED17P, MHC50/U/MPX
50ED17, MXR50/U/MED/O
50ED17, MP50/U/MED
Input Current 0.16A @ 347V
PD8P150E, PD8CPP150E
Min. Starting Temp -20°C,
-4°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer Limits
Input Frequency 50/60 Hz
Power Factor > 0.90
THD < 15%
Input Voltage
120V - 277V ±10%
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency < 200 Hz
UL, CSA, EISA
Input Power 165W @ 120V
150ED17P, MHC150/U/MP
150ED17, MXR150/U/MED/O
150ED17, MP150/U/MED
Input Power 161W @ 277V
Input Current 1.4A @ 120V
Input Current 0.6A @ 277V
PD8P1503E
Min. Starting Temp -30°C,
-22°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer Limits,
Subparts C
Input Frequency 50/60 Hz
Power Factor > 0.99
THD < 10%
Input Voltage 347V ±10%
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor, HL
150ED17P, MHC150/U/MP
150ED17, MXR150/U/MED/O
150ED17, MP150/U/MED
Input Power 166W
Input Current 0.475A @ 347V
Input Frequency 50/60 Hz
Power Factor > 0.95
THD < 8% @ 120V
Input Voltage
120V/277V ±10%
THD < 11% @ 277V
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency 140 Hz
cULus Listed, Type 1 Outdoor
Input Power 112W @ 120V
100ED17P, MHC100/U/MP
100ED17, MXR100/U/MED/O
100ED17, MP100/U/MED
Input Current 0.23A @ 347V
Input Power 109W @ 277V
Input Current 0.96A @ 120V
Input Current 0.43A @ 277V
Input Current 0.69A @ 120V
PD8V703E
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer Limits
PD8V1003E
Input Current 0.30A @ 277V
PD8V503E
Min. Starting Temp -30°C,
-22°F
Input Power 80W @ 277V
PD8V100E, PD8CPV100E
Min. Starting Temp -15°C,
+5°F
Min. Starting Temp -30°C,
-22°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer Limits,
Subparts C
Input Frequency 50/60 Hz
Power Factor > 0.99
THD < 10%
Input Voltage 347V ±10%
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency 170 Hz
UL Listed, cUL Certified, Class
P, Type 1 Outdoor, HL
100ED17P, MHC100/U/MP
100ED17, MXR100/U/MED/O
100ED17, MP100/U/MED
Input Power 108W
Input Current 0.31A @ 347V
HALO Commercial
PD8V50E
PD8V70E
P D 8 V 10 0 E
PD8V150E
80V
O r d e r ing info r mation
SAMPLE NUMBER: PD8V70E 80V1GC
O r d e r h o u s i n g , r e fl e c t o r a n d l a m p s e p a r a t e l y f o r a c o m p l e t e l u m i n a i r e .
Housing
PD8V = 8 Inch vertical E26
(protected) metal halide
PD8CPV = 8 Inch vertical
E26 (protected) metal
halide, CCEA listed
(Chicago Plenum)
Wattage / Ballast Option
50E = 50W MH, M110, M148, 120V/277V
503E = 50W MH, M110, M148, 347V
70E = 70W MH, M98, M139, 120V/277V
703E = 70W MH, M98, M139, 347V
100E = 100W MH, M90, M140, 120V/277V
1003E = 100W MH, M90, M140, 347V
150E = 150W MH, M102, M142, 120V/277V
1503E = 150W MH, M102, M142, 347V
Reflector
80V = 8” vertical
Finish Option
C=Specular Clear
G=Specular Gold
H=Semi Specular
Clear
W=White
(White Flange)
BB=Black Baffle
(White Flange)
WB=White Baffle
(White Flange)
Lens Option
1G=Prismatic Glass
2G=Diffuse Glass
3G=Clear Glass
4G=Fresnel Glass
Accessories
HB128APK = L channel hanger bar,
26”, ‘No-Fuss’,
pair (replacement)
RMB22 = 22” long wood joist
mounting bars
Flange Option
Blank=Polished
Flange
(C, G, H)
Blank=White
Flange
(W, BB, WB)
WF=White Flange
(C, G, H)
P H OTO M E T RY
PD8V150E-80V1GC_M150
Candela Distribution
Spacing Criteria = 1.04
Lumens per Watt = 44 LpW
Test No. P21682
Test Model: PD8V150E-80V1GC_M150
Candlepower Distribution Curve
90°
80°
70°
60°
50°
40°
30°
0°
10°
20°
Degrees
Vertical
Candela
0*
4099
Luminance
(Average Candela/M2)
Degree
Cone of Light Footcandles
Avg. 0°
Luminance
Distance to
Illuminated
Plane
Initial Nadir
Footcandles
Beam (ft.)
L
W
Length
Width
5
4012
45
58037
5.5'
136
5.7
5.7
15
3536
55
34589
7'
84
7.3
7.3
25
3038
65
9616
8'
64
8.3
8.3
35
2541
75
728
9'
51
9.3
9.3
45
1679
85
320
10'
41
10.4
10.4
55
866
12'
28
12.5
12.5
65
196
14'
21
14.5
14.5
75
11
85
3
90
0
Beam diameter is to 50% of maximum footcandles, rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate light loss factors where necessary.
Zonal Lumen Summary
*CBCP
Zone
Lumens
% Lamp
% Fixture
0-30
2775.31
25.20
41.70
0-40
4349.04
39.50
65.30
0-60
6413.02
58.30
96.30
0-90
6660.38
60.50
100.00
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
www.cooperlighting.com
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049