HALO Commercial
DESCRIPTION
Type
Catalog #
Recessed 6 inch aperture lens downlight for vertical PAR30L or
PAR38 metal halide lamp. Electronic ballast suitable for 120 volt or
277 volt operation. Fixture is suitable for commercial construction
and wet location listed. Insulation must be kept 3" from top and
sides of housing. Specify housing and trim separately to complete
luminaire.
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
MECHANICAL
Frame
Boat shaped galvanized steel
frame with 1/2" plaster lip
accommodates ceilings up to
2" thick. May be used for new
construction or remodeling
installations. Provided with (2)
remodel clips to secure frame
when installed from below the
ceiling.
Mounting Brackets
Bar hanger receivers adjusts 2"
vertically from above the ceiling
or thru the aperture. Use with
No Fuss™ bar hangers or with
1/2" EMT. Removable to facilitate
installation from below the
ceiling.
No Fuss™ Bar Hangers
Pre-installed and centered bar
hanger locks to tee grid with a
screwdriver or pliers. Centering
marks on the bar hanger
mechanism allows consistent
positioning of fixtures.
OPTICAL
Reflector
One piece aluminum reflector
secures lens in place with
integrated spring clips for a
visually comfortable optic and
allows for tool-less lens exchange
from below the ceiling. Available
with clear, diffuse, prismatic,
fresnel or drop opal glass lens.
Self flanged standard.
-Specular Reflectors - Polished flange standard with white painted flange option.
-Baffles and White Reflector - White painted flange standard.
securely to reflector with turn and
lock mechanism.
Control Gear
Dual input 120V/277V or 347V
electronic ballast.
Insulation Detector
Self heating insulation detector
opens circuit if insulation is
improperly installed.
Code Compliance
- Thermally protected and cULus listed for wet locations.
Trim Retention
-IP44 rated for lens trims
Reflector is retained with two
torsion springs and held tightly to - EMI/RFI per FCC Title 47 CFR, the finished ceiling surface.
Part 18, non consumer limits.
ELECTRICAL
- High efficacy luminaire may be Junction Box
used to meet IECC, ASHRAE, (6) 1/2" and (2) 3/4" trade size pry and Title 24 commercial outs positioned to allow straight standards.
conduit runs. Listed for (12)
- Meets California T20 and
#12 AWG (six in, six out) 90°C
conductors and feed thru branch Federal EISA ballast efficiency standards.
wiring.
Lamp Socket
Pulse rated E26 medium base
protected porcelain socket with
nickel plated brass screw shell.
PD6P39E
PD6P70E
PD6P100E
60V
39, 70, 100W
PAR30L, PAR38
Metal Halide
6-Inch Aperture
Lens Downlight
New Construction or
Remodel
Socket Cap
One piece metal cap attached
Non-IC
DIMENSIONS
8.887"
[225.73mm]
6.375" I.D.
[161.93mm]
7.250"
[184.15mm]
7.750" O.D
[196.85mm]
26.400"
[670.56mm]
7.432"
[188.77mm]
13.109"
[332.98mm]
ADV111749
December 11, 2012 1:05 PM
HALO Commercial
PD6P39E
PD6P70E
P D 6 P 10 0 E
60V
E N E R G Y D ATA
PD6P39E, PD6CPP39E
Min. Starting Temp -15°C, +5°F
PD6P70E, PD6CPP70E
Sound Rating Class A
Min. Starting Temp -15°C, +5°F
Sound Rating Class A
PD6P100E, PD6CPP100E
Min. Starting Temp -15°C, +5°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
Input Frequency 50/60 Hz
Power Factor > 0.95
Input Frequency 50/60 Hz
Power Factor > 0.95
Input Frequency 50/60 Hz
Power Factor > 0.95
THD < 4% @ 120V
Input Voltage
120V/277V ±10%
THD < 6% @ 120V
Input Voltage
120V/277V ±10%
THD < 8% @ 120V
Input Voltage
120V/277V ±10%
THD < 9% @ 277V
THD < 12% @ 277V
THD < 11% @ 277V
Crest factor < 1.5
Ballast factor 1.00
Crest factor < 1.5
Ballast factor 1.00
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency 140 Hz
cULus Listed,
Type 1 Outdoor
Operating Frequency 140 Hz
cULus Listed, Type 1
Outdoor
Operating Frequency 140 Hz
cULus Listed, Type 1
Outdoor
Input Power 46W
39PAR30L, CDM35/PAR30L/M/
39PAR30L, CMH39PAR30L/
39PAR30LN, MCP39PAR30LN/U/
Input Current
0.39A @ 120V
Input Current
0.18A @ 277V
70PAR30L, CDM70/PAR30L/M/
70PAR30L, CMH70PAR30L/
70PAR30LN, MCP70PAR30LN/U/
70PAR38, CDM70/PAR38/
70PAR38, CMH70PAR38/
70PAR38, MCP70PAR38/U/
PD6P393E
Min. Starting Temp -30°C,
-22°F
Input Power
81W @ 120V
Input Power
80W @ 277V
Input Current
0.69A @ 120V
Input Power
112W @ 120V
100PAR38, CDM100/PAR38/
100PAR38, CMH100PAR38/
100PAR38, MCP100PAR38/U/
Input Current
0.30A @ 277V
Input Power
109W @ 277V
Input Current
0.96A @ 120V
Input Current
0.43A @ 277V
Sound Rating Class A
PD6P703E
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Min. Starting Temp -30°C, -22°F
PD6P1003E
Sound Rating Class A
Min. Starting Temp -30°C, -22°F
Sound Rating Class A
Input Frequency 50/60 Hz
Power Factor > 0.99
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
THD < 10%
Input Voltage
347V ±10%
Input Frequency 50/60 Hz
Power Factor > 0.99
Input Frequency 50/60 Hz
Power Factor > 0.99
Crest factor < 1.6
Ballast factor 1.00
THD < 10%
Input Voltage
347V ±10%
THD < 10%
Input Voltage
347V ±10%
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
Crest factor < 1.6
Ballast factor 1.00
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
100PAR38, CDM100/PAR38/
100PAR38, CMH100PAR38/
100PAR38, MCP100PAR38/U/
Input Power 108W
39PAR30L, CDM35/PAR30L/M/
39PAR30L, CMH39PAR30L/
39PAR30LN, MCP39PAR30LN/U/
Input Power 45W
Input Current
0.12A @ 347V
70PAR30L, CDM70/PAR30L/M/
70PAR30L, CMH70PAR30L/
70PAR30LN, MCP70PAR30LN/U/
70PAR38, CDM70/PAR38/
70PAR38, CMH70PAR38/
70PAR38, MCP70PAR38/U/
Input Power 80W
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Input Current
0.31A @ 347V
Input Current
0.23A @ 347V
ORDERING INFORMATION
SAMPLE NUMBER: PD6P70E 60V1GC
O r d e r h o u s i n g , r e fl e c t o r a n d l a m p s e p a r a t e l y f o r a c o m p l e t e l u m i n a i r e .
Housing
PD6P = 6 Inch vertical E26
(protected) PAR metal halide
PD6CPP = 6 Inch vertical E26
(protected) PAR metal halide,
CCEA listed (Chicago Plenum)
Wattage / Ballast Option
39E = 39W MH, M130, 120V/277V
393E = 39W MH, M130, 347V
70E = 70W MH, M98, M139, 120V/277V
703E = 70W MH, M98, M139, 347V
100E = 100W MH, M90, M140, 120V/277V
1003E = 100W MH, M90, M140, 347V
www.cooperlighting.com
Reflector
60V = 6” vertical
Lens Option
1G=Prismatic Glass
2G=Diffuse Glass
3G=Clear Glass
4G=Fresnel Glass
Finish Option
C=Specular Clear
G=Specular Gold
H=Semi Specular Clear
W=White (White Flange)
BB=Black Baffle (White Flange)
WB=White Baffle (White Flange)
Polymer “Dead Front” Trim 1
1GDF=Prismatic Glass with “Dead Front” Trim
2GDF=Diffuse Glass with “Dead Front” Trim
3GDF=Clear Glass with “Dead Front” Trim
4GDF=Fresnel Glass with “Dead Front” Trim
5GDF=Drop Opal Glass with “Dead Front” Trim
Flange Option
Blank=Polished Flange
(C, G, H)
Blank=White flange
(W, BB, WB)
WF=White Flange
(C, G, H)
Accessories
HB128APK = L channel hanger bar,
26”, ‘No-Fuss’,
pair (replacement)
RMB22 = 22” long wood joist
mounting bars
Note:
1 “DF” trim option includes Specular Clear (C) reflector and
white polymer flange only.
No other finish or flange options apply.
HALO Commercial
PD6P39E
PD6P70E
P D 6 P 10 0 E
60V
P H OTO M E T RY
PD6P100E-60V1GC_100PAR38
Candela Distribution
Spacing Criteria = 0.96
Lumens per Watt = 55 LpW
Test No. P21695
Test Model: PD6P100E-60V1GC_100PAR38
Candlepower Distribution Curve
90°
80°
70°
60°
50°
40°
30°
0°
10°
20°
Luminance
Degrees
Vertical
Candela
0*
4085
5
3958
15
3389
25
35
(Average Candela/M2)
Cone of Light Footcandles
Avg. 0°
Luminance
Distance to
Illuminated
Plane
Initial Nadir
Footcandles
45
70496
5.5'
55
32288
7'
2781
65
8933
2154
75
612
45
1229
85
153
55
495
65
114
75
6
85
1
90
0
Degree
Beam (ft.)
L
W
Length
Width
135
5.2
5.2
83
6.6
6.6
8'
64
7.6
7.6
9'
50
8.5
8.5
10'
41
9.5
9.5
12'
28
11.4
11.4
14'
21
13.3
13.3
Beam diameter is to 50% of maximum footcandles, rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate light loss factors where necessary.
Zonal Lumen Summary
*CBCP
Zone
Lumens
% Lamp
% Fixture
0-30
2603.3
40.10
47.60
0-40
3934.47
60.50
72.00
0-60
5336.03
82.10
97.60
0-90
5468.33
84.10
100.00
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
www.cooperlighting.com
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049