DESCRIPTION
4” square recessed trimless fixed downlight fixture with cone reflector. For use with CMH
MR16 lamp 20W or 39W.
For use in downlighting / accent applications.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A....Housing
18 gauge CRS with flat black powder
coat. Removable housing top with toolless
access (new construction housing only).
Adjustable square trimless mud-ring can
accommodate 1/2”, 5/8”, 3/4” & 1” ceiling
thickness.
Ceiling mudding compound is applied
right to the edge of the fixture.
B....System Protection:
2.25”
Thermally protected. Vent holes in housing.
QUIET CEILING
TRIMLESS
C....Electrical
J-box and electronic metal halide ballast.
120V or 277V input, Junction box is rated
for through branch wiring. Includes six 1/2
trade size knockouts.
1.69”
4.00”
D....Mounting
QCT2685
Butterfly Brackets and GOT NAIL hanger
bars included. Perforated flaps for
secure drywall installation.
4” Square Trimless
Recessed Downlight
w/ Cone Reflector
E....Trimless Fixture
Square fixed downlight trimless fixture.
Includes bullet plunger retainers for
smooth snap-in action. Finished in a variety
of powder coat paint colors. All internal
components of trim assembly are finished
in matte black. Includes steel safety cable.
FOR CMH MR16
12.00”
to
24.00”
F....Lamp
For use with CMH MR16 metal halide
lamp in 20W or 39W. Lamp not included.
Includes clear protective glass lens. Can
accept up to two (2) optical accessories.
Metal Halide 20W or 39W
7.25”
11.29”
Ceiling
Cut-Out
5.50”sq.
9.75”
G....Reflector
Precision formed aluminum, anodized
finish, integral reflector available in a variety
of colors and tints.
5.42”
Available Housings:
New Construction Housing (Shown)
QCT901 (L=17.19” H=5.38” W=11.29”)
17.19”
9.09 ”
Remodel Housing
QCT913 (L=16.81” H=7.00” W=9.50”)
Special Ceiling Housing
QCT907 (L=17.19” H=5.38” W=11.29”)
5.38 ”
0.5” - 1.0”
4.00”
Suitable for Damp Location
TRIM ORDERING INFORMATION
HOUSING ORDERING INFORMATION
QCT2685
Fixture
QCT2685 =
4” Square Trimless
Fixed Downlight Fixture
Cone Reflector
www.cooperlighting.com
QCT901
Trim Face Finish
WH = White
BK = Black
SN = Satin Nickel
SS = Stainless Steel (paint)
PM = Primer
Reflector
BH = Black Haze
G = Gold
GPH = Graphite Haze
W = Gloss White
H = Haze
KH = Cognac Haze
LI = Low Iridescent
WMH = Warm Haze
WH = Wheat
MW = Matte White
Accessory
LNBLVR = Hex Cell Louver
LNBDSL = Diffusion Spread Lens
LNBLSL = Linear Spread Lens
LNBPSL = Prismatic Spread Lens
LNBUVF = U.V. Filter
Fixture
QCT901 = New Const.
Power Supply
E = Electronic Metal
Halide Ballast
Lamp Type / Wattage
020C16 = 20 Watt CMH MR16
039C16 = 39 Watt CMH MR16
Primary Voltage
1 = 120V
2 = 277V
Other Housings:
QCT913 = Remodel
QCT907 = Special Ceil.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev. 032309