DESCRIPTION
4” square recessed trimless adjustable fixture. For use with PAR20 metal halide lamp 20W or 39W.
Catalog #
Type
Project
For use in downlighting / accent applications.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A....Housing
18 gauge CRS with flat black powder coat.
Adjustable square trimless mud-ring can
accommodate 1/2”, 5/8”, 3/4” & 1” ceiling
thickness.
0º - 35º
B....System Protection:
Ceiling mudding compound is applied
right to the edge of the fixture.
Thermally protected.
C....Electrical
J-box and electronic metal halide ballast.
120V or 277V input, Junction box is rated
for through branch wiring. Includes six 1/2
trade size knockouts.
QUIET CEILING
TRIMLESS
90º Rotation
D....Mounting
2.00"
Butterfly Brackets and GOT NAIL hanger
bars included. Perforated flaps for
secure drywall installation.
QCT2376
4” Square Recessed
Adjustable Trimless
Fixture
2.18"
E....Trimless Fixture
4.00"
Square adjustable trimless fixture. Includes
bullet plunger retainers for smooth snap-in
action. Finished in a variety of powder coat
paint colors. All internal components of
trim assembly are finished in matte black.
Includes steel safety cable.
FOR PAR20 Metal Halide
F....Lamp
12.00” - 24.00”
G....Adjustment
Lamp 20W or 39W
1.69” Square Openng
For use with PAR20 metal halide lamp in
20W or 39W. Lamp sold separately. Can
accept up to two (2) optical accessories.
Lamp adjusts from 0º to 35º tilt. Tilt angle
position indicators on the mechanism.
Locking rotation platform enables lamp
to rotate up to 45º on the vertical axis for
added adjustability and the illumination of
corners.
Ceiling
Cut-Out
5.50”sq.
10.20”
Available Housings:
5.89”
New Construction Housing (Shown)
QCT909 (L=21.70” H=7.20” W=10.20”)
14.20”
Remodel Housing
QCT913 (L=16.81” H=7.00” W=9.50”)
Special Ceiling Housing
QCT911 (L=21.70” H=7.20” W=10.20”)
7.00”
0.5” - 1.0”
4.00”
21.70”
Suitable for Damp Location
TRIM ORDERING INFORMATION
HOUSING ORDERING INFORMATION
QCT2376
Fixture
QCT2376 =
4” Square Trimless
Adjustable
www.cooperlighting.com
QCT909
Trim Face Finish
WH = White
BK = Black
SN = Satin Nickel
SS = Stainless Steel (paint)
PM = Primer
Accessory
LNCLVR = Hex Cell Louver
LNCDSL = Diffusion Spread Lens
LNCLSL = Linear Spread Lens
LNCPSL = Prismatic Spread Lens
LNCUVF = U.V. Filter
Fixture
QCT909 = New Const.
Power Supply
E = Electronic Metal
Halide Ballast
Lamp Type / Wattage
020M20 = 20 Watt PAR20MH
039M20 = 39 Watt PAR20MH
Primary Voltage
1 = 120V
2 = 277V
Other Housings:
QCT913 = Remodel
QCT911 = Special Ceil.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev. 052509