Application
Multi lamp accent fixtures are designed to congregate multiple adjustable fixtures in a
single recessed housing to offer versatility in a single location light source. These
fixtures offer the same flexibility associated with track fixtures while maintaining a
contemporary ceiling appearance. Designed for indoor environments these fixtures are
ETL listed for damp locations.
PRODUCT DATA
HOUSING: Formed heavy gauge steel rough-in mounting frame with plaster flange,
SERIES HDT4-NF Flangeless Recessed
1, 2 or 3 Lamp T4 Metal Halide Adjustable Accent
adjustable hanger brackets and prewired junction box accepts modular fixture housing
from below the ceiling and is painted matte black or white powdercoat finish. Perforated
plate provides for trimless installation in drywall and plaster ceilings. Joint compound
is applied up to edge of fixture opening.
FIXTURES: Diecast aluminum fixture housing allows front loading of lamp and
accessories. Flexible aiming is provided with 358° rotation and 81° vertical adjustment.
Each fixture also telescopes 2" below ceiling line. Models are available that offer one, two
or three adjustable fixtures.
Mounting: Adjustable height “C” channel mounting brackets allow off center
installation and accept a wide variety of hanger bars, (see optional accessories).
ELECTRONIC BALLAST: Solid state electronic ballast is thermally protected and
accessible through aperture opening. Inline quick connectors facilitate installation and
maintenance from below the fixture.
ELECTRICAL: Universal voltage, 120/277 volt input. Wiring compartment provided
with multiple conduit knockouts for through branch wiring.
SOCKET: 4 KV rated G8.5 Bi Pin socket.
Available in one, two and three lamp models.
LAMP DATA: T4 ceramic metal halide, (by others).
2HD(Double Head Model)
3HD(Triple Head Model)
B. Overall Length
Rough Open
7.34" x 7.84"
7.34" x 15.6"
7.34" x 15.6"
C. Overall Width
7.33"
A. Aperture
FOR DAMP
LOCATION
Individually adjustable
lighting heads rotate,
pivot and retract or
extend for a variety
of aiming positions.
Manufactured and tested to UL#1598 and CSA standards.
Note: Suitable for damp location.
Fixtures are not designed for direct contact with insulation.
Catalog Number –
2HDT4___________________________________________________________
Example: 2HDT439SNFWW
Fixture Series
Lamp/Wattage
Type/Voltage
Beam Distribution
Trim Style
HDT4 (1 lamp)
2HDT4 (2 lamp)
3HDT4 (3 lamp)
70
39
20
120/277 Volt
Standard
Electronic
S –Spot (15°)
M–Medium (30°)
W–Wide (60°)
NF–Flangeless
Housing Interior
W – White
C – Charcoal Grey
B – Black
Optional Accessories
Options
Hanger Bars (set of 2): #101782= #520 Caddy Bars
9152 = 52" C-Channel
#9127 = 27" C-Channel
27BH = 27" Solid Bar
#24CBH = 24" one-piece B-Line C-Channel hanger bar
# – F = Fuse and Fuse Holder
Fixture Type
Job Reference/Location
Lamp Type
Approval
Fixture Color W – White
C – Charcoal Grey
B – Black
All Pathway® products meet or exceed requirements as established by the
National Electrical Code. Specifications subject to change without notice.
Alzak® is a registered trademark of Alcoa.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
SERIES HDT4-NF - Flangeless Recessed 1, 2 or 3 Lamp T4 Metal Halide Adjustable Accent
A. Aperture B. Overall Length C. Overall Width
6.33" x 6.77"
18.54"
11.53"
6.33" x 14.52"
19.26"
11.53"
6.33" x 20.52"
25.26"
11.53"
HD (Single Head Model)
MA5.5
UMMBCD