674 Series Interior Wall Luminaire
shaperlighting.com
Des c r iption
674 Luminous Wall Sconce features horizontal trim bars with a vertical fin
detail and is ADA compliant. Design options, such as perforated metal,
colored acrylic, and different trim bar configurations are available.
- Painted, natural or plated solid aluminum frame
- Integral electronic HPF, multi-volt 120/277V (347V Canada-except 13W)
- Standard: Natural Aluminum; Premium: Contact factory for finishes
- Universal circular strap for a standard 4" J-box or plaster ring"
- Open top and bottom with a regressed aluminum perf shield
- UL and CUL approved for interior and damp locations, ADA compliant
Type
Catalog #
Project
Date
Comments
Prepared by
Spe c ific a tion F ea t u r e s
Material
L ED
Painted, natural or plated solid
aluminum with a 1/8” matte white
acrylic panel. Open top and bottom
with a regressed aluminum perf
shield.
31” L3:2000 nominal lumens at
max 19W
43” L4:3000 nominal lumens at
max 28W
55” L5:4000 nominal lumens at
max 37W
Finish
Standard: Natural Aluminum (NA)
[Sustainable Design].
Premium: Aluminum Paint (ALP),
Bronze Metallic Paint (BM), Gold
Metallic Paint (GM), Dark Platinum
Paint (DP), Graphite Metallic Paint
(GRM), Gun Metal (GNM), Matte
White (MW), Lacquered Satin
Aluminum (SAL), Polished Brass
(PB), Satin Brass (SB), Oxidized
Brass (OBRS), Satin Copper (SCP),
Polished Copper (PCP), Oxidized
Copper (OCP), Satin Nickel (SN),
Polished Nickel (PN) or Custom
Color (CC).
Optics
Refer to www.shaperlighting.com
for complete photometrics.
B all a s t
Integral electronic HPF, multi-volt
120/277V (347V Canada), thermally
protected with end-of-life circuitry
to accommodate the specified
lamp wattage.
Lam p i n g O p t i o n s
Li n e a r
31”: Two (2) 14W T5 linear
miniature bi-pin fluorescent lamps.
43”: Two (2) 21W T5 linear
miniature bi-pin fluorescent lamps.
55”: Two (2) 28W T5 linear
miniature bi-pin fluorescent lamps.
Fluorescent socket injection
molded plastic. Lamps furnished
by others.
Long-life LED system coupled with
electrical driver to deliver optimal
performance. Electronic drivers are
available for 120-277 applications.
A 0-10V dimming control is
available (Standard) on all models.
In sta lla tio n
Supplied with a universal circular
strap for a standard 4” J-box or
plaster ring. Shaper luminaires are
designed for interior installations
only.
that have more than average
moisture (i.e. bathroom, laundry
room, etc.) but are not UL listed
for pool, sauna, shower, whirlpool
and any exterior applications
(i.e. covered garage or building
entrance) with exposure to weather
elements such as rain, wind, etc.
ADA compliant.
Modifications
Shaper’s skilled craftspeople with
their depth of experience offer
the designer the flexibility to
modify standard wall luminaires
for project specific solutions.
Contact the factory regarding scale
options, unique finishes, mounting,
additional materials/colors, or
decorative detailing.
674 Series
Interior Wall Luminaire
Luminous Sconce
Op tio n s
Hand-Painted Faux Alabaster
Acrylic Diffuser (FD), Hand-Painted
Faux Linen Alabaster Diffuser
(LND), Dimming Ballast: Advance
Mark 7 (DMA7), Mark 10 (DMA10)
- Available in 43” & 55” or Lutron
(DML). Modified Length - Contact
factory, Alternative Trim Bars
or Perf Accent Design - Contact
factory, Damp Location (DL): All
painted finishes only, “Green
Glass” Acrylic (GGA), Integrated
Emergency Ballast (IEM) - 55” only,
REM - Remote Emergency Ballast.
Energy Star Rating - Contact
factory.
L a b e ls
U.L. and C.U.L approved for
indoor and damp location. See
options for damp location finishing
requirements. Shaper’s DL option
is for interior applications (only)
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ARRA
Shaper Lighting certifies that its products
satisfy the requirements of Section 1605 of
the American Recovery and Reinvestment
Act (also known as the ARRA Buy American
provision).
AMERICAN DISABILITIES
ACT (ADA)
Shaper offers a large selection of ADA
interior and exterior wall luminaires.
ADA requires all fixtures below 68" to
have a maximum projection of 4".
SUSTAINABLE
DESIGN
Shaper has a long-standing history of
offering environmentally-friendly fixtures.
The copper and bronze alloys used in our
exterior luminaires feature up to 98%
recycled content, contribute less
undesirable air emissions compared to
painted aluminum and are easy to recycle.
ADS042689
2014-05-07 15:51:21
674 Series Interior Wall Luminaire
shaperlighting.com
D imens ions
4”
8-3/8”
8-3/8”
674-31”
53” (134.6 cm)
49” (124.4 cm)
41” (104.1 cm)
37” (94 cm)
55” (139.7 cm)
4”
(10.1 cm)
43” (109.2 cm)
25” (63.5 cm)
31” (78.7 cm)
29” (73.6 cm)
8-3/8”
(21.2 cm)
4”
674-43”
674-55”
4”
3/4”
(2 cm)
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS042689
2014-05-07 15:51:21
674 Series Interior Wall Luminaire
shaperlighting.com
Order ing I nfor m a tion
Sample Number: 674-55-W-T5/2/28-277V-GRM-FD-DMA7
Series
674=Interior
Luminous
Wall Sconce
Size
31=31”
43=43”
55=55”
Mounting
Type
W=Wall
LED Size
31=31”
43=43”
55=55”
Lamp
Voltage
1
T5/2/14
T5/2/21 2
3
T5/2/28
LED Lamp
L3/827 1
L4/827 2
L5/827 3
L3/830 1
L4/830 2
L5/830 3
L3/835 1
L4/835 2
L5/835 3
L3/840 1
2
L4/840
3
L5/840
120V
277V
347V
UNV
(120-277V)
Finish
Standard
Options
4
NA = Natural Aluminum
DL= Damp Location
BM = Bronze Metallic Paint
ALP = AluminumPaint
DMA7 =Dimming Ballast
(Advance Mark 7)
Premium
CC= Custom Color
DP = Dark Platinum Paint
2, 3
DMA10 =Dimming Ballast
2, 3
(Advance Mark 10)
GM = Gold Metallic Paint
GMN = Gun Metal
DML = Dimming Ballast
(Lutron)
GRM = Graphite Metallic Paint
GY = Grey
GGA =Green Glass Acrylic
MW = Matte White
OBRS = Oxidized Brass
OCP = Oxidized Copper
PB = Polished Brass
PCP= Polished Copper
PN = Polished Nickel
SAL = Lacquered Satin Aluminum
SB = Satin Brass
IEM =Integral Emergency
Ballast or Driver 2, 3
REM =Remote Emergency
Ballast or Driver 5
FD =Hand Painted Faux
Alabaster Diffuser
LND =Hand Painted Faux
Linen Diffuser
6
DSLT = Dali Fifth Light Dimming
SCP= Satin Copper
SN = Satin Nickel
Notes:
1
Available in 31" only.
2
Available in 43" only.
3
Available in 55" only.
4
Interior applications only.
5
Supplied by others.
6
7
For T5 Lamping Options Only
Only available in 55” size
LED Lamp:
L3-2000 nominal lumens at max 19W
L4-3000 nominal lumens at max 28W
L5-4000 nominal lumens at max 37 W
Companion P r od uc ts
673
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS042689
2014-05-07 15:51:21