Metalux

advertisement
Metalux
D ES C R IPTION
The BI Series fills the need for a very low brightness wall bracket. This
specification grade wall bracket with an injection molded refractor
produces effective up, down or combination lighting. This energy
efficient luminaire offers up lighting, multi-level switching and
convenience outlets as options. These design features ensure that the BI
Series will offer ease of use and comfort.
The BI Series features specification efficiency in a low profile wall
bracket. The Series is an excellent choice for dressing rooms, lavatories,
hospital and nursing homes, stairways and task lighting.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
F in ish
Frame/Shielding
Housing die formed code gauge
cold rolled steel. Channel cover
secured by quarter-turn fasteners
for easy wiring. Up, down or
combination lighting with 3 and 4
foot fixtures. Decorative opaque
injection molded end plates.
Painted after fabrication.
Electrostatically applied baked
white polyester powder enamel
finish. Multistage cleaning cycle,
iron phosphate coating with
rust inhibitor. Conveyorized
application and baking timing
accurately controlled at an elevated
temperature.
Injection molded 100% virgin
acrylic diffuser and end cap.
Quadrasided diffuser prism shapes
accurately molded for optimum
light brightness control. Diffuser
slides forward for easy installation
and maintenance. Uplight diffuser
prismatic acrylic.
El e c t r i c a l
Ballast are CBM/ETL Class “P” and
positively secured by mounting
bolts. Pressure lock lampholders.
UL/CUL listed. Suitable for damp
locations.
BI, BIU
120, 117, 130
125, 140, 132
220, 217, 230
225, 240
232
3-1/2"
[89mm]
2', 3' OR 4' WALL BRACKET
1 OR 2 LAMP
7-1/2" [190mm]
Commercial Plus Wall
Bracket
MOUNTING D A TA
1"
[25mm]
3-1/2"
[89mm]
Ceiling Stand-Off
Ground Screw Bump
Embossments
7/8" K.O. (1)
1-3/4"
Keyhole
[44mm]
3-1/2"
[89mm]
5-7/8"
[149mm]
16" [406mm]
24-3/4" [629mm]
X=3-1/2"
[89mm]
1"
[25mm]
X
7-1/2"
[190mm]
X=3-1/2"
[89mm]
1-3/4"
[44mm]
Keyhole
7-1/2"
[190mm]
7/8" [22mm] K.O. (3)
Ceiling Stand-Off
Embossments
X=3-1/2"
[89mm]
X
7-1/2"
[190mm]
X=3-1/2"
[89mm]
7-1/2"
[190mm]
Input Watts:
EB Ballast & STD Lamps
117 (20), 130 (31), 125 (28), 140 (38),
132 (30), 217 (36), 230 (60), 225 (47),
240 (72), 232 (61)
Ground Screw Bump
Keyhole
3-1/2"
[89mm]
32" [813mm]
40-5/8" [1032mm]
48-3/4" [1238mm]
X
ENERGY DATA
32" [813mm]
36-3/4" [933mm]
L AM P C ONFIGUR A T I O N S
X
7/8" K.O. (1)
Ground Screw Bump
Stand-Off Embossments
1"
[25mm]
1-3/4"
[44mm]
ES Ballast & STD Lamps
120 (32), 117 (23), 130 (46), 125 (33),
140 (38), 132 (30), 220 (58), 217 (45),
230 (74), 225 (65), 240 (86), 232 (71)
Luminaire Efficacy Rating
LER = FL-67
Catalog Number: BI-232A
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $3.58
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
ADF020687
2016-01-06 13:56:25
B I, B IU
PH OTOM ETR IC S
Energy Saving Ballast, F32T8/35K lamps rated at 2850 lumens.
Spacing criterion: (II)1.6 x mounting height, (⊥)1.3 x mounting
height.
Light Loss Factor .74. For complete photometric report request
report BI232.IES
BI-232A
Lamps
(2) F32T8/35K
Lumens 2850 Each
Conditions
3'-0"
Room Size
12’ Width x
14’ Length
Ceiling Height 9’-0”
6'-0"
68.5
Ceiling
80%
Walls
50%
Floor
84.0
53.2
Reflectance
83.9
92.0
31.9
20%
53.0
31.8
18.5
5'
12.3
8.9
9.2
9.4
9.2
7.0
4'
13.1
13.6
13.1
8.9
3'
20.8
22.1
20.8
12.3
2'
37.5
40.7
37.5
18.6
1'
64.0
69.9
64.1
68.3
7.1
7.2
7.2
6'
7.0
7'
CL
9"
3'-0"
12"
Scale is Exaggerated on Fixture
Application and Mounting
ORDER IN G INFOR M A TION
SAMPLE NUMBER: BI-232-120V-EB81-U
Series
BI=Steel Wall Bracket
Downlight only
BIU=Steel Wall Bracket
(Up and Down Light)
Ballast Start Type
LTS=Low Trigger Start
(20 Watt only) (120V only)
HTS=High Trigger Start
(20 Watt only)
Number of Lamps
1=1 Lamp (Not Included)
2=2 Lamps (Not Included)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
Wattage
20=20W T12 (24")
17=17W T8 (24")
25=25W T8 (36")
30=30W T12 (36")
32=32W T8 (48")
40=40W T12 (48")
Options
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed
Ballast Type (1)
Blank=Standard Magnetic T12 Ballast
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13.
No. of
Total Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
Packaging
U=Unit Pack
Options
2/1 LB=(2) One-Lamp Ballasts (When
RS4 or PS4 option is used)
BH=Matte Black Finish (Lens Housing)
CO=Convenience Outlet (120V only)
PS1=Pull Switch (1 circuit)
PS1D=Pull Switch, wired to the
downlight circuit on a two circuit fixture
(120V only)
RS4=Four-way rotary switch, for two
circuit, two lamp fixture, (120V Only)(1)
PS4=Four-way pull switch, for two circuit,
two lamp fixture (120V only)
PL5 or PL7=Fluorescent Night Light (5 or
7 Watt) Only available in fixtures
without a baffle
RLS=Rotor-Lock Socket (T8 Lamp Only)
((1)
NOTES: Products also available in non-US voltages and frequencies for international markets.
(2)
Not available when specifying emergencies, voltage must be specific.
Specifications & dimensions subject to change without notice. Consult your Eaton
Representative for availability and ordering information.
SH IP P ING D A T A
Catalog No.
BI-117
BI-125
BI-132
BIU-117
BIU-125
BIU-132
BI-217
BI-225
BI-232
BIU-217
BIU-225
BIU-232
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Wt.
8 lbs.
11 lbs.
14 lbs.
8 lbs.
11 lbs.
14 lbs.
8 lbs.
11 lbs.
14 lbs.
8 lbs.
11 lbs.
14 lbs.
ADF020687
2016-01-06 13:56:25
Download