Switch & Outlet Boxes – Technical Data
General Information:
A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked “FOR FIXTURE/
LUMINAIRE SUPPORT” on the carton to indicate that the box is intended for fixture/luminaire support. A box, with or without a bracket or
bar hanger, intended for support of a fixture/luminaire weighing more than 50 lbs. is marked with the weight of the fixture/luminaire to be
supported. Metallic device boxes and device plaster rings have not been investigated for support of a ceiling fixture/luminaire unless marked
for use in ceilings, walls and with the weight of the product to be supported. Metallic device boxes intended to be installed in an existing
structure have been investigated for the support of utilization equipment weighing not more than 6 lbs.
Article 314 of the National Electrical Code® (NEC®) covers the installation and use of boxes. The article includes table references that guide the
electrician in the selection of the proper size box necessary to safely accommodate electrical service requirements. The box capacity table is
reproduced in part from NEC as a quick reference and guide. The NEC should be consulted for complete details.
Eaton’s Crouse-Hinds Series products are produced in accordance with the requirements of UL514A, UL514B and UL514C, and are classified
for fire resistance according to the standard, Fire Tests of Building Construction and Materials, ANSI/UL263, ASTM E 119 and NFPA 251. This
listing is based on products when used in a fire rated (2 HR) wall or ceiling. Eaton’s Crouse-Hinds Series steel boxes are listed with UL File
No. E-23156 and Eaton’s Crouse-Hinds Series non-metallic boxes are listed with UL File No. E-102328 and UL (2 HR fire rated) File No. R9933.
Eaton’s Crouse-Hinds Series switch and outlet boxes comply with the requirements of NEMA Standard OS-1, NFPA 70-370 and Federal Spec.
#W-J-800E.
Under File No. E-23156, Eaton’s Crouse-Hinds Series concentric and “moon” KO style boxes, the following is stated “Suitable for bonding
without any additional bonding means around concentric (or eccentric) knockouts where used in circuits above or below 250V.”
Wall thickness on all steel boxes is 0.0625” with minimum galvanization thickness of G60.
Table 314.16(A) Metal Boxes
Min.
Outlet Boxes
Box Dimension (In.)
Maximum Number of Conductors (arranged by AWG size)
Cu. In.
Trade Size or Type
Cap.
No. 18
No. 16
No. 14
No. 12
No. 10
No. 8
No. 6
4 x 11/4 Round or Octagonal
4 x 11/2 Round or Octagonal
4 x 21/8 Round or Octagonal
4 x 11/4 Square
4 x 11/2 Square
4 x 21/8 Square
411/16 x 11/4 Square
411/16 x 21/2 Square
411/16 x 21/8 Square
3 x 2 x 11/2 Device
3 x 2 x 2 Device
3 x 2 x 21/4 Device
3 x 2 x 21/2 Device
3 x 2 x 23/4 Device
3 x 2 x 31/2 Device
4 x 21/8 x 11/2 Device
4 x 21/8 x 17/8 Device
4 x 21/8 x 21/8 Device
33/4 x 2 x 21/2 Masonry Box/Gang
33/4 x 2 x 31/2 Masonry Box/Gang
FS-Minimum Internal Depth 13/4 Single Cover Gang
FD-Minimum Internal Depth 23/8 Single Cover Gang
FS-Minimum Internal Depth 13/4 Multiple Cover Gang
FD-Minimum Internal Depth 23/8 Multiple Cover Gang
12.5
15.5
21.5
18.0
21.0
30.3
25.5
29.5
42.0
7.5
10.0
10.5
12.5
14.0
18.0
10.3
13.0
14.5
14.0
21.0
13.5
18.0
18.0
24.0
8
10
14
12
14
20
17
19
28
5
6
7
8
9
12
6
8
9
9
14
9
12
12
16
7
8
12
10
12
17
14
16
24
4
5
6
7
8
10
5
7
8
8
12
7
10
10
13
6
7
10
9
10
15
12
14
21
3
5
5
6
7
9
5
6
7
7
10
6
9
9
12
5
6
9
8
9
13
11
13
18
3
4
4
5
6
8
4
5
6
6
9
6
8
8
10
5
6
8
7
8
12
10
11
16
3
4
4
5
5
7
4
5
5
5
8
5
7
7
9
4
5
7
6
7
10
8
9
14
2
3
3
4
4
6
3
4
4
4
7
4
6
6
8
2
3
4
3
4
6
5
5
8
1
2
2
2
2
3
2
2
2
2
4
2
3
3
4
Table 314.16(B) Volume Required per Conductor
Size of Conductor
Free Space Within Box for Each
Conductor
No.
No.
No.
No.
No.
No.
No.
1.5 cubic inches
1.75 cubic inches
2 cubic inches
2.25 cubic inches
2.5 cubic inches
3 cubic inches
5 cubic inches
18
16
14
12
10
8
6
For SI units: one cubic inch = 16.4 cm3.
Reprinted with permission from NFPA 70-2005, the National Electrical Code®, Copyright® 2005 National Fire Protection Association, Quincy MA 02269. This reprinted material is not the
complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety. National Electrical Code® and
NEC® are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02269.
172
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Switch & Outlet Boxes – Technical Data
OUTLET BOXES & COVERS
Eaton’s Crouse-Hinds Division has assembled one of the most complete outlet box product lines in the business. We’ve been leading
in quality and selection for decades, and throughout the steel outlet box offering, you will find innovative products and solutions
that save labor, cut material costs and increase productivity.
We have a complete offering of:
twBOE11/ 16” square drawn and welded boxes
twTRVBSFBOE11/ 16”, switch, masonry, utility, outlet, ceiling, fan and gangable boxes
t%SBXOCPYFTBWBJMBCMFXJUIDPODFOUSJDLOPDLPVUTDPNCJOJOH1/ 2” and 3/ 4” knockout
t$PNQMFUFMJOFPGDPWFSTQBSUJUJPOTFYUFOTJPOSJOHTBOEBDDFTTPSJFT
t6OJ.PVOU™ covers
t13&GPSNBODF™ products
t1SFBTTFNCMFECPYFTXIJDIJODMVEFT6OJ.PVOUDPWFSBUUBDIFEUPwTRVBSFCPY
t1SFGBCSJDBUFECPYFTXIJDIJODMVEFT6OJ.PVOUDPWFSBUUBDIFEUPwTRVBSFCPYXJUI
ground screw and lead installed
t'JSFBMBSNCPYFTBOEDPWFST
Standard Materials – Steel Covers, Outlet and Switch Boxes:
tø4UFFMCPYFTBOEDPWFSTBSFNBEFPGJODIUIJDLQSFHBMWBOJ[FETIFFUTUFFM
t)BOEZCPYDPWFSTBSFNBEFPGJODIUIJDLHBMWBOJ[FETIFFUTUFFM
BRACKETS USED ON BOXES
“F” BRACKET
“D” BRACKET
“VS” BRACKET
“S” BRACKET
“C” BRACKET
Side mount brackets with set up
hook for wood or metal studs.
Standard bracket set back is 5/ 8”.
Ceiling box bracket for wood
studs.
“VMS” BRACKET
“VP” BRACKET
Plain flat mounted bracket for use Side bracket for use with wood or Side bracket with set up hooks for
on wood or metal studs. No set metal studs. Provides set up tabs
wood studs.
back.
to position on face of stud.
Outlet Boxes
Mounts on face of stud. See
Side mount bracket with set up
catalog number for set back. For hook and guide tabs for automatic
wood studs.
positioning. Standard bracket set
back is 5/ 8”. For wood and metal
studs.
“SSB” BRACKET
Positions box on either side of a
steel stud.
“MSB” BRACKET
Position box on either side of
steel stud.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
173
Switch & Outlet Boxes – Technical Data
CLAMPS USED ON BOXES
Cat. # TP900
MC-BX
FOR ARMOURED & METALCLAD (MCI) CABLE
NM-1
NM-2
FOR NON-METALLIC CABLE
NM-4
MOUNTING EARS
Cat. # TP901
Cat. # TP902
ONE SCREW EAR
TWO SCREW EAR
Mounting ears are available on many of our switch boxes. They are set forward in 1/16” the “old way” position. Two screw ears are
generally used on shallow boxes and one screw ears on deep boxes.
Outlet Boxes
BOX ENTRY DETAILS
/2” Conduit KO
1
/4” Conduit KO
3
1” Conduit KO
Concentric 1/2” and 3/4” KO
Eccentric 1/2” and 3/4” KO
Cable Pry-outs Always in Pairs
Knockouts and Pry-outs
Conduit KOs have standard trade size dimensions. KOs are uniform and true for attachment of cable or conduit connectors. Pry-outs for cable
entrance are slotted – a twist with screwdriver removes them. KOs and pry-outs are precision stamped to permit easy removal, but remain
sufficiently strong and sturdy when not removed.
4” square drawn boxes feature a 1/ 2” and 3/ 4” “inverted” concentric KO – easily removed. Our 4” square welded boxes feature our 1/ 2”
eccentric KO which also features easy removability of both the 1/ 2” and 3/ 4” KOs.
Note: These KOs are suitable for bonding without bonding jumpers around concentric (or eccentric) knockouts where used in circuits above or below 250V.
174
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Boxes
4” SQUARE OUTLET BOXES & COVERS
Applications:
tø'PSVTFXJUIDPOEVJU
t"WBJMBCMFJOSFEGPSGJSFBMBSNBQQMJDBUJPOT
Features:
tø*EFBMGPSFYQPTFEXPSLBQQMJDBUJPOTQSPWJEJOHBOFBTZNFUIPEGPS
the installation of electrical devices (switches, receptacles, fans,
lights, etc.)
t3BJTFEHSPVOETDSFXMPDBUJPOJOUIFXFMEFECPYFTTBWFTUJNFJO
installation
t"WBJMBCMFXJUIQSFJOTUBMMFEHSPVOETDSFXTBOEQJHUBJMTGPS
increased labor savings
t,OPDLPVUTBSFTVJUBCMFGPSVTFXJUIPVUBCPOEJOHKVNQFSJODJSDVJUT
above or below 250 volts
t"WBJMBCMFJOUXPEFQUITGPSEJGGFSJOHDVCJDDBQBDJUZSFRVJSFNFOUT
t8FMEFEPSESBXODPOTUSVDUJPOUPNBUDIDVTUPNFSQSFGFSFODF
t&YUFOTJWFDPWFSPGGFSJOHUPNFFUWBSJPVTDVTUPNFSBQQMJDBUJPOTBOE
needs
Certifications and Compliances:
tø6--JTUFE
4” SQUARE OUTLET BOXES – 18.0 CUBIC INCH CAPACITY
11/4” DEEP – FOR CONDUIT
UL LISTED
Steel Boxes
TP408
Knockouts
Cat. #
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP408
-
Drawn
øoø1/2”
øoø1/2”
50
61
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
175
Steel Square Boxes
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY (WELDED)†
21.0 CUBIC INCH CAPACITY (DRAWN)
Steel Boxes
11/ 2” DEEP – FOR CONDUIT
UL LISTED
TP404/TP404PF
TP404SSB
TP404MSB
TP404RED
TP425
TP469
TP830*
TP405
TP412
TP839*
TP410
TP414RED
TP414
TP418
TP423RED
Knockouts
Cat. #
Metal
Stud
Sizes
Bracket
TP404**
TP404MSB
TP404RED
TP404REDMSB
TP404PF‡**
TP404SSB
TP425**
TP423**
TP423RED
TP405
TP410
TP412
TP414
TP414RED
TP418
TP467
TP467MSB
TP469
All
All
All
All
Welded
MSB
Welded
Welded
MSB
Welded
Welded
SSB
Welded
"VP"
Welded
"VMS"
Welded
"VMS"
Welded
Drawn
Drawn
Drawn
Drawn
Drawn
"F", Set Flush Welded
Welded
MSB
Welded
"VMS"
Welded
8 - 1/ 2”, 4 - 1/ 2”
8 - 1/ 2”, 4 - 1/ 2”
8 - 1/ 2”, 4 - 1/ 2”
8 - 1/ 2”, 4 - 1/ 2”
8 - 1/ 2”, 4 - 1/ 2”
8 - 1/ 2”, 4 - 1/ 2”
6 - 1/ 2”, 3 - 1/ 2”
6 - 1/ 2”, 3 - 1/ 2”
6 - 1/ 2”, 3 - 1/ 2”
4 - 1/ 2”, 6 - 1/ 2”
12 - 1/ 2”
8 - 3/ 4”
8 - 1/ 2”, 4 - 3/ 4”
8 - 1/ 2”, 4 - 3/ 4”
6 - 1/ 2”, 3 - 1/ 2”
8 - 3/ 4”
8 - 3/ 4”
6 - 3/ 4”
-
-
8 - 1/ 2”, 4 - 3/ 4”
8 - 3/ 4” C
Description
Sides
Bottom
+
+
+
+
+
+
+
+
+
+
/ 4”
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
3
E
E
E
E
E
E
E
E
E
C
+ 3/ 4” E
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
3 - 1/ 2”,
5 - 1/ 2”
3 - 1/ 2”,
3 - 1/ 2”,
3 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 3/ 4”
2 - 3/ 4”
2 - 3/ 4”
2 - 3/ 4”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
+
+
+
+
+
+
+
+
+
3
/ 4”
/ 4”
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
E
E
E
E
E
E
E
E
E
+
+
+
+
3
/ 4”
/ 4”
3
/ 4”
3
/ 4”
E
E
E
E
3
3
3
Unit
Qty.
Wt. Lbs.
Per 100
50
25
50
25
50
50
25
25
25
50
50
50
50
50
25
50
25
25
72
83
72
83
72
83
82
81
81
67
67
67
67
67
84
72
78
81
50
50
72
72
Air Plenum
TP830*
TP839*
Drawn
Drawn
3 - 1/ 2”, 2 - 3/ 4”
3 - 1/ 2”, 2 - 3/ 4”
*For Air Plenum (no mounting holes) - not UL Listed.
**cUL Listed.
†All welded 4” Square Outlet Boxes have a raised dimple for ground screw.
‡TP404PF includes ground screw with pigtail lead.
176
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2016 Commercial Products Catalog
Steel Square Boxes
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2” DEEP
FOR NON-METALLIC CABLE – CLAMPS IN EACH END
UL LISTED
TP444
TP444MSB
TP449
TP446
Knockouts
Cat. #
Bracket
Description
Sides
TP444
TP444MSB
TP444SSB
TP446
TP449
MSB
SSB
“F”, Set Flush
“VMS”
Welded
Welded
Welded
Welded
Welded
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
4 - 1/2”,
4 - 1/2”,
4 - 1/2”,
2 - 1/2”,
2 - 1/2”,
2 - 1/2”
2 - 1/2”
2 - 1/2”
1 - 1/2”
1 - 1/2”
+
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
/4”
3
3
E
E
E
E
E
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
50
25
50
25
25
77
81
88
88
85
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE & HCF CABLE – CLAMPS IN EACH END
UL LISTED
Steel Boxes
TP454
TP454MSB
TP456
TP459
Knockouts
Cat. #
Bracket
Description
Sides
TP459
TP454*
TP454MSB
TP454PF†
TP454SSB*
TP456*
TP456PF†
“VMS”
MSB
SSB
“F”, Set Flush
“F”, Set Flush
Welded
Welded
Welded
Welded
Welded
Welded
Welded
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
4 - Cable,
2 - 1/2”,
4 - 1/2”,
4 - 1/2”,
4 - 1/2”,
4 - 1/2”,
2 - 1/2”,
2 - 1/2”,
1 - 1/2”
2 - 1/2”
2 - 1/2”
2 - 1/2”
2 - 1/2”
1 - 1/2”
1 - 1/2”
+
+
+
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
/4”
3
/4”
3
/4”
3
3
E
E
E
E
E
E
E
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
1 - 1/2”
25
50
25
50
25
25
25
89
81
91
81
82
92
92
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
†TP catalog numbers ending in PF include ground screw with pigtail lead.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2016 Commercial Products Catalog
177
Steel Square Boxes
4” SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP – FOR CONDUIT
UL LISTED
TP403/TP403PF
TP403SSB
TP403MSB
TP432
TP432VMS
TP434
TP403RED
TP434RED
TP451RED
TP438
TP831*
TP451
Steel Boxes
Knockouts
Cat. #
Bracket
Description
Sides
Bottom
TP403**
TP403MSB
TP403RED
TP403REDMSB
TP403PF†**
TP403SSB
TP432**
TP432MSB
TP432REDMSB
TP432VMS
TP436
TP436MSB
TP434
TP434RED
TP438
TP438PF†
TP451
TP451PF†
TP451RED
TP437
MSB
MSB
SSB
MSB
MSB
“VMS”
MSB
“VMS”
“VMS”
“VMS”
“VP”
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Drawn
Drawn
Drawn
Drawn
Welded
Welded
Welded
Welded
8 - 1/ 2”,
8 - 1/ 2”,
8 - 1/ 2”,
8 - 1/ 2”,
8 - 1/ 2”,
8 - 1/ 2”,
8 - 3/ 4”
8 - 3/ 4”
8 - 3/ 4”
6 - 3/ 4”
8 - 1”
8 - 1”
8 - 1/ 2”,
8 - 1/ 2”,
4 - 1/ 2”,
4 - 1/ 2”,
6 - 1/ 2”,
6 - 1/ 2”,
6 - 1/ 2”,
6 - 1/ 2”,
-
Drawn
8 - 1/ 2”, 4 - 3/ 4”
4 - 1/ 2”
4 - 1/ 2”
4 - 1/ 2”
4 - 1/ 2”
4 - 1/ 2”
4 - 1/ 2”
+
+
+
+
+
+
3
/ 4”
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
E
E
E
E
E
E
4 - 3/ 4”
4 - 3/ 4”
6 - 1/ 2”
6 - 1/ 2”
3 - 1/ 2”
3 - 1/ 2”
3 - 1/ 2”
3 - 1/ 2”
+
+
+
+
+
+
3
/ 4”
/ 4”
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
C
C
E
E
E
E
3
3
3
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
3 - 1/ 2”,
3 - 1/ 2”,
3 - 1/ 2”,
3 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”,
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 3/ 4”
2 - 3/ 4”
2 - 3/ 4”
2 - 3/ 4”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
2 - 1/ 2”
+
+
+
+
+
+
+
+
+
+
+
+
3
/ 4”
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
3
/ 4”
E
E
E
E
E
E
E
E
E
E
E
E
+
+
+
+
3
/ 4”
/ 4”
3
/ 4”
3
/ 4”
E
E
E
E
3
3
Unit
Qty.
Wt. Lbs.
Per 100
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
84
95
84
95
84
95
84
95
95
99
84
95
84
84
84
84
96
96
96
98
25
90
Air Plenum
TP831*
3 - 1/ 2”, 2 - 3/ 4”
*For Air Plenum (no mounting holes) - not UL Listed.
**cUL Listed.
†TP catalog numbers ending in PF include ground screw with pigtail lead.
178
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2016 Commercial Products Catalog
Steel Square Boxes
4” SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP
FOR NON-METALLIC CABLE – CLAMPS IN EACH END
UL LISTED
TP450
TP450MSB
TP450SSB
TP452
Knockouts
Cat. #
Bracket
Description
Sides
TP450
TP450MSB
TP450SSB
TP452
MSB
SSB
“VMS”
Welded
Welded
Welded
Welded
øø$BCMFøø1/2wøø1/2”
øø$BCMFøø1/2wøø1/2”
øø$BCMFøø1/2wøø1/2”
øø$BCMFøø1/2wøø1/2”
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
3
E
E
E
E
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
øø1/2”
øø1/2”
25
25
25
25
90
101
101
104
4” SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE & HCF CABLE – CLAMPS IN EACH END
UL LISTED
Steel Boxes
TP431
TP431MSB
Cat. #
Metal
Stud
Sizes
Bracket
Description
TP431*
TP431PF†
TP431MSB
TP431SSB*
TP440*
All
MSB
SSB
“VMS”
Welded
Welded
Welded
Welded
Welded
TP440
Knockouts
Sides
Bottom
øoø$BCMFøoø1/2wøoø1/2”
øoø$BCMFøoø1/2wøoø1/2”
øoø$BCMFøoø1/2wøoø1/2”
øoø$BCMFøoø1/2wøoø1/2”
øoø$BCMFøoø1/2wøoø1/2”
&
&
&
&
&
/4” E
/4” E
3
/4” E
3
/4” E
3
/4” E
3
3
øoø1/2”
øoø1/2”
øoø1/2”
øoø1/2”
øoø1/2”
Unit
Qty.
Wt. Lbs.
Per 100
25
25
25
25
25
91
91
91
102
103
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
†TP catalog numbers ending in PF include ground screw with pigtail lead.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
179
Steel Square Boxes
4” SQUARE TWO DEVICE BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP – FOR CONDUIT
UL LISTED
TP391
TP395
Knockouts
Cat. #
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP391
TP395
“VS”, Set 7/8”
-
Drawn
Drawn
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
25
25
95
84
4” SQUARE OUTLET BOXES – 46.0 CUBIC INCH CAPACITY
31/2” DEEP – FOR CONDUIT
UL LISTED, FILE NO. E-15022
Applications:
Steel Boxes
tøwTRVBSF1/2” deep outlet boxes are ideal for applications
requiring increased capacity, including the installation of speaker
boxes, fire alarms, strobes, security cameras and other oversized
devices
t'PSVTFXJUISJHJE*.$BOE&.5DPOEVJU
TP411RED
TP411
TP413RED
TP413
Knockouts
Cat. #
Bracket
Description
Sides
TP411
TP411RED
TP413
TP413RED
Side
Side
-
Welded
Welded
Welded
Welded
øø1/2”
øø1/2”
øø1/2”
øø1/2”
180
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Bottom
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
3
C
C
C
C
øø1/2”
øø1/2”
øø1/2”
øø1/2”
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
3
C
C
C
C
Unit
Qty.
Wt. Lbs.
Per 100
10
10
20
20
137
137
125
125
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
4” SQUARE EXTENSION RINGS
11/ 2” DEEP WITH CONDUIT KNOCKOUTS – 21.0 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KNOCKOUTS – 30.3 CUBIC INCH CAPACITY
UL LISTED
TP424
TP422†
TP426
TP428RED
Knockouts
Cat. #
TP443 (21/8” Deep)
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
-
50
50
50
50
50
46
46
46
46
48
øø1/2wøø3/4”
øøw
-
25
25
66
60
-
50
50
TP428, TP833*
11/2” Deep
TP424
TP426
TP428
TP428RED
TP833*
21/8” Deep
TP443
TP465
11/2” Deep Switch & Masonry Box Extension Ring
TP422†
øø1/2wøø1/2” + 3/4” E
*For Air Plenum (no mounting holes). Requires the use of TP854; purchase separately - not UL Listed.
†For use as extension with switch box, not four square box.
FLEXIBLE FIXTURE HANGERS
Features:
tø4VJUBCMFGPSVTFXJUI1/2” or 3/4” fixture conduit stems, these
hangers allow the conduit stem of the fixture (luminaire) to swing
in any direction; maximum swing angle is 26° from vertical max.
slope angles 221/2°
t"WBJMBCMFGPSBUUBDINFOUUPwTRVBSFTUFFMCPYFT
t2VJDLMZBOEFBTJMZBUUBDIFECZUXPTDSFXT
t)BOHFSTBSFESJMMFEBOEUBQQFEGPSVTFXJUI3/4” conduit stem as
standard and come supplied with a 3/4wøø1/2” reducer for 1/2” conduit
stem applications
www.crouse-hinds.com
Certifications and Compliances:
tø6-
t$4"$/P
t4VJUBCMFGPSEBNQMPDBUJPOT
Steel Boxes
TPSFH Square Flexible Fixture Hangers are used in commercial or light
industrial applications where HID high bay and low bay lighting fixtures
are used. Specific applications include storage facilities, shipping
warehouses, retail and DIY facilities.
Standard Materials and Finishes:
tø.BUFSJBMoTIFFUTUFFM
t'JOJTIo[JODDISPNBUFGPSDPSSPTJPOSFTJTUBODF
US: 1-866-764-5454
CAN: 1-800-265-0502
Cat. #
Description
TPSFH12
For use with
4” Square
Boxes
Copyright© 2015 Commercial Products Catalog
Support
Wt. (Lbs.)
50
181
Steel Square Covers
COVERS FOR 4” SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
#8-32 Screw Used on Covers
TP472
TP472RED
TP474
TP478
TP487
TP473, TP475,
TP476, TP477,
TP479, TP483
TP850*
TP854*
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
Capacity
Cu. In.
TP472†
TP472RED
TP474†
TP478†
TP487†
TP473†
TP476†
TP477†
TP475†
TP479†
TP483†
AMR0**
Flat Blank
Flat Blank, Red
Flat, Open with Ears 23/4”
Flat, with 1/2” KO
Flat, with 3/4” KO
Raised 1/4”, Open with Ears 23/4”
Raised 1/2”, Open with Ears 23/4”
Raised 5/8”, Open with Ears 23/4”
Raised 3/4”, Open with Ears 23/4”
Raised 1”, Open with Ears 23/4”
Raised 11/4”, Open with Ears 23/4”
3
/4” - 11/2” Round Adjustable Mud Ring
50
50
50
50
50
50
50
50
25
25
25
25
31
31
21
31
29
23
26
27
31
34
37
44
1.3
4.0
5.0
6.0
7.0
8.5
6.1
Flat Blank Gasketed with Captive Screws
Flat Ring Double Gasketed
25
25
31
12
-
AMR0
Air Plenum
TP850*
TP854*
*For Air Plenum (no mounting holes) - not UL Listed.
**ETL listed.
†CSA certified.
MUD RINGS FOR 4” SQUARE STEEL OUTLET BOXES
Steel Boxes
UL LISTED
TP480
Cat. #
TP482, TP484,
TP486, TP489
TP494
TP488, TP490
TP496, TP499,
TP500, TP501,
TP502
AMR1
AMR2
Description
Unit
Qty.
Wt. Lbs.
Per 100
Capacity
Cu. In.
Flat
/ 4” Raised
/ 2” Raised
5
/ 8” Raised
3
/ 4” Raised
1” Raised
11/ 4” Raised
3
/ 4” - 11/ 2” Raised Adjustable
5
/ 8” - 11/ 4” Raised Adjustable
50
50
50
50
50
50
25
25
25
20
21
23
26
30
34
39
47
44
1.8
3.8
4.3
5.5
6.8
8.5
6.0
Flat
1
/ 4” Raised
1
/ 2” Raised
5
/ 8” Raised
3
/ 4” Raised
11/ 4” Raised
1” Raised
5
/ 8” - 11/ 2” Raised Adjustable
50
50
50
50
50
25
25
25
12
13
18
22
24
31
30
50
3.0
6.0
8.0
9.0
14.0
11.7
11.3
One Device
TP480†
TP482†
TP484†
TP489†
TP486†
TP488
TP490
AMR1**
AMR158**
1
1
Two Device
TP494†
TP496†‡
TP498†‡
TP499†‡
TP500†‡
TP501
TP502
AMR2**
**cULus Listed.
†CSA certified.
‡Slotted design for use with 4” square box partitions.
182
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
AMR158
Steel Square Covers
METALGUARD™ PROTECTIVE PLATES
Applications:
tø'PSVTFXJUITJOHMFUXPUISFFBOEGPVSHBOHDPNNFSDJBMPSSFTJEFOUJBMCPYFTQMBTUFS
rings; with or without devices, switches, GFCI, etc. installed
t$PNNFSDJBMPSSFTJEFOUJBMDFJMJOHCPYFT
Features:
tø4FBMTPVUTIFFUSPDLNVETBOEJOHEVTUBOEQBJOUPWFSTQSBZUPLFFQUIFFMFDUSJDBMCPYBOE
its wiring free from contaminants
t)FBWZEVUZSFVTBCMFNFUBMMJDQMBUFQSPWJEFTNFDIBOJDBMQSPUFDUJPOUPCPYBOEXJSJOHBOE
speeds up trim process
t&BTZUPJOTUBMMBMMZPVIBWFUPEPJTQVTIUIFNJOUIFZDPNFPVUFBTZoKVTUQVUB
screwdriver into the slot in front, turn and pull them out
t3FEVDFTSJTLPGDBMMCBDLTBOEFYQFOTFPGSFXPSLCFDBVTFPGXJSFBOECPYEBNBHF
t.FUBM(VBSETFSWFTBTBHVJEFGPSSPVUFSJODVUUJOHPVUCPYFT
Standard Material & Finish:
tøHBVHFTUFFM
t/BUVSBMGJOJTI
Cat. #
Description
Pre-fabricated Box, Cover, Ground Screw & Lead Assembly
Unit
Qty.
Wt. Lbs.
Per 100
MGRK
MGR1
MGR2
MGR4
MGR0
MGMR1
MGMR2
MGMR0
Contractor Kit (120-1G, 40-2G, 20-3G, 5-4G, and 20-Rnd)
1G Residential Wire Protector
2G Residential Wire Protector
4G Residential Wire Protector
Rnd Residential Wire Protector
1G Wire Protector for Commercial MR
2G Wire Protector for Commercial MR
Rnd Wire Protector for Commercial MR
1
60
20
5
20
50
50
50
33.00
8.20
4.80
3.00
4.00
6.55
10.25
6.00
4” SQUARE SURFACE COVERS – 5.5 CUBIC INCH CAPACITY
RAISED 1/2”
UL LISTED
CSA LISTED
Screw(s) provided in raised cover kit are for use with the center hole on duplex receptacles. Nuts that are provided in kit are to be used in
conjunction with the screws that are provided as standard packaging with devices to mount device to raised cover. For GFCI device installation,
no screw is needed; please disregard.
TP504
TP506
TP508
TP516
TP509 (4 Screws),
TP518 (2 Screws)
TP513
TP511
TP510
TP512
TP515
TP517
Cat. #
Description
Unit
Qty.
TP503
TP504
TP506
TP508
TP510
TP512
TP507
TP514
TP519
TP516
TP509
TP518
TP513
TP511
TP515
TP517
Raised Blank
For One Toggle Switch and One Single Receptacle 113/32” Dia.
For One Toggle Switch and One Duplex Receptacle
For Two Toggle Switches
For Two Duplex Receptacles
For One Toggle Switch
For One 20 Amp Single Receptacle 119/32” Dia.
For One Single Receptacle 113/32” Dia.
For One 30 Amp Twist-Lock Single Receptacle 123/32” Dia.
For One Duplex Receptacle
For One 30-60 Amp Receptacle (4-wire) 27/16” Dia.
For One 30-50 Amp Receptacle 29/64” Dia.
For One GFCI Receptacle
For Two GFCI Receptacles
For One Toggle Switch and One GFCI Receptacle
For One Duplex Receptacle and One GFCI Receptacle
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Wt. Lbs.
Per 100
35
31
31
35
26
35
37
34
37
31
23
34
31
26
31
26
TP507, TP514,
TP519
Copyright© 2015 Commercial Products Catalog
183
Steel Boxes
TP503
Steel Square Covers
UNI-MOUNT™ COVERS
The Uni-Mount combines the features of a mounting device plate
with those of a box support, giving you one universal plate for all of
your needs. Specifically designed for use with metal or wood studs:
The new and improved version incorporates four small holes on the
left side (support side) of the bracket. These holes allow for the
attachment of box mounting brackets to allow for use of both sides
of the stud. The holes are strategically located to accept either the
Eaton’s B-Line Series BB423 bracket or the Caddy H23 bracket.
Additionally, the viewing hole has been significantly enlarged (and is
now diamond shaped) to make it even easier to find mark lines on
the stud.
Features:
t(VJEFUBCTFOTVSFDPOTJTUFOUBMJHONFOUPOTUVE
t4UVEBMJHONFOUIPMFFOTVSFTDPOTJTUFOUNPVOUJOHIFJHIU
t3JHJECSBDLFUEFTJHOFMJNJOBUFTUIFOFFEGPSGBSTJEFTVQQPSU
t"WBJMBCMFBTBTJOHMFPSUXPEFWJDFDPWFS
t6OJWFSTBMEFTJHOGJUTBMMwTRVBSFCPYFT
t"WBJMBCMFJO1/ 2”, 5/ 8” and 3/ 4” raised
t$BOCFPSEFSFEQSFBTTFNCMFEUPQPQVMBSwTRVBSFCPYFT
t'BTUBOEFBTZJOTUBMMBUJPO
t$BOCFVTFEJONVMUJQMFBQQMJDBUJPOTSFTVMUJOHJOMFTTJUFNTUP
stock
t-FTTMBCPSJOUFOTJWF
t-FTTNBUFSJBMIBOEMJOH
t/PNVMUJQMFBTTFNCMJFTUPIBOEMF
t$BOCFVTFEJO$MBTT**DPNNVOJDBUJPOTPVUMFUTGPSMPXWPMUBHF
without a box
t6--JTUFEBOE$4"DFSUJGJFE
t6-'JMF/P&
Steel Boxes
*CSA requires a far side support.
Single Gang
Cat. #
Two Gang
Description
Capacity Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
5
/2” Raised
/8” Raised
3
/4” Raised
3.8
4.3
5.5
50
50
50
43
46
50
/2” Raised
/8” Raised
3
/4” Raised
6.0
8.0
9.0
50
50
50
38
52
54
-
1000
0.5
Single Gang
TP30000
TP31000
TP32000
1
Two Gang
TP35000
TP36000
TP37000
1
5
Low Profile Screws – Reduces Risk of Sheetrock Bulge
TP710
184
L.P. Screws
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
TILE WALL COVERS FOR 4” SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
TP524
TP534
TP540
Applications:
tø5ZQJDBMMZVTFEXJUIUJMFPSCSJDL
Features:
tø3PVOEFEDPSOFSTIFMQHVJEFDVUTBSPVOEEFWJDFT
Cat. #
Description
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
/2” Raised
/4” Raised
1” Raised
11/4” Raised
11/2” Raised
2” Raised
3.7
5.5
7.4
9.3
11.0
14.8
50
50
50
25
25
25
30
36
40
46
50
62
/2” Raised
/4” Raised
1” Raised
11/4” Raised
11/2” Raised
2” Raised
5.0
7.8
10.3
13.0
15.5
20.8
10
10
10
10
10
10
24
30
36
44
50
66
One Device
TP520
TP522
TP524
TP526
TP528
TP530
1
3
Two Device
TP532
TP534
TP536
TP538
TP540
TP542
1
3
Steel Boxes
4” SQUARE BOX PARTITIONS
TP860
Cat. #
TP861
TP862
Description
TP863
Unit
Qty.
Wt. Lbs.
Per 100
25
25
13
18
25
25
16
21
For 11/2” Deep Box with Square Cut Tile Wall Two Gang Covers
TP860
TP861
For 1/2”, 3/4”, 1” Raised Covers
For 11/4”, 11/2”, 2” Raised Covers
For 21/8” Deep Box with Square Cut Tile Wall Two Gang Covers
TP862
TP863
For 1/2”, 3/4”, 1” Raised Covers
For 11/4”, 11/2”, 2” Raised Covers
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
185
Steel Square Boxes
411/16” SQUARE OUTLET BOXES & COVERS
Applications:
• For use with conduit
• For use in commercial and industrial applications, where larger
sized conductor or wiring devices are needed and additional
volume is required
• Available in red for fire alarm applications
Features:
• Ideal for exposed work applications, providing an easy method for
the installation of electrical devices (switches, receptacles, fans,
lights, etc.)
• Raised ground screw location in the welded boxes saves time in
installation
• Concentric knockouts have a 1/2” and 3/4” knockout in the same
location for customer flexibility
• Knockouts are suitable for use without a bonding jumper in circuits
above or below 250 volts
• Available in two depths for differing cubic capacity requirements
• Welded or drawn construction to match customer preference
• Extensive cover offering to meet various customer applications and
needs
Certifications and Compliances:
• UL Listed
411/16” SQUARE OUTLET BOXES – 29.5 CUBIC INCH CAPACITY
11/2” DEEP WITH CONDUIT KOs
Steel Boxes
UL LISTED
TP523
TP548
TP549
Knockouts
Cat. #
Description
Sides
Bottom
TP523
TP523PF†
TP548
TP549
Welded
Welded
Drawn
Drawn
12 - 1/2” + 3/4” C
12 - 1/2” + 3/4” C
8 - 1/2”, 4 - 3/4”
6 - 1/2”, 6 - 1/2” + 3/4” C
2 - 1/2”,
2 - 1/2”,
3 - 1/2”,
3 - 1/2”,
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
Unit
Qty.
Wt. Lbs.
Per 100
25
25
25
25
99
99
84
84
†TP catalog numbers ending in PF include ground screw with pigtail lead.
186
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2016 Commercial Products Catalog
Steel Square Boxes
411/16” SQUARE OUTLET BOXES – 42.0 & 44.0 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KOs
UL LISTED
TP563
TP554
TP842*
TP556
TP832*
TP556RED
TP558
TP835*
TP560
TP836*
TP562
TP557
TP521
TP525
Knockouts
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
25
25
25
25
25
25
25
25
25
25
104
104
104
104
104
104
104
104
104
120
2 - 1/2”,
2 - 1/2”,
2 - 1/2”,
2 - 1/2”,
2 - 3/4”
2 - 3/4”
2 - 1/2” + 3/4” E
2 - 1/2” + 3/4” E
25
25
25
25
115
115
115
115
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
2 - 3/4”
2 - 3/4”
2 - 3/4”
2 - 3/4”
25
25
25
25
115
115
115
115
Bracket
Sides
Bottom
“VS”
6 - 1/2”, 6 - 1/2” + 3/4” C
8 - 3/4”
8 - 1/2”, 4 - 3/4”
8 - 1/2”, 4 - 3/4”
8 - 1/2”, 4 - 3/4”
4 - 3/4”, 4 - 1”
4 - 3/4”, 4 - 1”
8 - 1”
4 - 11/4”
5 - 1/ 2”, 4 - 1/ 2” + 3/ 4” C
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
3 - 1/2”,
-
12 - 1/2”
12 - 1/2”
12 - 1/2”
12 - 1/2”
-
4 - 3/4”, 4 - 1”
8 - 1”
12 - 3/4”
8 - 1/2”, 4 - 3/4”
42.0 Cubic Inch Capacity
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Steel Boxes
TP563
TP554
TP556
TP556PF†
TP556RED
TP558
TP558PF†
TP560
TP562‡
TP557
44.0 Cubic Inch Capacity
TP521
TP521PF†
TP525**
TP525PF†
Welded
Welded
Welded
Welded
+
+
+
+
/4”
/4”
3
/4”
3
/4”
3
3
C
C
E
E
Air Plenum
TP835*
TP836*
TP842*
TP832*
*For Air Plenum (no mounting holes) - not UL Listed.
**Raised ground bump contains holes for two ground screws.
†TP catalog numbers ending in PF include ground screw with pigtail lead.
‡Not UL Listed.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2016 Commercial Products Catalog
187
Steel Square Covers
411/16” SQUARE EXTENSION RINGS
11/2” DEEP WITH CONDUIT KOs – 29.5 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KOs – 42.0 CUBIC INCH CAPACITY
UL LISTED
TP550
TP564
TP837*
Knockouts
Cat. #
Description
TP564RED
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/ 2wøø3/ 4”
-
25
66
øø1/ 2wøø3/ 4”
øø1/ 2wøø3/ 4”
-
25
25
84
84
øø1/ 2wøø3/ 4”
-
25
84
11/2” Deep – 29.5 Cubic Inch Capacity
TP550
2 /8” Deep – 42.0 Cubic Inch Capacity
1
TP564
TP564RED
Air Plenum
TP837*
21/ 8” Deep
Steel Boxes
*For Air Plenum (no mounting holes) - not UL Listed.
TP837 requires the use of TP852, purchased separately.
188
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
411/16” SQUARE COVERS – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
TP568
TP568RED
TP569, TP570, TP571,
TP573, TP575
TP572
TP574 - TP582,
TP529, TP531
TP584, TP586, TP589,
TP593, TP541, TP543
TP851*
TP852*
Cat. #
Description
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
Flat Blank
Flat Blank, Red
1
/2” Raised, with Ears 23/4”
5
/8” Raised, with Ears 23/4”
3
/4” Raised, with Ears 23/4”
Flat, with 1/2” KO
1” Raised, with Ears 23/4”
11/4” Raised, with Ears 23/4”
3.3
3.8
5.0
7.0
9.0
25
25
25
25
25
25
25
25
40
40
36
38
40
40
44
48
Flat Blank Gasketed with Captive Screws Flat Ring Double Gasketed
-
50
25
42
20
/4” Raised
/2” Raised
/4” Raised
5
/8” Raised
1” Raised
11/4” Raised
11/2” Raised
2” Raised
1.8
3.3
5.0
4.5
6.8
8.5
11.3
15.0
25
25
25
25
25
25
25
25
32
36
42
39
46
52
64
76
Flat
/4” Raised
1
/2” Raised
5
/8” Raised
3
/4” Raised
1” Raised
11/4” Raised
11/2” Raised
2” Raised
3.0
6.0
8.0
8.8
11.7
14.0
18.8
24.5
25
25
25
25
25
25
25
25
25
21
26
30
32
34
38
42
63
79
Flat and Raised
Steel Boxes
TP568†
TP568RED
TP569‡
TP570
TP571‡
TP572†
TP573‡
TP575‡
Air Plenum
TP851*
TP852*
One Device
TP574
TP576
TP578
TP579
TP580
TP582
TP529
TP531
1
1
3
Two Device
TP590‡
TP583‡
TP584
TP587
TP586
TP589
TP593
TP541
TP543
1
*For Air Plenum (no mounting holes).
†CSA certified.
‡Not UL Listed.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
189
Steel Square Covers
411/16” SQUARE SURFACE COVERS – 9.0 CUBIC INCH CAPACITY
/2” RAISED
Steel Boxes
1
TP720
TP722
TP724, TP730,
TP736
TP726
TP728
TP732
TP734
TP738
TP740
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP720
TP722
TP724
TP730
TP736
TP726
TP728
TP732
TP734
TP738
TP740
TP741
For One Toggle Switch
For One Duplex Receptacle
For One Single Receptacle 113/32” Dia.
For One 20 Amp Single Receptacle 1.620” Dia.
For One 1.730” Dia. Power Outlet
For Two Toggle Switches
For Two Duplex Receptacles
For One 2.125” Dia. Range/Dryer Receptacle
For One 2.480” Dia. Power Outlet
For One Ground Fault Interrupter
For One GFI Receptacle and One Toggle
For Two GFI Receptacles
10
10
10
10
10
10
10
10
10
10
25
10
52
49
53
50
51
52
44
48
45
45
45
43
190
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Utility Boxes & Covers
UTILITY BOXES – CUBIC INCH CAPACITY (SEE BELOW)
4” LONG x 21/8” WIDE
UL LISTED
TP588, TP647
TP591
TP592, TP600,
TP602
TP598, TP605
TP594, TP596
Knockouts
Cat. #
Bracket
TP604, TP606
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
50
40
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
42
51
øø1/2”
-
50
36
øø1/2”
øø3/4”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
60
øø1/2”
øø3/4”
-
50
50
41
41
øø1/2”
øø3/4”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
56
56
66
11/4” Deep – 8.5 Cubic Inch Capacity
TP647
-
11/2” Deep – 10.3 Cubic Inch Capacity
TP588
TP591
“F”, Set 1/ 4”
11/2” Deep Extension Rings – 10.3 Cubic Inch Capacity
TP592
-
1 /8” Deep – 13.0 Cubic Inch Capacity
7
TP594
TP596
TP598
“S”, Set 1/2”
17/8” Deep Extension Rings – 13.0 Cubic Inch Capacity
TP600
TP602
-
21/8” Deep – 14.5 Cubic Inch Capacity
“S”, Set 1/2”
Steel Boxes
TP604
TP606
TP605
UTILITY BOX COVERS
UL LISTED
TP608
TP610
TP612
TP613
TP614
TP616
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP608*
TP610*
TP612*
TP613*
TP614*
TP616*
TP618*
Blank
For 20 and 30 Amp, Twist Lock, 119/32” Dia.
Single Receptacle, 113/32” Dia.
For GFCI Device
1
/2” KO
Duplex Receptacle
One Toggle Switch
100
100
100
100
100
100
100
10
9
9
7
10
8
10
TP618
*CSA certified.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
191
Steel Switch Boxes
1” DEEP – NON-GANGABLE – 6.5 CUBIC INCH CAPACITY
115/16” WIDE x 33/4” LONG
TP101
TP103
Knockouts
Cat. #
Bracket
Plastic Clamp
Conduit
Cable
Unit
Qty.
Wt. Lbs.
Per 100
TP101
TP103
“S”
“S”
No
Yes
øø1/2”
øø1/2”
2
2
25
25
38
39
11/2” DEEP – NON-GANGABLE – 7.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
Steel Boxes
UL LISTED
TP100
TP104
TP106
Knockouts
Cat. #
Bracket
TP114
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø$BCMF
øø$BCMF
-
øø1/2”
øø1/2”
50
50
43
50
Yes
2 - Cable
-
øø1/2”
50
44
Yes
øø1/2”
-
øø1/2”
50
39
Ears
For Non-metallic Cable – Clamps in Each End
TP100
TP104
“S”, Set 1/2”
Yes
-
For Armoured & Metal-clad (MCI) Cable – Clamps in Each End
TP106*
-
For Conduit – No Clamps, Flush Device
TP114
-
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP ).
MCAP™ is a registered trademark of Southwire Company.
™
192
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
2” DEEP – GANGABLE – 10.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
TP116
TP118
TP123
TP124
TP126
TP130
TP132
TP131 Hold-Tite
Knockouts
Cat. #
Bracket
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
2 - Cable
2 - Cable
-
øø1/2”
øø1/2”
50
50
53
60
Yes
-
2 - Cable
2 - Cable
2 - Cable
-
øø1/2”
øø1/2”
øø1/2”
50
50
50
54
63
61
Yes
Yes
øø1/2”
øø1/2”
øø1/2”
øø1/2”- T
øø1/2”
øø1/2”
øø1/2”, 1 Side
-
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
47
48
58
52
Ears
Steel Boxes
TP120
For Non-metallic Cable – Clamps in Each End
TP116
TP118
“S”, Set 5/8”
Yes
-
For Armoured & Metal-clad (MCI) Cable – Clamps in Each End
TP120*
TP123*
TP124*
“F”, Set 1/2”
“S”, Set 5/8”
For Conduit – No Clamps, Flush Device
TP126
TP130
TP132
TP131
“S”, Set 5/8”
Hold-Tite
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
193
Steel Switch Boxes
21/4” DEEP – GANGABLE – BEVELED CORNERS – 10.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
TP134
TP137 Hold-Tite
TP138
Knockouts
Cat. #
Description
Ears
Bumps
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
Yes
-
2 - Cable
2 - Cable
2 - Cable
-
øø1/2”
øø1/2”
øø1/2”
50
50
50
51
57
55
Clamp Screws Through Beveled Corners
TP134
TP137
TP138
Gangable
Gangable
Gangable
Yes
Yes
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
Steel Boxes
UL LISTED
TP158
TP162
TP163
TP170
TP161
TP172
Cat. #
Bracket
Ears
Ground
Pigtail
Leveling
Bumps
Yes
Yes
-
Yes
-
TP164, TP168
TP174
TP171
Knockouts
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø$BCMFøø1/2”
øø$BCMF
øø$BCMF
øø$BCMF
øø$BCMF
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
50
50
50
50
50
50
59
63
73
62
65
71
71
69
70
71
73
For Non-metallic Cable – Clamps in Each End
TP158
TP115*
TP161
TP162
TP163
TP164
TP168
TP170
TP172
TP174
TP171
Snap-in
Hold-Tite
“F”, Set 1/2”
“F”, Set 1/4”
“S”, Set 5/8”
“D”, Set 5/8”
“D”, Set 5/8”
“VP”, Set 1/2”
Yes
Yes
Yes
Yes
-
*Not UL Listed.
194
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG FOR ARMOURED & METAL-CLAD (MCI) CABLE – CLAMPS IN EACH END
UL LISTED
TP177
TP178
TP179 Hold-Tite
TP184
TP180
TP185
Knockouts
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP177*
TP178*
TP179*
TP180*
TP184*
TP185*
Snap-in
Hold-Tite
“F”, Set 1/2”
“S”, Set 5/8”
“VP”, Set 1/2”
Yes
Yes
Yes
-
2 - Cable
2 - Cable
2 - Cable
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
50
74
63
66
72
70
74
Steel Boxes
Cat. #
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
GANG BOXES SET BACK 1/2”
21/2” DEEP – 33/4” HIGH – 1/2” & 3/4” CONCENTRIC KOs
UL LISTED
TP632
TP633
TP637
Knockouts
TP638
Cat. #
Gang
Bracket
Width
Each End
Each Side
Bottom
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP632
TP633
TP637
TP638
3
4
3
4
VP
VP
VS
VS
59/16”
73/8”
59/16”
73/8”
2
2
2
2
3
4
3
4
6
8
6
8
46.5
62.0
46.5
62.0
5
5
5
5
143
179
143
179
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
195
Steel Switch Boxes
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR CONDUIT – NO CLAMPS
Steel Boxes
UL LISTED
TP214
TP216
TP217
TP220
TP222
TP224
Cat. #
Bracket
Ears
Leveling
Bumps
TP214
TP216
TP217
TP218
TP220
TP222
TP224
Snap-in
“F”, Set 1/2”
“S”, Set 5/8”
Hold-Tite
Yes
Yes
Yes
Yes
Yes
-
196
www.crouse-hinds.com
US: 1-866-764-5454
TP218
Knockouts
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”, 1 Side
øø1/2”, 1 Side
-
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
50
50
55
69
64
58
66
65
61
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
21/2” DEEP SWITCH BOXES – “INSTANT ON” – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
WITH BUMPS – CLAMPS IN EACH END (BUMPS LEVEL THE BOX AGAINST THE SIDE OF STUD, TOP TO
BOTTOM, FRONT TO BACK)
TP210
TP213
Knockouts
Cat. #
TP210
TP213
Clamps
NM Cable
Armoured Cable
Nails
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
Angle
Angle
øø$BCMFøø1/2”
øø$BCMFøø1/2”
-
øø1/2”
øø1/2”
50
50
66
66
23/4” DEEP – GANGABLE – 14.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
TP662
TP668
TP670
TP664
Steel Boxes
TP660
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø$BCMF
øø$BCMF
øø$BCMF
øø1/ 2”
øø1/ 2”
øø1/ 2”
øø1/ 2”
øø1/ 2”
øø1/ 2”
50
50
50
62
67
70
øø1/ 2”
øø1/ 2”
øø1/ 2”
øø1/ 2”
50
50
68
71
For Non-metallic Cable – Clamps in Each End
TP660
TP662
TP664
“S”, Set 5/ 8”
Yes
-
For Armoured & Metal-clad (MCI) Cable – Clamps in Each End
TP668*
TP670*
“S”, Set 5/ 8”
Yes
-
øø$BCMF
øø$BCMF
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
197
Steel Switch Boxes
23/4” DEEP – GANGABLE – 14.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR CONDUIT – NO CLAMPS
UL LISTED
TP672, TP674
(TP676 – 1 screw ear),
(TP678 – 2 screw ears)
TP680, TP677
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP672
TP674
TP676
TP678
TP680
TP677
“S”, Set 5/8”
“S”, Set 5/8”
Yes
Yes
-
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”, 1 Side
øø3/4”, 1 Side
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
50
59
59
61
61
70
70
31/2” DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR NON-METALLIC CABLE – CLAMPS IN EACH END
Steel Boxes
UL LISTED
TP236
TP238
TP239
TP242
TP243
TP240
Knockouts
Cat. #
Bracket
Ground
Pigtail
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP236
TP238
TP239
TP240
TP242
TP243
“F”, Set 1/2”
“S”, Set 7/8”
“S”, Set 7/8”
Yes
Yes
Yes
Yes
-
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
25
25
25
25
25
25
78
80
81
88
87
88
198
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
31/2” DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR ARMOURED & METAL-CLAD (MCI) CABLE – CLAMPS IN EACH END
UL LISTED
TP244
Cat. #
Bracket
TP244*
TP249*
TP246*
“S”, Set 7/8”
TP249
Ground
Pigtail
Yes
-
TP246
Knockouts
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
Yes
Yes
-
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
25
25
25
81
82
88
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
31/2” DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR CONDUIT – NO CLAMPS
UL LISTED
TP252
Steel Boxes
TP248, TP250
TP254
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP248
TP250
TP252
TP254
-
Yes
Yes
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø3/4”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
25
25
25
25
74
74
76
76
11/2” DEEP SWITCH & MASONRY BOX EXTENSION RING
TP422†
Knockouts
Cat. #
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
-
50
50
11/2” Deep Switch & Masonry Box Extension Ring
TP422†
øø1/2wøø1/2” + 3/4” E
†For use as extension with switch box, not four square box. See page 181 for 4” steel square covers.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
199
Steel Gang Boxes
GANG BOXES
15/8” DEEP x 41/2” HIGH
1
/2” & 3/4” KOs
UL LISTED
TP629
TP630
TP640
Knockouts
Cat. #
Gang
Cubic
Inches
Width
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP629
TP630
TP631
TP640
TP641
2
3
4
5
6
45
58
70
85
95
613/16”
85/8”
107/16”
121/4”
141/16”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
5
5
5
1
1
45
58
70
85
95
GANG BOXES
21/2” DEEP x 41/2” HIGH
3
/4” & 1” KOs
Steel Boxes
UL LISTED
TP871
TP873
Knockouts
Cat. #
Gang
Cubic
Inches
Width
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP870
TP871
TP872
TP873
TP874
2
3
4
5
6
71
90
110
132
150
613/16”
85/8”
107/16”
121/4”
141/16”
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø3/4wøøw
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
10
10
5
5
5
147
183
216
263
282
GANG BOX PARTITIONS
TP876
TP877
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP876
TP877
For 15/8” Deep Box
For 21/2” Deep Box
25
50
19
24
200
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Gang Box Covers
GANG BOX COVERS
RAISED 13/16” FOR PLASTER
UL LISTED
TP653
Cat. #
Gang
TP657
TP653
AMR3**†
TP655
TP661
TP667
2
3
3
4
5
6
TP667
AMR3
Length
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
7”
813/16”
/4” - 11/2” Raised Adjustable
105/8”
127/16”
141/4”
8.5
13.5
10.4
18.3
23.0
28.3
5
5
25
5
5
5
53
60
78
66
75
85
3
**ETL listed.
†CSA certified.
GANG BOX COVERS, FLAT, BLANK
UL LISTED
TP803
TP806
Gang
Length
Unit
Qty.
Wt. Lbs.
Per 100
TP802
TP803
TP804
TP805
TP806
2
3
4
5
6
7”
813/16”
105/8”
127/16”
141/4”
5
5
5
1
1
66
85
94
122
132
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Steel Boxes
Cat. #
Copyright© 2015 Commercial Products Catalog
201
Steel Masonry Boxes
MASONRY BOXES
21/2” DEEP x 33/4” HIGH
1
/2” & 3/4” CONCENTRIC KOs
UL LISTED
TP682
Knockouts
Cat. #
Gang
Width
Each End
Each Side
Bottom
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP682
TP683
TP684
TP685
TP686
TP687
1
2
3
4
5
6
115/16”
33/4”
59/16”
73/8”
93/16”
11”
1
2
3
4
5
6
2
2
2
2
2
2
2
4
6
8
10
12
15.5
31.0
46.5
62.0
77.5
93.0
20
10
5
5
5
1
70
103
129
165
189
230
MASONRY BOXES
31/2” DEEP x 33/4” HIGH
1
/2” & 3/4” CONCENTRIC KOs
UL LISTED
TP690
TP691
Steel Boxes
Knockouts
Cat. #
Gang
Width
Each End
Each Side
Bottom
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP690
TP691
TP692
TP693
TP694
TP695
1
2
3
4
5
6
115/16”
33/4”
59/16”
73/8”
93/16”
11”
2
4
6
8
10
12
2
2
2
2
2
2
2
4
6
8
10
12
22.0
44.0
66.5
88.0
110.0
132.0
20
10
10
5
5
1
84
120
155
207
235
287
MASONRY BOX PARTITIONS & EXTENSION RING
TP422†
TP820
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
25
25
3
4
Masonry Box Partitions
TP820
TP821
Non-metallic Partition for 21/2” Deep Masonry Boxes
Non-metallic Partition for 31/2” Deep Masonry Boxes
Knockouts
Cat. #
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
-
50
50
11/2” Deep Switch & Masonry Box Extension Ring
TP422†
øø1/2wøø1/2” + 3/4” E
†For use as extension with switch box, not four square box. See page 181 for 4” steel square covers.
202
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Masonry Boxes
GANGABLE MASONRY BOXES
UL LISTED
Features:
tø5IFHBOHBCMFGFBUVSFBMMPXTUIFPQUJPOPGDSFBUJOHBNVMUJQMFHBOH
box from a single gang box by simply removing the combo head
screw holding the side with a #2 bit and connecting the two (or
more) boxes together re-using the screws
t/PONFUBMMJDQBSUJUJPOTPSEFSFETFQBSBUFMZ
JOTUBMMRVJDLMZBOE
easily without tools in multi-gang boxes and are used to separate
power and control circuits within the same box, as required by the
National Electrical Code®
Knockouts
Cat. #
Width
Each End
Each Side
Bottom
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
2
2
15.5
20
63
4
2
22.0
20
82
21/2” Deep x 33/4” High, 1/2” & 3/4” Concentric KOs
TP671
115/16”
2
3 /2” Deep x 3 /4” High, 1/2” & 3/4” Concentric KOs
1
TP675
3
115/16”
2
GANGABLE MASONRY BOX PARTITIONS
Steel Boxes
TP654
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP654
TP656
Non-metallic Partition for 21/2” Deep Gangable Masonry Boxes
Non-metallic Partition for 31/2” Deep Gangable Masonry Boxes
25
25
4
6
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
203
Steel Octagon Boxes & Ceiling Pans
31/4” ROUND CEILING PANS† – 4.0 CUBIC INCH CAPACITY
/2” DEEP
CLAMPS IN BOTTOM
FIXTURE RATED
1
UL LISTED
TP266
Knockouts
Cat. #
Cable
Conduit
Unit
Qty.
Wt. Lbs.
Per 100
TP266
øø$BCMF
øø1/2”
50
30
†Weight limit for 31/4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
31/4” OCTAGON OUTLET BOXES† – 9.0 CUBIC INCH CAPACITY
11/2” DEEP
FIXTURE RATED
UL LISTED
TP256
TP258
TP259
Steel Boxes
Knockouts
Cat. #
TP260
TP264
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
Extension Ring
øø1/2”
øø1/2”
øø1/2”
-
50
50
41
31
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
53
44
47
For Conduit – No Clamps
TP256
TP258
For Non-metallic Cable with Clamps
TP259
TP260
TP264
“S” Bracket, Set 1/2”
Two Screw Ears
†Weight limit for 31/4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
31/4” ROUND CEILING COVERS
UL LISTED
TP270
TP272
Knockouts
Cat. #
Cable
Unit
Qty.
Wt. Lbs.
Per 100
TP270
TP272
Flat Blank
Flat, 1/ 2” KO in Center
100
100
18
18
204
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Octagon Boxes & Ceiling Pans
4” ROUND CEILING PANS* – 6.0 CUBIC INCH CAPACITY
/2” DEEP
FIXTURE RATED
1
UL LISTED
TP269
TP267
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP269
TP267
KOs Only
KOs and Clamps
-
øø1/2”
øø$BCMFøø1/2”
50
50
35
39
*Weight limit for 31/4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture. Not suitable for fans.
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
UL LISTED
TP276
TP273
TP280
Knockouts
TP282
TP284, TP286
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP274
TP273
TP276
TP278
TP280
TP282
Blank Bottom
“C” Bracket
“S” Bracket, Set 1/2”
øø1/2”
øø1/2”
øø3/4”
øø1/ 2wøø3/4”
øø1/2”
øø1/2”
øø1/2”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2”
øø1/2”
50
50
50
50
50
50
50
51
50
50
60
58
For Air Plenum
øø1/2”
øø1/2”
50
52
50
50
36
36
Steel Boxes
TP274, TP278,
TP834*
Air Plenum
TP834*
Octagon Extension Rings – (Slot & Key Permit Mounting without Removing Box Screws)
TP284‡
TP286‡
-
øø1/2”
øø1/2wøø3/4”
-
*For Air Plenum (no mounting holes) - not UL Listed.
†Weight limit for 31/ 4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
‡CSA certified.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
205
Steel Octagon Boxes & Ceiling Pans
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE – CLAMPS IN EACH END
FIXTURE RATED
UL LISTED
TP310
TP312
TP314
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP310*
TP312*
TP314*
“C” Bracket
“S” Bracket, Set 1/2”
øø$BCMFøø1/2”
øø$BCMFø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
57
66
64
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
†Weight limit for 31/ 4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR NON-METALLIC CABLE – WITH CLAMPS
FIXTURE RATED
Steel Boxes
UL LISTED
TP298
TP300
TP302
TP304
Knockouts
TP306
TP308
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP298
TP300
TP302
TP304
TP306
TP308
With Side Nail Holes
“C” Bracket
“S” Bracket, Set 1/2”
Two Screw Ears
“F” Bracket, Set 1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
50
50
50
50
50
50
56
55
65
64
58
64
†Weight limit for 31/4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
206
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Octagon Boxes & Ceiling Pans
4” OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
21/8” DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
UL LISTED
TP288, TP290, TP294
TP292, TP838*
TP339
TP292RED
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP288
TP288PF‡
TP290
TP290PF‡
TP292
TP292PF‡
TP292RED
TP294
TP339
Blank Bottom
øø1/2”
øø1/2”
øø3/4”
øø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øø1/2wøø3/4”
øøw
ø1/2”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
øoø1/2wøoø3/4”
-
25
25
25
25
25
25
25
25
25
64
64
64
64
64
64
64
64
65
For Air Plenum
øø1/2wøø3/4”
øø1/2wøø3/4”
25
62
Air Plenum
TP838*
*For Air Plenum (no mounting holes) - not UL Listed.
†Weight limit for 31/ 4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
‡TP catalog numbers ending in PF include ground screw with pigtail lead.
4” OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
Steel Boxes
21/8” DEEP – WITH CABLE CLAMPS
FIXTURE RATED
UL LISTED
TP316
TP318
TP320
TP317
Knockouts
Cat. #
TP338
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
“C” Bracket
“S” Bracket, Set 1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
25
25
25
68
88
81
øø1/2”
øø1/2”
øø1/2”
25
25
25
69
82
82
For Non-metallic Cable
TP316
TP318
TP320
For Armoured & Metal-clad (MCI) Cable – Clamps in Each End
TP317*
TP338*
TP338PF‡
“S” Bracket, Set 1/2”
“S” Bracket, Set 1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
*UL approved for use with aluminum interlocking grounding metal-clad cable, Type MCIA (Southwire MCAP™).
MCAP™ is a registered trademark of Southwire Company.
†Weight limit for 31/4” and 4” Octagon Outlet Boxes and Ceiling Pans is 50 lbs. for fixture/luminaire. Not suitable for fans.
‡TP catalog numbers ending in PF include ground screw with pigtail lead.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
207
Steel Octagon Covers & Accessories
4” OCTAGON BOX & ADJUSTABLE BAR SETS – 15.5 CUBIC INCH CAPACITY
11/2” DEEP BOX SETS
FIXTURE RATED
UL LISTED
Weight limits: 50 lbs. at 16”.
TP372
Cat. #
TP377
TP367
Stud Spacing
Stud
Unit
Qty.
Wt. Lbs.
Per 100
16”
Yes
25
85
-
25
102
25
25
100
100
For Conduit – No Clamps
TP372*
For Non-metallic Cable – with Clamps
TP377
16”
For Armoured & Metal-clad (MCI) Cable – Clamps in Each End
TP367
TP367PF†
16”
16”
-
*4” Octagon Box and Adjustable Bar Sets have 1/2” KOs for conduit.
†TP catalog numbers ending in PF include ground screw with pigtail lead.
ADJUSTABLE BAR HANGERS
UL LISTED
Features:
Steel Boxes
tø)PMEJOHQSPOHIPMETCPYJOQMBDFGPSOBJMJOH
t%FTJHOSFTJTUTCFOEJOHBOEUXJTUJOH
t-PDLJOHUBCTUPIPMECBSJOQPTJUJPO
TP356
TP352
Cat. #
Stud
Spacing
Fan
Rated
16” Fan
Weight
(Lbs.)
24” Fan
Weight
(Lbs.)
Fixture
Rated
16” Fixture
Weight
(Lbs.)
24” Fixture
Weight
(Lbs.)
Unit
Qty.
Wt. Lbs.
Per 100
TP356
TP352
16”
16” - 24”
No
Yes
70
-
Yes
Yes
50
90
50
50
50
41.0
34.1
208
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Octagon Covers & Accessories
4” OCTAGON BOX COVERS – CUBIC CAPACITY (SEE BELOW)
UL LISTED
TP322, TP853*
TP323
TP326, TP331,
TP332, TP333
TP328
TP329
TP335
TP334
TP336
Cat. #
Description
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP322†
TP322RED†
TP323†
TP333
TP332
TP326
TP331
TP328†
TP329†
TP335
TP334‡
TP336
Flat Blank, Octagon Shape
Flat Blank, Octagon Shape
Flat Blank, Round Shape
Raised 1”, Open with Ears 23/ 4”
Raised 1/ 2”, Open with Ears 23/ 4”
Raised 5/ 8”, Open with Ears 23/ 4”
Raised 3/ 4”, Open with Ears 23/ 4”
Flat with 1/ 2” KO, Octagon Shape
Flat with 1/ 2” KO, Round Shape
Flat, for Toggle Switch
Flat, Single Receptacle 113/ 32”
Flat, for Duplex Receptacle
7.0
3.3
3.8
5.0
-
50
50
50
25
50
50
50
50
50
50
50
50
22
22
24
30
22
20
26
22
24
23
21
18
Flat, Blank with PVC Gasket
-
50
24
Air Plenum
Steel Boxes
TP853*‡
*For Air Plenum (no mounting holes).
†CSA certified.
‡Not UL Listed.
FLEXIBLE FIXTURE HANGERS
TPRFH Flexible Fixture Hangers are used in commercial or light
industrial applications where HID high bay and low bay lighting
fixtures are used. Specific applications include storage facilities,
shipping warehouses, retail and DIY facilities.
Features:
tø4VJUBCMFGPSVTFXJUI1/2” or 3/4” fixture conduit stems, these
hangers allow the conduit stem of the fixture (luminaire) to swing
in any direction; maximum swing angle is 26° from vertical max.
slope angles 221/2°
t"WBJMBCMFGPSBUUBDINFOUUPSPVOEPSPDUBHPOBMTUFFMCPYFT
t2VJDLMZBOEFBTJMZBUUBDIFECZUXPTDSFXT
t)BOHFSTBSFESJMMFEBOEUBQQFEGPSVTFXJUI3/4” conduit stem as
standard and come supplied with a 3/4wøø1/2” reducer for 1/2” conduit
stem applications
Standard Materials and Finishes:
tø.BUFSJBMoTIFFUTUFFM
t'JOJTIo[JODDISPNBUFGPSDPSSPTJPOSFTJTUBODF
Certifications and Compliances:
tø6-
t$4"$/P
t4VJUBCMFGPSEBNQMPDBUJPOT
www.crouse-hinds.com
US: 1-866-764-5454
Cat. #
Description
TPRFH12
For use with 4”
Round or
Octagon Boxes
CAN: 1-800-265-0502
Support
Wt. (Lbs.)
50
Copyright© 2015 Commercial Products Catalog
209
Steel Specialty Boxes
LAMPHOLDERS
Applications:
tø'PSVTFXJUIwPDUBHPOCPYFT
Standard Material:
tø1MBTUJDNPMEFEPGIFBUBOEJNQBDUSFTJTUBOUNBUFSJBMUIBUQSFWFOUT
discoloring and reduces breakage
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP16099
Lampholder, Keyless, Feed Through
50
23
4” OCTAGON CONCRETE BOXES & HUNG CEILING BOXES*
UL LISTED
Steel Boxes
TP620, TP622, TP628
TP635, TP636, TP644
TP623, TP624
(Bars Not Included)
Cat. #
Depth
Knockouts
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP620*
TP622*
TP628*
TP634†
TP635*
TP636*
TP639†
TP642†
TP644*
2”
21/2”
3”
3”
31/2”
31/2”
31/2”
4”
4”
/2” and 3/4” Single Row
/2” and 3/4” Single Row
1
/2” and 3/4” Single Row
1” and 3/4” Single Row
1
/2” Double Row
1
/2” and 3/4” Double Row
1” and 3/4” Double Row
1” and 3/4” Double Row
1
/2” and 3/4” Double Row
23.0
29.0
35.0
30.3
43.0
43.0
41.0
47.0
47.0
25
25
20
20
20
20
20
20
20
60
72
85
77
93
93
89
106
113
43.0
43.0
20
20
93
93
1
1
Hung Ceiling Boxes (with TP650 Cover; Bars Not Included)
TP623*
TP624*
31/2”
31/2”
/2” Double Row
/2” and 3/4” Double Row
1
1
*Weight limit for 4” Octagon Concrete Boxes is 50 lbs. Not suitable for fans.
†Not UL Listed.
210
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Specialty Boxes
4” FAN RATED OCTAGON CONCRETE BOX
UL LISTED
TP643
Applications:
Features:
tø6TFEJOQPVSFEEFDLBQQMJDBUJPOT
t5ZQJDBMDPOTUSVDUJPOJODMVEFTIJHISJTFTBQBSUNFOUT
condominiums and restaurants with outdoor dining areas
t*OTUBMMFEPOXPPEFOPSTUFFMGPSNTBOEDPODSFUFQPVSFEBSPVOE
t6QPOSFNPWBMPGUIFGPSNTUIFCPYJTGMVTIXJUIUIFDPODSFUF
t*UJTDPNNPOBOEDPOUJOVJOHUPCFDPNFFWFONPSFTPUPIBWF
ceiling fans mounted to these boxes; because of the additional
mounting support boss, this new box is suitable for use with fans
of up to 70 pounds and fixtures up to 90 pounds
1. The TP643 Fan Rated Concrete Box is made from two-piece
welded construction and is supplied with two rows of 1/2” and 3/4”
dedicated KOs
2. The box is also supplied with two external mounting ears which
are used to secure the box to the forms
3. The fan (or fixture) is held securely in place by the two 10-32 x
11/2” long pan head screws and lock washers; the screws attach to
the specially designed boss
4. There are two 8-32 x 1/2” screws provided for attachment of a box
plate/cover (TP648, TP649 or TP650 – ordered separately)
5. Mounting support boss and locknuts allow the TP643 box to be
used with fans of up to 70 pounds and fixtures up to 90 pounds
Cat. #
Depth
Knockouts
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP643
4”
1
/2” and 3/4”
46.0
20
102
CONCRETE BOX PLATES
UL LISTED
Steel Boxes
TP648
TP649
TP650
TP652
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP648
TP649
TP650
TP652
/P4UVEøø1/2wBOEøø3/4” KOs
Flat, Blank
3
/8w4UVEøø1/2wBOEøø3/4” KOs
Single Receptacle
50
50
50
50
28
28
33
24
www.crouse-hinds.com
CAN: 1-800-265-0502
US: 1-866-764-5454
Copyright© 2015 Commercial Products Catalog
211
Ceiling Fan Boxes & Supports
CEILING FAN BOXES & SUPPORTS – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
Weight limits:
TP261 – 35 lbs. max. for fans; 50 lbs. max. for fixture.
TP301 – Fan is supported independent of outlet box. Mounting screws go through box and into joist. Box will support fans up to 70 lbs. and
fixtures up to 90 lbs.
Steel Boxes
TP275 – 70 lbs. max. for fans; 90 lbs. max. for fixtures.
TP275
TP261
TP301
TP315
TP379
TP352
Knockouts
Weight Limits (Lbs.)
Sides
Bottom
Unit
Qty.
15.5
øø$BCMF
øø1/ 2”
øø1/ 2”
20
66.6
70
90
wøøw
15.5
øø1/ 2”
øø1/ 2”
12
192.0
35
50
11/ 2” Deep with Fan
Brace Old Work Bar
Hanger
wøøw
15.5
øø1/ 2”
øø1/ 2”
12
207.0
35
50
/ 8” Deep with
External Clamp and
Mounting Screws
(Polybagged)
-
8.0
-
øø1/ 2”
20
50.0
35
50
/ 2” Deep, 4” Round,
with NM Snap-in
Connector, Mtg.
Screws, Protective
Cover (No Bag)
-
6.8
-
øø1/ 2”
20
51.0
70*
90*
Cat. #
Description
TP275
11/ 2” Deep, Clamps
and Mounting Screws (Polybagged)
TP315†
11/ 2” Deep Octagon,
Fan Box with New
Work Bar Hanger
TP379
Capacity
Cu. In.
Stud Spacing
Wt. Lbs.
Per 100
Fans
Fixtures
5
TP261
1
TP301*
*TP301 Fan is supported independent of outlet box.
†TP315 comes with Romex clamp installed on one side. The other three sides have a 1/ 2” KO, a bagged MC clamp and screw, and a bagged plastic NM connector.
ADJUSTABLE BAR HANGERS
Cat. #
Stud
Spacing
Fan
Rated
16” Fan
Weight
(Lbs.)
24” Fan
Weight
(Lbs.)
Fixture
Rated
16” Fixture
Weight
(Lbs.)
24” Fixture
Weight
(Lbs.)
Unit
Qty.
Wt. Lbs.
Per 100
TP352
16” - 24”
Yes
70
-
Yes
90
50
50
34.1
212
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Ceiling Fan Boxes & Supports
CEILING FAN BOXES – PVC
UL LISTED
Weight limits: fans and fixtures are supported independent of outlet box. Mounting screws go through box and into joist.
Box will support up to 70 lbs. for fans and 90 lbs. for fixtures. Provided with Romex connector.
TP1300
Cat. #
Description
TP1300
41/16” Dia., 1/2” Deep Pan Section, 4” Deep
Overall – with Mtg. Hardware and External Clamp,
Protective Cover
Capacity
Cu. In.
Knockouts
Integral
Clamp
Unit
Qty.
Wt. Lbs.
Per 100
14.0
øø1/2”
1
24
34
NON-METALLIC CEILING FAN BOXES
23/16” DEEP
UL LISTED
With clamps for non-metallic cable.
All mounting hardware supplied; suitable for support of fans weighing
up to 35 lbs.
Features:
Steel Boxes
tø.BEFPGIFBWZEVUZFOHJOFFSFEUIFSNPQMBTUJDNBUFSJBM
t0GGFSTUIFMBCPSTBWJOHGFBUVSFPGRVJDLFOUSZBOEJOUFHSBMDMBNQJOH
t&MJNJOBUFTUIFOFFEUPVTFBTDSFXESJWFSUPCSFBLPQFOQSZPVUT
t5IFFBTZBDDFTTFOUSZQPJOUTFSWFTBTBXJSFDMBNQFMJNJOBUJOH
time required to mechanically secure the wire to the box
TP16511
Cat. #
Diameter
Mounting
Method
Capacity
Cu. In.
No. of Clamp
Openings
Unit
Qty.
Wt. Lbs.
Per 100
TP16511
4”
Nails Only
22.5
6
25
21
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
213
Steel Box Accessories
GROUNDING SCREW & PIGTAIL
TP711
TP701
TP704
Cat. #
Description
Std. Pkg.
Unit
Qty.
TP701
TP711
TP704
TP704BULK
Grounding Screw with 8” Insulated No. 12 Stranded Wire
Grounding Screw with 8” Insulated No. 12 Copper Wire
#10-32 x 3/8” Grounding Screw
#10-32 x 3/8” Grounding Screws in Jar
1000
1000
1000
1000
1000
1000
1000
1000
TP704BULK
Wt. Lbs.
Per 100
2.0
2.0
0.5
0.4
LOW PROFILE MOUNTING & DRILLING & TAPPING SCREWS
TP710
Cat. #
STS8BULK
Description
Unit
Qty.
Wt. Lbs.
Per 100
1000
1000
0.5
0.4
Low Profile Screws – Reduces Risk of Sheetrock Bulge
TP710
STS8BULK
#8 x 1/2” L.P. Screws
#8 x 1/2” Self-tapping Screw Jar
GROUNDING CLIP
Steel Boxes
TP706
Cat. #
Description
Std. Pkg.
Unit
Qty.
Wt. Lbs.
Per 100
TP706
For Grounding Switch and Outlet Boxes Using Non-metallic
Sheathed Cables No. 14 and No. 12, with Grounding Wire
1000
100
0.5
OLD WORK CLIP
TP651
Cat. #
Description
Std. Pkg.
Unit
Qty.
Wt. Lbs.
Per 100
TP651
Clips Lock Old Work Steel Switch Boxes Tightly to Wall;
Two Required Per Box
250 Sets
25 Sets
4
REPLACEMENT PARTS
TP900
TP901
TP902
Cat. #
Description
Unit
Qty.
TP900
TP901
TP902
MC-BX Clamp with Screws
One Screw Mounting Ear with Screws
Two Screw Mounting Ear with Screws
200
200
200
214
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Wt. Lbs.
Per 100
17.3
3.2
2.7
Steel Box Accessories
HOLD-IT SWITCH BOX SUPPORTS
FIG. 1
FIG. 2
FIG. 3
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP708
Two Metal Holders for Mounting Old Work Switch Boxes in All Types of Wall Materials
500 Sets
5
SWITCH BOX EXTENSIONS
TP709
Cat. #
Description
TP709*
Fits Snugly Inside All 3” x 2” Width Boxes; Maximum
Adjustable Depth 0.78”; Furnished with Mounting Screws
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
3.5
50
13
*Not UL Listed.
STEEL STUD SAFETY PLATES
Features:
Steel Boxes
tø.FFUTSFRVJSFNFOUPG/BUJPOBM&MFDUSJD$PEF®
tø4BNFTJ[FBTGBDFPGTUVE
tø/POBJMTSFRVJSFE
tø1SPUFDUTFMFDUSJDBMDBCMFBOEDPQQFSXBUFSQJQFT
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP659
2” x 31/8” Steel Plate
100
11
”BACK TO BACK” BOX CONNECTORS –
ZINC DIE CAST
Applications:
t 'PSVTFBTBTIPSUSBDFXBZCFUXFFOUXPCPYFT
t 8JEUIwMFOHUIw
Cat. #
Size
Unit
Qty.
Wt. Lbs.
Per 100
5050
1
/2”
25
8
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
215
Steel Square Boxes
4” SQUARE OUTLET BOXES & COVERS
Applications:
tø'PSVTFXJUIDPOEVJU
Features:
tø*EFBMGPSFYQPTFEXPSLBQQMJDBUJPOTQSPWJEJOHBOFBTZNFUIPEGPS
UIFJOTUBMMBUJPOPGFMFDUSJDBMEFWJDFTTXJUDIFTSFDFQUBDMFTGBOT
MJHIUTFUD
t3BJTFEHSPVOETDSFXMPDBUJPOJOUIFXFMEFECPYFTTBWFTUJNFJO
JOTUBMMBUJPO
t4UBOEBSEXJUIQSFJOTUBMMFEHSPVOETDSFXTBOEBWBJMBCMFXJUI
HSPVOEQJHUBJMTGPSJODSFBTFEMBCPSTBWJOHT
t,OPDLPVUTBSFTVJUBCMFGPSVTFXJUIPVUBCPOEJOHKVNQFSJODJSDVJUT
BCPWFPSCFMPXWPMUT
t"WBJMBCMFJOEJGGFSFOUEFQUITGPSEJGGFSJOHDVCJDDBQBDJUZ
SFRVJSFNFOUT
t8FMEFEPSESBXODPOTUSVDUJPOUPNBUDIDVTUPNFSQSFGFSFODF
t&YUFOTJWFDPWFSPGGFSJOHUPNFFUWBSJPVTDVTUPNFSBQQMJDBUJPOTBOE
OFFET
Certifications and Compliances:
tø$4"-JTUFE
t $4"'JMF/P-3
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY (WELDED)
21.0 CUBIC INCH CAPACITY (DRAWN)
Steel
Boxes
11/2” DEEP – FOR CONDUIT
UL LISTED
CSA LISTED
TP404G
TP425G
TP414G
Knockouts
Cat. #
Metal
Stud
Sizes
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP404G
TP425G
TP423G
TP414G
"MM
"MM
"VP"
7.4
8FMEFE
8FMEFE
8FMEFE
%SBXO
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø3/ ”
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø3/ ”
82
81
216
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Boxes
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2” DEEP
FOR NON-METALLIC CABLE – CLAMPS IN EACH END
UL LISTED
CSA LISTED
TP449G
Knockouts
Cat. #
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP449G
i7.4w
8FMEFE
øø$BCMFøø1/2wøø1/2w3/w&
øø1/2”
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
81
4” SQUARE OUTLET BOXES – 22.0 CUBIC INCH CAPACITY
11/2” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE & HCF CABLE – CLAMPS IN EACH END
UL LISTED
CSA LISTED
TP454G
Steel
Boxes
Knockouts
Cat. #
Bracket
Description
Sides
TP454G*
8FMEFE
øø$BCMFøø1/2wøø1/2w3/w&
6-BQQSPWFEGPSVTFXJUIBMVNJOVNJOUFSMPDLJOHHSPVOEJOHNFUBMDMBEDBCMF5ZQF.$*"4PVUIXJSF.$"1 .$"1™JTBSFHJTUFSFEUSBEFNBSLPG4PVUIXJSF$PNQBOZ
™
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Boxes
4” SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP – FOR CONDUIT
UL LISTED
CSA LISTED
TP403G/TP403PFG
TP434G
TP432G
TP438G
TP451G
Steel
Boxes
Knockouts
Cat. #
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP403G
TP403PFG†
TP432G
TP436G
TP434G
TP438G
TP451G
i7.4w
8FMEFE
8FMEFE
8FMEFE
8FMEFE
%SBXO
%SBXO
8FMEFE
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø3/ ”
øøw
øø1/ 2wøø3/ ”
øø1/ 2wøø1/ 2w3/ w$
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø1/ 2w3/ w&
øø1/ 2wøø3/ ”
øø1/ 2wøø3/ ”
øø1/ 2wøø1/ 2w3/ w&
p51DBUBMPHOVNCFSTFOEJOHJO1'JODMVEFHSPVOETDSFXXJUIQJHUBJMMFBE
218
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Boxes & Covers
4” SQUARE OUTLET BOXES – 30.3 CUBIC INCH CAPACITY
21/8” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE & HCF CABLE – CLAMPS IN EACH END
UL LISTED
CSA LISTED
TP431G
TP440G
Cat. #
Metal
Stud
Sizes
Knockouts
Bracket
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP431G*
TP440G*
"MM
i7.4w
8FMEFE
8FMEFE
øoø$BCMFøoø1/2wøoø1/2w3/w&
øoø$BCMFøoø1/2wøoø1/2w3/w&
øoø1/2”
øoø1/2”
6-BQQSPWFEGPSVTFXJUIBMVNJOVNJOUFSMPDLJOHHSPVOEJOHNFUBMDMBEDBCMF5ZQF.$*"4PVUIXJSF.$"1™
.$"1™JTBSFHJTUFSFEUSBEFNBSLPG4PVUIXJSF$PNQBOZ
4” SQUARE EXTENSION RINGS
11/2” DEEP WITH CONDUIT KNOCKOUTS – 21.0 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KNOCKOUTS – 30.3 CUBIC INCH CAPACITY
UL LISTED
CSA LISTED
Steel
Boxes
TP443 (21/8” Deep)
TP422†
Knockouts
Cat. #
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2wøø1/2w3/w&
øø1/2wøø3/”
øøw
66
Sides
11/2” Deep Switch & Masonry Box Extension Ring
TP422†
21/8” Deep
TP443
TP465
p'PSVTFBTFYUFOTJPOXJUITXJUDICPYOPUGPVSTRVBSFCPY
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
COVERS FOR 4” SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
CSA LISTED
#8-32 Screw Used on Covers
TP472
TP474
TP478
TP487
TP473, TP475,
TP476, TP477,
TP479, TP483
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
Capacity
Cu. In.
TP472
TP474
TP478
TP487
TP473
TP476
TP477
TP475
TP479
TP483
'MBU#MBOL
'MBU0QFOXJUI&BST3/”
'MBUXJUI1/2w,0
'MBUXJUI3/w,0
3BJTFE1/w0QFOXJUI&BST3/”
3BJTFE1/2w0QFOXJUI&BST3/”
3BJTFE/8w0QFOXJUI&BST3/”
3BJTFE3/w0QFOXJUI&BST3/”
3BJTFEw0QFOXJUI&BST3/”
3BJTFE1/w0QFOXJUI&BST3/”
31
21
31
23
26
31
MUD RINGS FOR 4” SQUARE STEEL OUTLET BOXES
Steel
Boxes
UL LISTED
CSA LISTED
TP480
Cat. #
TP482, TP484,
TP486, TP489
TP494
TP488, TP490
TP496, TP499,
TP500, TP501,
TP502
Description
Unit
Qty.
Wt. Lbs.
Per 100
Capacity
Cu. In.
'MBU
/ w3BJTFE
/ 2w3BJTFE
/ 8w3BJTFE
3
/ w3BJTFE
w3BJTFE
11/ w3BJTFE
21
23
26
'MBU
1
/ w3BJTFE
1
/ 2w3BJTFE
/ 8w3BJTFE
3
/ w3BJTFE
11/ w3BJTFE
w3BJTFE
12
13
18
22
31
One Device
TP480
TP482
TP484
TP489
TP486
TP488
TP490
1
1
Two Device
TP494
TP496‡
TP498‡
TP499‡
TP500‡
TP501
TP502
q4MPUUFEEFTJHOGPSVTFXJUIwTRVBSFCPYQBSUJUJPOT
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
4” SQUARE SURFACE COVERS – 5.5 CUBIC INCH CAPACITY
RAISED 1/2”
UL LISTED
CSA LISTED
4DSFXT
QSPWJEFEJOSBJTFEDPWFSLJUBSFGPSVTFXJUIUIFDFOUFSIPMFPOEVQMFYSFDFQUBDMFT/VUTUIBUBSFQSPWJEFEJOLJUBSFUPCFVTFEJO
DPOKVODUJPOXJUIUIFTDSFXTUIBUBSFQSPWJEFEBTTUBOEBSEQBDLBHJOHXJUIEFWJDFTUPNPVOUEFWJDFUPSBJTFEDPWFS'PS('$*EFWJDFJOTUBMMBUJPO
OPTDSFXJTOFFEFEQMFBTFEJTSFHBSE
TP503
TP504
TP506
TP508
TP510
TP512
TP516
TP509 (4 Screws),
TP518 (2 Screws)
TP513
TP511
TP515
TP517
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP503
TP504
TP506
TP508
TP510
TP512
TP507
TP514
TP519
TP516
TP509
TP518
TP513
TP511
TP515
TP517
3BJTFE#MBOL
'PS0OF5PHHMF4XJUDIBOE0OF4JOHMF3FDFQUBDMF113/32”%JB
'PS0OF5PHHMF4XJUDIBOE0OF%VQMFY3FDFQUBDMF
'PS5XP5PHHMF4XJUDIFT
'PS5XP%VQMFY3FDFQUBDMFT
'PS0OF5PHHMF4XJUDI
'PS0OF"NQ4JOHMF3FDFQUBDMF1/32”%JB
'PS0OF4JOHMF3FDFQUBDMF113/32”%JB
'PS0OF"NQ5XJTU-PDL4JOHMF3FDFQUBDMF123/32”%JB
'PS0OF%VQMFY3FDFQUBDMF
'PS0OF"NQ3FDFQUBDMFXJSF
2/16”%JB
'PS0OF"NQ3FDFQUBDMF2/”%JB
'PS0OF('$*3FDFQUBDMF
'PS5XP('$*3FDFQUBDMFT
'PS0OF5PHHMF4XJUDIBOE0OF('$*3FDFQUBDMF
'PS0OF%VQMFY3FDFQUBDMFBOE0OF('$*3FDFQUBDMF
31
31
26
31
23
31
26
31
26
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel
Boxes
Cat. #
TP507, TP514,
TP519
221
Steel Square Covers
TILE WALL COVERS FOR 4” SQUARE BOXES – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
CSA LISTED
TP524
TP534
TP540
Applications:
tø5ZQJDBMMZVTFEXJUIUJMFPSCSJDL
Features:
tø3PVOEFEDPSOFSTIFMQHVJEFDVUTBSPVOEEFWJDFT
Cat. #
Description
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
/2w3BJTFE
/w3BJTFE
w3BJTFE
11/w3BJTFE
11/2w3BJTFE
w3BJTFE
36
62
/2w3BJTFE
/w3BJTFE
w3BJTFE
11/w3BJTFE
11/2w3BJTFE
w3BJTFE
36
66
One Device
TP520
TP522
TP524
TP526
TP528
TP530
1
3
Steel
Boxes
Two Device
TP532
TP534
TP536
TP538
TP540
TP542
222
1
3
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Boxes
411/16” SQUARE OUTLET BOXES & COVERS
Applications:
tø'PSVTFXJUIDPOEVJU
t'PSVTFJODPNNFSDJBMBOEJOEVTUSJBMBQQMJDBUJPOTXIFSFMBSHFS
TJ[FEDPOEVDUPSPSXJSJOHEFWJDFTBSFOFFEFEBOEBEEJUJPOBM
WPMVNFJTSFRVJSFE
Features:
tø*EFBMGPSFYQPTFEXPSLBQQMJDBUJPOTQSPWJEJOHBOFBTZNFUIPEGPS
UIFJOTUBMMBUJPOPGFMFDUSJDBMEFWJDFTTXJUDIFTSFDFQUBDMFTGBOT
MJHIUTFUD
t3BJTFEHSPVOETDSFXMPDBUJPOJOUIFXFMEFECPYFTTBWFTUJNFJO
JOTUBMMBUJPO
t$PODFOUSJDLOPDLPVUTIBWFB1/2wBOE3/wLOPDLPVUJOUIFTBNF
MPDBUJPOGPSDVTUPNFSGMFYJCJMJUZ
t,OPDLPVUTBSFTVJUBCMFGPSVTFXJUIPVUBCPOEJOHKVNQFSJODJSDVJUT
BCPWFPSCFMPXWPMUT
t"WBJMBCMFJOUXPEFQUITGPSEJGGFSJOHDVCJDDBQBDJUZSFRVJSFNFOUT
t8FMEFEPSESBXODPOTUSVDUJPOUPNBUDIDVTUPNFSQSFGFSFODF
t&YUFOTJWFDPWFSPGGFSJOHUPNFFUWBSJPVTDVTUPNFSBQQMJDBUJPOTBOE
OFFET
Certifications and Compliances:
tø$4"-JTUFE
411/16” SQUARE OUTLET BOXES – 29.5 CUBIC INCH CAPACITY
11/2” DEEP WITH CONDUIT KOs
UL LISTED
CSA LISTED
Steel
Boxes
TP548G
TP549G
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP548G
TP549G
%SBXO
%SBXO
øø1/2wøø3/”
øø1/2wøø1/2w3/w$
øø1/2wøø3/”
øø1/2wøø3/”
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
223
Steel Square Boxes & Covers
411/16” SQUARE OUTLET BOXES – 42.0 & 44.0 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KOs
UL LISTED
CSA LISTED
TP563G
TP554G
TP556G
Knockouts
Cat. #
Description
TP560G
TP558G
Bracket
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2wøø1/2w3/w$
øø3/”
øø1/2wøø3/”
øø3/wøøw
øøw
øø1/2wøø3/”
øø1/2wøø3/”
øø1/2wøø3/”
øø1/2wøø3/”
øø1/2wøø3/”
42.0 Cubic Inch Capacity
TP563G
TP554G
TP556G
TP558G
TP560G
%SBXO
%SBXO
%SBXO
%SBXO
%SBXO
411/16” SQUARE EXTENSION RINGS
11/2” DEEP WITH CONDUIT KOs – 29.5 CUBIC INCH CAPACITY
21/8” DEEP WITH CONDUIT KOs – 42.0 CUBIC INCH CAPACITY
Steel
Boxes
UL LISTED
CSA LISTED
TP550
TP564
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/ 2wøø3/ ”
66
øø1/ 2wøø3/ ”
11/2” Deep – 29.5 Cubic Inch Capacity
TP550
2 /8” Deep – 42.0 Cubic Inch Capacity
1
TP564
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Square Covers
411/16” SQUARE COVERS – CUBIC INCH CAPACITY (SEE BELOW)
UL LISTED
CSA LISTED
TP568
Cat. #
TP574 - TP582,
TP529, TP531
TP572
TP584, TP586, TP589,
TP593, TP541, TP543
Description
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
'MBU#MBOL
'MBUXJUI1/2w,0
/w3BJTFE
/2w3BJTFE
3
/w3BJTFE
/8w3BJTFE
w3BJTFE
11/w3BJTFE
11/2w3BJTFE
w3BJTFE
32
36
'MBU
/w3BJTFE
/2w3BJTFE
/8w3BJTFE
3
/w3BJTFE
w3BJTFE
11/w3BJTFE
11/2w3BJTFE
w3BJTFE
21
26
32
38
63
Flat and Raised
TP568
TP572
One Device
TP574
TP576
TP578
TP579
TP580
TP582
TP529
TP531
1
1
Two Device
1
1
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel
Boxes
TP590
TP583
TP584
TP587
TP586
TP589
TP593
TP541
TP543
Steel Square Covers
411/16” SQUARE SURFACE COVERS – 9.0 CUBIC INCH CAPACITY
/2” RAISED
1
Steel
Boxes
CSA LISTED
TP720
TP722
TP724, TP730,
TP736
TP726
TP728
TP732
TP734
TP738
TP740
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP720
TP722
TP724
TP730
TP736
TP726
TP728
TP732
TP734
TP738
TP740
TP741
'PS0OF5PHHMF4XJUDI
'PS0OF%VQMFY3FDFQUBDMF
'PS0OF4JOHMF3FDFQUBDMF113/32”%JB
'PS0OF"NQ4JOHMF3FDFQUBDMFw%JB
'PS0OFw%JB1PXFS0VUMFU
'PS5XP5PHHMF4XJUDIFT
'PS5XP%VQMFY3FDFQUBDMFT
'PS0OFw%JB3BOHF%SZFS3FDFQUBDMF
'PS0OFw%JB1PXFS0VUMFU
'PS0OF(SPVOE'BVMU*OUFSSVQUFS
'PS0OF('*3FDFQUBDMFBOE0OF5PHHMF
'PS5XP('*3FDFQUBDMFT
226
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Utility Boxes & Covers
UTILITY BOXES – CUBIC INCH CAPACITY (SEE BELOW)
4” LONG x 21/8” WIDE
UL LISTED
CSA LISTED
TP588G
TP594G, TP596G
TP604G, TP606G
Knockouts
Cat. #
Bracket
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
øø1/2”
øø3/”
øø1/2”
øø1/2”
øø1/2”
øø3/”
øø1/2”
øø1/2”
11/2” Deep – 10.3 Cubic Inch Capacity
TP588G
1 /8” Deep – 13.0 Cubic Inch Capacity
7
TP594G
TP596G
21/8” Deep – 14.5 Cubic Inch Capacity
TP604G
TP606G
UTILITY BOX COVERS
UL LISTED
CSA LISTED
Steel
Boxes
TP608
TP610
TP612
TP613
TP614
TP616
Cat. #
Description
Unit
Qty.
Wt. Lbs.
Per 100
TP608
TP610
TP612
TP613
TP614
TP616
TP618
#MBOL
'PSBOE"NQ5XJTU-PDL/32w%JB
4JOHMF3FDFQUBDMF13/32w%JB
'PS('$*%FWJDF
1
/2w,0
%VQMFY3FDFQUBDMF
0OF5PHHMF4XJUDI
8
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
TP618
Steel Switch Boxes
11/2” DEEP – NON-GANGABLE – 7.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
CSA LISTED
TP100G
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø$BCMF
øø1/2”
For Non-metallic Cable – Clamps in Each End
TP100G
:FT
2” DEEP – GANGABLE – 10.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
Steel
Boxes
UL LISTED
CSA LISTED
TP130G
TP132G
TP131G Hold-Tite
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
:FT
:FT
øø1/2”
øø1/2”
øø1/2w5
øø1/2”
øø1/2w4JEF
øø1/2”
øø1/2”
øø1/2”
For Conduit – No Clamps, Flush Device
TP130G
TP132G
TP131G
228
i4w4FU/8”
)PME5JUF
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
21/4” DEEP – GANGABLE – BEVELED CORNERS – 10.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
CSA LISTED
TP137G Hold-Tite
TP138G
Knockouts
Cat. #
Description
Ears
Bumps
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
$BCMF
$BCMF
øø1/2”
øø1/2”
Clamp Screws Through Beveled Corners
TP137G
TP138G
(BOHBCMF
(BOHBCMF
:FT
:FT
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
UL LISTED
CSA LISTED
Cat. #
Bracket
TP163G
Ears
TP164G, TP168G
Ground
Pigtail
Leveling
Bumps
TP161G
Knockouts
Steel
Boxes
TP162G
TP171G
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø$BCMF
øø$BCMF
øø$BCMF
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
62
For Non-metallic Cable – Clamps in Each End
TP161G
TP162G
TP163G
TP164G
TP168G
TP171G
4OBQJO
)PME5JUF
i'w4FU1/2”
i'w4FU1/”
i71w4FU1/2”
:FT
:FT
:FT
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG FOR ARMOURED & METAL-CLAD (MCI) CABLE – CLAMPS IN EACH END
UL LISTED
CSA LISTED
TP180G
TP185G
Knockouts
Cat. #
Bracket
Ears
Each End
Each Side
TP180G*
TP185G*
i'w4FU1/2”
i71w4FU1/2”
øø$BCMFøø1/2” øø1/2”
øø$BCMFøø1/2” øø1/2”
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
6-BQQSPWFEGPSVTFXJUIBMVNJOVNJOUFSMPDLJOHHSPVOEJOHNFUBMDMBEDBCMF5ZQF.$*"4PVUIXJSF.$"1™
.$"1™JTBSFHJTUFSFEUSBEFNBSLPG4PVUIXJSF$PNQBOZ
21/2” DEEP – GANGABLE – 12.5 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR CONDUIT – NO CLAMPS
UL LISTED
Steel
Boxes
CSA LISTED
TP214G
Cat. #
Bracket
Ears
Leveling
Bumps
TP214G
TP218G
TP222G
i4w4FU/8”
:FT
:FT
www.crouse-hinds.com
US: 1-866-764-5454
TP222G
TP218G
Knockouts
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2w4JEF
øø1/2”
øø1/2”
øø1/2”
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Switch Boxes
31/2” DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR NON-METALLIC CABLE – CLAMPS IN EACH END
UL LISTED
CSA LISTED
TP242G
TP238G
Knockouts
Cat. #
Bracket
Ground
Pigtail
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP238G
TP242G
i4w4FU/8”
:FT
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
øø1/2”
øø1/2”
31/2” DEEP – GANGABLE – 18.0 CUBIC INCH CAPACITY
2” WIDE x 3” LONG
FOR CONDUIT – NO CLAMPS
UL LISTED
CSA LISTED
TP254G
Bracket
Ears
Each End
Each Side
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP254G
:FT
øø3/”
øø3/”
øø1/2”
Steel
Boxes
Knockouts
Cat. #
11/2” DEEP SWITCH & MASONRY BOX EXTENSION RING
TP422†
Knockouts
Cat. #
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
11/2” Deep Switch & Masonry Box Extension Ring
TP422†
øø1/2wøø1/2w3/w&
p'PSVTFBTFYUFOTJPOXJUITXJUDICPYOPUGPVSTRVBSFCPY4FFQBHFGPSwTUFFMTRVBSFDPWFST
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
231
Steel Octagon Boxes & Ceiling Pans
4” ROUND CEILING PANS* – 6.0 CUBIC INCH CAPACITY
1
/2” DEEP
FIXTURE RATED
UL LISTED
CSA LISTED
TP269G
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP269G
,0T0OMZ
øø1/2”
8FJHIUMJNJUGPS1/wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSF/PUTVJUBCMFGPSGBOT
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
Steel
Boxes
UL LISTED
CSA LISTED
TP276G
TP274G, TP278G
TP280G
Knockouts
TP282G
TP284, TP286
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP274G
TP276G
TP278G
TP280G
TP282G
i$w#SBDLFU
i4w#SBDLFU4FU1/2”
øø1/2”
øø3/”
øø1/ 2wøø3/”
øø1/2”
øø1/2”
øø1/2”
øø1/2wøø3/”
øø1/2wøø3/”
øø1/2”
øø1/2”
36
36
Octagon Extension Rings – (Slot & Key Permit Mounting without Removing Box Screws)
TP284
TP286
øø1/2”
øø1/2wøø3/”
p8FJHIUMJNJUGPS1/ wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSFMVNJOBJSF/PUTVJUBCMFGPSGBOT
232
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Steel Octagon Boxes & Ceiling Pans
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR ARMOURED & METAL-CLAD (MCI) CABLE – CLAMPS IN EACH END
FIXTURE RATED
UL LISTED
CSA LISTED
TP310G
TP312G
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP310G*
TP312G*
i$w#SBDLFU
øø$BCMFøø1/2”
øø$BCMFø1/2”
øø1/2”
øø1/2”
66
6-BQQSPWFEGPSVTFXJUIBMVNJOVNJOUFSMPDLJOHHSPVOEJOHNFUBMDMBEDBCMF5ZQF.$*"4PVUIXJSF.$"1™
.$"1™JTBSFHJTUFSFEUSBEFNBSLPG4PVUIXJSF$PNQBOZ
p8FJHIUMJNJUGPS1/ wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSFMVNJOBJSF/PUTVJUBCMFGPSGBOT
4” OCTAGON OUTLET BOXES† – 15.5 CUBIC INCH CAPACITY
11/2” DEEP
FOR NON-METALLIC CABLE – WITH CLAMPS
FIXTURE RATED
UL LISTED
CSA LISTED
Steel
Boxes
TP300G
TP302G
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
TP300G
TP302G
8JUI4JEF/BJM)PMFT
i$w#SBDLFU
øø$BCMFøø1/2”
øø$BCMFøø1/2”
øø1/2”
øø1/2”
p8FJHIUMJNJUGPS1/wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSFMVNJOBJSF/PUTVJUBCMFGPSGBOT
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
233
Steel Octagon Boxes & Ceiling Pans
4” OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
21/8” DEEP
FOR CONDUIT – NO CLAMPS
FIXTURE RATED
UL LISTED
CSA LISTED
TP288G, TP290G, TP294G
TP292G
Knockouts
Cat. #
Description
Sides
TP288G
TP290G
TP292G
TP294G
øø1/2”
øø3/”
øø1/2wøø3/”
øøw
Bottom
øoø1/2wøoø3/”
øoø1/2wøoø3/”
øoø1/2wøoø3/”
øoø1/2wøoø3/”
Unit
Qty.
Wt. Lbs.
Per 100
p8FJHIUMJNJUGPS1/ wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSFMVNJOBJSF/PUTVJUBCMFGPSGBOT
4” OCTAGON OUTLET BOXES† – 21.5 CUBIC INCH CAPACITY
21/8” DEEP – WITH CABLE CLAMPS
FIXTURE RATED
UL LISTED
Steel
Boxes
CSA LISTED
TP318G
Knockouts
Cat. #
Description
Sides
Bottom
Unit
Qty.
Wt. Lbs.
Per 100
i$w#SBDLFU
øø$BCMFøø1/2”
øø1/2”
88
For Non-metallic Cable
TP318G
p8FJHIUMJNJUGPS1/wBOEw0DUBHPO0VUMFU#PYFTBOE$FJMJOH1BOTJTMCTGPSGJYUVSFMVNJOBJSF/PUTVJUBCMFGPSGBOT
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
PVC Switch Boxes
Applications:
Non-metallic Switch and Outlet Boxes are used:
t*OCSBODIDJSDVJUXJSJOHBTBTQMJDFQPJOU
t5PNPVOUXJSJOHEFWJDFTTVDIBTTXJUDIFTBOESFDFQUBDMFT
t5PQSPWJEFNFDIBOJDBMQSPUFDUJPOGPSXJSJOHTZTUFNTBOEFMFDUSJDBM
EFWJDFT
Features:
tø"WBJMBCMFGPSVTFXJUIXPPEPSNFUBMTUVETUPNFFUBOZ
DPOTUSVDUJPOQSFGFSFODF
t2VJDLFOUSZGFBUVSFPOBMMOPONFUBMMJDCPYFTPGGFSTMBCPSTBWJOHT
oOPOFFEUPCSFBLPVULOPDLPVUToTJNQMZQVTIUIFOPONFUBMMJD
DBCMFJOUPUIFCPYOPUPPMTBSFSFRVJSFEOPOFFEUPSFNPWF
LOPDLPVUT
t6OJRVFDPOGJHVSBUJPOPGUIJTRVJDLFOUSZGFBUVSFPOTJOHMFHBOH
CPYFTQSPWJEFTBTFMGGFFEJOHGFBUVSFUIBUFMJNJOBUFTUIFOFFEUP
SFBDIJOTJEFUIFCPYUPQVMMUIFXJSFPVU
t*OUFHSBMMBCPSTBWJOHDMBNQJOHGFBUVSFPOUXPUISFFBOEGPVSHBOH
CPYFTUIFNVMUJQMFHBOHCPYVOJRVFFOUSZBMTPTFSWFTBTBDMBNQ
FMJNJOBUJOHUIFOFFEUPNFDIBOJDBMMZTFDVSFUIFDBCMFJOTJEFUIF
CPY
t 5IFSFBSFOPTFQBSBUFDMBNQTPSTDSFXTUPJOTUBMMPSUJHIUFOFBDI
FOUSZJOUPUIFNVMUJQMFHBOHCPYFTIBTUIFRVJDLFOUSZGFBUVSF
BMMPXJOHUIFJOTUBMMFSUPTJNQMZQVTIUIFDBCMFJOUPUIFCPYXJUIPVU
UIFOFFEGPSUPPMTPSSFNPWBMPGLOPDLPVUTTPUIFDBCMFDBOCF
JOTFSUFEXIFSFJUJTSFRVJSFE
Certifications and Compliances:
tø6-'JMF/P&
t$MBTTJGJFEGPSVTFJOGJSFSBUFE)3
XBMMPSDFJMJOH'JSF3BUJOH/P
3
Standard Materials:
tø17$1PMZWJOZM$IMPSJEF$PNQPVOE
SWITCH BOXES – ANGLED NAILS
UL LISTED
TP1800
TP2000
TP2300
Bracket or
Nails
Capacity
Cu. In.
H
W
D
Unit
Qty.
Wt. Lbs.
Per 100
TP1800
TP2000
TP2300
Nails
Nails
Nails
33/ 4”
33/ 4”
33/ 4”
2/ 4”
2/ 4”
2/ 4”
23/ 4”
33/ ”
37/ ”
23
25
27
PVC Boxes
Cat. #
SWITCH BOXES – INTEGRAL CLAMPS
UL LISTED
TP1690
(Old Work)
TP2030
(For Wood or Metal Studs)
Cat. #
Bracket or
Nails
Capacity
Cu. In.
H
W
D
Unit
Qty.
Wt. Lbs.
Per 100
TP1690
TP2030
4XJOH$MJQTBOE*OUFHSBM$MBNQT
'BDF#SBDLFU/ 2w0GGTFU
35/ ”
3/ ”
25/ ”
2/ 4”
23/ 4”
33/ ”
24
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
235
PVC Switch Boxes
3” DEEP SWITCH BOXES – TWO GANG
UL LISTED
TP3490
(Old Work)
TP3600
TP3635
Cat. #
Bracket or
Nails
Capacity
Cu. In.
H
W
D
Unit
Qty.
Wt. Lbs.
Per 100
TP3490
TP3600
TP3635*
4XJOH$MJQT
Nails
#SBDLFUTBOE/BJMT
3/ ”
33/ 4”
33/ 4”
4”
4”
4”
33/ ”
3”
3”
25
37
42
'BDFCSBDLFUPO17$#PYFTBSFPGGTFU/ 2wVOMFTTTUBUFEPUIFSXJTF
211/16” DEEP SWITCH BOXES – THREE GANG
UL LISTED
TP4600
TP4635
Cat. #
Bracket or
Nails
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP4600
TP4635*
Nails
#SBDLFUTBOE/BJMT
25
45
PVC Boxes
'BDFCSBDLFUPO17$#PYFTBSFPGGTFU/ 2wVOMFTTTUBUFEPUIFSXJTF
211/16” DEEP SWITCH BOXES – FOUR GANG
UL LISTED
TP6180
Cat. #
Bracket or
Nails
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP6180†
/BJMTBOE#BS4VQQPSU
25
p/PUUXPIPVSGJSFSBUFE
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
PVC Switch Boxes
LOW VOLTAGE PARTITION – TWO, THREE OR FOUR GANG PVC
TP1000, TP1001
Cat. #
Use with the Following Boxes
Unit
Qty.
Wt. Lbs.
Per 100
TP1000
TP1001
5151
51515151
3
4
PVC Boxes
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
237
PVC Switch Boxes & Covers
4” SQUARE WITH INTEGRAL CLAMPS – 18.0 CUBIC INCH CAPACITY
15/8” DEEP
UL LISTED
TP1900
Cat. #
Bracket
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP1900
Yes
75
4” SQUARE PVC DEVICE COVERS
UL LISTED
TP1013
TP1023
Cat. #
Raised
Capacity
Cu. In.
Unit
Qty.
Wt. Lbs.
Per 100
TP1013
TP1023
/ 2”
/ 2”
PVC Boxes
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Ceiling Boxes
31/2” NON-METALLIC CEILING BOXES – PVC
27/8” DEEP
UL LISTED
Weight limit: 50 lbs. for fixture except where indicated.
TP16200,
(TP16201 – 21/8” Deep)
Old Work
TP16201
TP16311
Cat. #
Clamps
Ground
Plate
Bracket/
Bar Hanger
Capacity
Cu. In.
No. of Clamp
Openings
Unit
Qty.
Wt. Lbs.
Per 100
TP16200†
TP16201†
TP16311*
Yes
Yes
Yes
Yes
Yes
Snap
Snap
Nails
16.0
16.0
20.0
4
4
4
50
50
75
27
29
20
*Nail bracket is set 19/16” back from the face of the box.
†Weight limit is 6 lbs. for wall mounted fixtures only.
Ceiling Boxes
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
239
Ceiling Boxes
4” NON-METALLIC CEILING BOXES – PVC
21/4” DEEP
UL LISTED
Weight limit: 50 lbs. for fixture except where indicated.
TP16111, TP16110
TP16122, TP16123
Cat. #
Clamps
Ground
Plate
Bracket/
Bar Hanger
Capacity
Cu. In.
No. of Cable
Pry-outs
Unit
Qty.
Wt. Lbs.
Per 100
TP16111
TP16110
TP16122
TP16123
Yes
Yes
Yes
Yes
Yes
Yes
Nails
Nails
14” - 16”
14” - 16”
20.3
20.0
20.8
20.8
4
4
4
4
75
75
20
20
19
21
59
61
NON-METALLIC CEILING FAN BOXES
23/16” DEEP
UL LISTED
With clamps for non-metallic cable.
All mounting hardware supplied; suitable for support of fans weighing up
to 35 lbs.
Features:
Ceiling Boxes
tø.BEFPGIFBWZEVUZFOHJOFFSFEUIFSNPQMBTUJDNBUFSJBM
t0GGFSTUIFMBCPSTBWJOHGFBUVSFPGRVJDLFOUSZBOEJOUFHSBMDMBNQJOH
t&MJNJOBUFTUIFOFFEUPVTFBTDSFXESJWFSUPCSFBLPQFOQSZPVUT
t5IFFBTZBDDFTTFOUSZQPJOUTFSWFTBTBXJSFDMBNQFMJNJOBUJOH
UJNFSFRVJSFEUPNFDIBOJDBMMZTFDVSFUIFXJSFUPUIFCPY
TP16511
Cat. #
Diameter
Mounting
Method
Capacity
Cu. In.
No. of Clamp
Openings
Unit
Qty.
Wt. Lbs.
Per 100
TP16511
4”
/BJMT0OMZ
22.5
6
25
21
240
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
Ceiling Boxes
CEILING FAN BOXES – PVC
UL LISTED
8FJHIUMJNJUTGBOTBOEGJYUVSFTBSFTVQQPSUFEJOEFQFOEFOUPGPVUMFUCPY.PVOUJOHTDSFXTHPUISPVHICPYBOEJOUPKPJTU
#PYXJMMTVQQPSUVQUPMCTGPSGBOTBOEMCTGPSGJYUVSFT1SPWJEFEXJUI3PNFYDPOOFDUPS
Applications:
tø'PSVTFXJUIXPPETUVETPOMZ
TP1300
Capacity
Cu. In.
Cat. #
Description
TP1300
41/16w%JB1/2w%FFQ1BO4FDUJPOw%FFQ0WFSBMMo
XJUI.UH)BSEXBSFBOE&YUFSOBM$MBNQ1SPUFDUJWF 14.0
$PWFS
Knockouts
Integral
Clamp
Unit
Qty.
Wt. Lbs.
Per 100
øø1/2”
1
24
34
ROUND BLANK COVER – PVC
43/4” DIA. (FOR 31/2” & 4” ROUND CEILING BOXES)
TP1040
Cat. #
Color
Screws
Unit
Qty.
Wt. Lbs.
Per 100
TP1040
Gray
-
100
10
Ceiling Boxes
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2015 Commercial Products Catalog
241