Runway and Taxiway Inset Lights
PRO APF Series
STPI/IHPI-LED, ICAO
Stopbar/ Intermediate Holding Position Light
Compliances:
ICAO Annex 14 Vol. 1 and Part 4
IEC: TS 61827
NATO: STANAG 3316
FAA: AC 150/5345-46: Current Edition*
FAA: EB67 Current Edition
RoHS and CE
* Complies with all structural and environmental requirements.
Applications
The STP fixtures are used for
runway incursion protection and
traffic control on taxiways just
before active runways. They are
required for SMGCS operations. This
unidirectional LED light is designed
for use in all weather conditions.
The IHP is an intermediate holding
position light used to mark a holding
position that has been established to
protect a priority route. The IHP is a
unidirectional yellow light with 12W
power consumption.
Features
ƒ New Wavetrac™ technology
reduces power consumption up
to 80% compared to incandescent
ƒ Long life LED technology with
rated projected life greater than
50,000h at 6.6A
ƒ Dust and water tight to IP 68
ƒ Modular design makes fixtures
easy to maintain with fewer
parts to stock
ƒ Engineering Brief 67 current
edition compliant dimming curve
ƒ High frequency 400Hz PWM helps
eliminate flicker perception
ƒ Compatible with all known
CCR types*
ƒ 3.5 Crest factor ensures
compatibility with Series CCRs
ƒ 10kV/5kA surge protection
ƒ -40C to +85C operating
temperature ensures safe
movement of aircraft in the
most challenging locations
ƒ Failure monitoring of fixtures
ƒ 0.88 second switch-on time
ƒ IEC Style 3, 6-13mm low
protusion housing
ƒ Low Profile, < .25˝ (6.35mm) –
FAA Style 3
ƒ Optional arctic kit (patent pending)
ƒ Typical initial fixture turn
on voltage of 1.5V
Ordering Information
I - A P 1 -
N - 1
- 0 8
- P 1 -
-
Fixture Type:
STPI = Stopbar
IHPI = Intermediate Hold
Position
Series Version:
AP1 = ProAPF1
Color:
R/N = Red/No Light Source (STPI Only)
Y/N = Yellow/No light Source(IHPI Only)
ICAO Figure:
12 = Wide Beam, Cat III, ICAO fig A2-12 (IHPI Only)
13 = Narrow Beam, Cat III, ICAO fig A2-13
14 = Curved Sections, Cat III, ICAO fig A2-14
15 = Wide Beam , Cat II, CAO fig A2-15
16 = Curved Sections, Cat II, ICAO fig A2-16
Fixture Dimension:
08S = IEC compliant 203mm/8inch straight
08R = IEC compliant 203mm/8inch right-toe
08L = IEC compliant 203mm/8inch left-toe
R and L options for ICAO figures 2-14 and 2-16 only (no straight option)
Plug Options:
P1 = One plug
Heater Options:
0 = No options
1 = Arctic kit
Gasket Options:
0 = No options
1 = Gasket 1 (C.H. Canister #22537)
Contact factory for other gasket sizing
* Operates with Thyristor (Series) CCRs across 6 or 8 steps for ICAO
1.44
www.crouse-hinds.com/airportlighting
Outline Drawings
Dimensions:
Inches
(mm)
Instruction Manual:
1136
Shipping Weight:
5.4 lbs.
2.44 kg.
Shipping Volume:
.17 cu. ft.
.004 m3
* Order base separately
Photometric Data
Figure 2-12
Figure 2-13
Figure 2-15
Figure 2-16
Figure 2-14
Fig
Type
Color
Power VA
Unidirectional
Transformer*
Power Factor at
All Steps
2-12
IHPI
Y
10.1
10W/15W
0.99
2-13
IHPI
Y
6.9
10W/15W
0.99
2-13
STPI
R
7.1
10W/15W
0.99
2-14
IHPI
Y
9.4
10W/15W
0.99
2-14
STPI
R
9.8
10W/15W
0.99
2-15
IHPI
Y
7.9
10W/15W
0.99
2-15
STPI
R
7.5
10W/15W
0.99
2-16
IHPI
Y
7.9
10W/15W
0.99
2-16
STPI
R
8.1
10W/15W
0.99
* Use 30W/45W with the Arctic Kit Option.
Accessories & Renewal Parts
Item Description
LED Module Replacements –
Fig A2-12/Fig A2-15 Yellow Module
LED Module Replacements – Fig A2-15 Red Module
LED Module Replacements – Fig A2-13 Yellow Module
LED Module Replacements – Fig A2-13 Red Module
LED Module Replacements –
Fig A2-14/Fig A2-16 Yellow Module
LED Module Replacements –
Fig A2-14/Fig A2-16 Red Module
Lens Replacements – Fig A2-12, A2-13, A2-15
Lens Replacements – Fig A2-14, A2-16
Home Office: United States – +1 860-683-4300
International Offices: Canada • China • Dubai • Mexico • Brazil
Catalog Number
21664-F212-F215-Y
21664-F215-R
21664-F213-Y
21664-F213-R
21664-F214-F216-Y
21664-F214-F216-R
21642-C
21643
Item Description
Catalog Number
Lens Replacements, Arctic Kit Option
Fig A2-12, A2-13, A2-15
Lens Replacements, Arctic Kit Option Fig A2-14, A2-16
Power Supply Replacement Kit
Power Supply Replacement Kit Arctic Kit Support
Feed through Assembly
O-Ring, Optical Housing
External Seal Gasket, 165mm bore
External Seal Gasket, 167.9mm bore
External Seal Gasket, 168.7mm bore
2 Piece Lock Washer Kit, Qty 2
21644-1
21644-2
21645-1
21645-2
21122
10035-62
21612
21613
21614
21647-2
1.45