Technical Data TD032076EN
Effective September 2014
PS-600-24-M1 Solar Power Supply
600V solar combiner box power supply for string monitoring solutions
Description
The PS-600-24-M1 Solar Power Supply is a fully isolated, highvoltage DC power supply for solar photovoltaic (PV) energy industry
applications. A wide input voltage range of 200–600 Vdc gives
installers the flexibility to implement small to medium solar PV string
solutions without the need for low-voltage communications cabling.
Capable of constant 24 Vdc output in rapidly changing solar
irradiance conditions, the power supply includes a linear, galvanically
isolated input voltage monitor output that can interface with
telemetry or SCADA systems, eliminating the need for a separate
voltage transducer module.
Integration of the voltage monitor conserves space in the combiner
box, reduces construction and wiring time, and simplifies installation.
Features
•
200–600 Vdc input voltage range
•
Up to 2A output current
•
Built-in isolated input monitor circuit
•
2500 Vac input and output galvanic isolation
•
UL 1741 compliance
•
Compact DIN-rail mounting
•
Input under/over voltage protection
•
Input reverse polarity protection
•
Output voltage adjustment 22–26 Vdc
•
Output crowbar for over-voltage load protection
•
Output overload and short-circuit protection
•
Fanless convection cooling
Technical Data TD032076EN
PS-600-24-M1 Solar Power Supply


Effective September 2014
Specifications
SPECIFICATION
Input and Output
Input
Output
Protection
Input monitor
Output Monitor
Compliance
Safety
EMC
UL
DESCRIPTION
SPECIFICATION
Voltage: 200–600 Vdc
Current: <0.7A @ 200 Vdc
Galvanic isolation: 2500V RMS (1 min)
Nominal voltage: 24 Vdc, min load 0A, max load 2A a
Adjustment range: 22–26 Vdc
Output tolerance: ± 1% b, ripple/noise max 200 mV c
Efficiency (typ): 82%, max output 48W
Galvanic isolation: 2500V RMS (1 min)
Output over voltage: 36 Vdc
Output over load at 150% of rated load
Output short-circuit protection
Shutdown protection when input voltage <180 Vdc
Shutdown protection when input voltage >610 Vdc
Linear output (1.25–5V) for 200–600V input voltage
Galvanic isolation: 2500V RMS (1 min)
Clean contact relay, closed for OK (3A, 30 Vdc, 250 Vac)
UL 1741, EN 60950-1:2006, Standard
EN 55022 (Class B), FCC Part 15 (Class B), EN 55024,
EN 61000-4-2,3,4,5,6,8
UL Approved
General
Temperature
Humidity
Mounting
Weight
Dimensions
DESCRIPTION
–40 to +158°F (–40 to +70°C), operating
–40 to +185°F (–40 to +85°C), storage
20–90% RH noncondensing, operating
10–95% RH noncondensing, storage
DIN rail, open frame style
1.1 lbs (0.50 kg)
6.3" x 3.7" x 1.5" (159 mm x 95 mm x 38 mm)
NNote: Specifications are subject to change.
NNote: Unless otherwise noted, all measurements are based on 420 Vdc
input, output max at ambient 77°F (25°C) and 70% RH.
a At temperatures below –4°F (–20°C) and above 122°F (50°C), max output is derated to 60%
of full load.
b Output tolerance includes setup voltage, line regulation, and load regulation.
c Ripple/noise is measured at 250–1000 Vdc input with 50–122°F (10–50°C).
Ordering
PRODUCT CODE
PS-600-24-M1
DESCRIPTION
Solar power supply, 600 Vdc to 24 Vdc, 48W
voltage monitor output
Product Compatibility
See your product data sheet for information about compatibility of
the PS-600-24-M1 power supply with your application.
Eaton’s wireless business
www.eaton.com/wireless
North America & Latin America
5735 W. Las Positas Suite 100
Pleasanton, CA 94588
United States
Telephone: +1 925 924 8500
Australia, New Zealand
9/12 Billabong Street
Stafford Queensland 4053
Australia
Telephone: +61 7 3352 8600
Southeast Asia
2 Serangoon North Avenue 5
# 06-01 Fu Yu Building, 554911
Singapore
Telephone: +65 6645 9888
Europe
Hein-Moeller-Straße 7-11
53115 Bonn, Germany
Telephone: +49 228 602 5573
China
955 Shengli Road
East Area of Zhangjiang High-Tech Park
Shanghai, 201201
China
Telephone: +86 21 2899 3600
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. TD032076EN
September 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.