MWS SYSTEM STARTERS
STARTER FIXTURE CABLE SF
The MWS Starter Fixture Cable (SF)
starts the MWS circuit immediately at
the electrical junction box or switch box
and continues to the first lighting fixture.
Subsequent fixtures connected to the
Starter Fixture Cable are wired with
standard Fixture Cables (FC).
120V/ 277V/ 347V
1 2 0 V / 2 7 7 V / 3 4 7 V – 2 C I R C U I T, 2 N E U T R A L
The line side connector installs into any 1/2"
knockout and has 6" leads to connect to the
fixture wiring.
• Positive fixture locking clip locks into any
1/2" knockout and is self grounding to the
fixture or access plate.
• Tap leads to the fixture come standard
with poke home connectors for fast
termination to fixture leads.
Note: Ground wire to fixture included with GW option.
M W S S TA R T E R F I X T U R E C A B L E
• The whip end of the Starter Fixture Cable
is supplied with a 1/2" MC cable fitting and
6" #18 leads pre-stripped for easy
termination to building wiring.
All unused outlets require a MWS dust
cover. MWS ST, SP, SD, CT and TC are
shipped with one dust cover attached.
O R D E R I N G I N F O R M AT I O N
S A MP L E N U M BER : 2 7 S F 1 2 / 2 G 0 9
SF
Voltage
1 2=120V
2 7=277V
3 4=347V
Conductors and Size
1 2 / 2 G=#12, 2 Conductor Plus Ground
1 2 / 3 G=#12, 3 Conductor Plus Ground
1 2 / 4 G=#12, 4 Conductor Plus Ground
Component
SF=Starter
Fixture Cable
S t a rter fixture cables available in #12 AWG only, rated at 20 amperes.
N OT E Specifications and Dimensions subject to change without notice.
Cable Length
09=9 ft .
15= 15 ft .
21=21 ft.
Options
2 N=2 Circuit, 2 Neutral
( 12/4G only)
S H I P P I N G I N F O R M AT I O N
Cable
Length
Unit
Wt.
9'
15'
21'
3.0 lbs.
4.5 lbs.
6.3 lbs.
Standard
Qty./Carton
9
6
4