Reclosers
Reference Information
Kyle Form 4C Recloser Control
Serial Communications
®
R280-90-16
DNP3 Device Profile
Device Profile Template
Data Dictionary
Release 2.0
January 30, 2001
For Use With
Cooper Power Systems
Form 4C Recloser Controls
December 2003 • Supersedes 10/01
Printed in USA
Contents
INTRODUCTION ................................................................................................................................3
DATA DICTIONARY OVERVIEW........................................................................................................4
DNP RELATED CONFIGURATION PARAMETERS...........................................................................13
DNP ERROR INDICATIONS .............................................................................................................16
REFERENCES................................................................................................................................. 18
APPENDIX A: F4C DNP 3.0 DEVICE PROFILE TEMPLATE...............................................................19
APPENDIX B: F4C DNP 3.0 DATA DICTIONARY...............................................................................24
2
Introduction
The F4C Recloser Control is available with the DNP 3.0 communication protocol the
“realtime”serial port. This document provides details for users that need to interface to
the control using this protocol.
The document is divided into sections that give an overview of the data dictionary for the
control, describe configuration parameters to get started communicating, error indication
definitions, and reference documents. Appendices provide the DNP 3.0 Device Profile
Template filled out for the F4C control and the data dictionary for accessing the control.
Unsolicited Report by Exception can be configured as either “supported” or
“unsupported” via a configuration parameter. If supported, upon device reset a null
unsolicited message is sent. No further unsolicited messages will be sent until a DNP
messages to enable unsolicited operation is received by the control.
Data link and Application retries and timeouts are configurable. See the section DNP
Related Configuration Parameters for more detail.
F4C Communications
Introduction ∞ 3
Data Dictionary Overview
Appendix B contains a listing of the data dictionary for the F4C Recloser Control. This
section discusses items of interest from the data dictionary.
Class 0 and 1 Binary Inputs
1.
All binary input events are fixed as Class 1 data.
2.
Event data is updated immediately on every change.
Class 0 through 3 Counters
1. When an incoming request specifies 32-bit counters, only the lower 16 bits of
the counters will be meaningful.
2. Event data is updated on a 1 second basis.
Class 0 through 3 Analog Inputs
1. The data dictionary section that describes the analogs includes scale factors
(for 16 bit variation) and units to translate the raw data.
2.
Event data is updated on a 1 second basis.
Control Relay Output Block (CROB)
1. The data dictionary CROB section indicates whether the control point is
pulsed or latched.
2. The section also specifies the default condition of a point on powerup or
reset.
3. Points may only be controlled using SBO as shown on the table.
File ID objects in general
1. Internal objects (records) consist of static read-only data, live read-only data,
configuration parameters, pseudo registers (drag-hands) and time-tagged
data.
2. All data records are low byte - high byte (Big Endian) format.
3. “File Name” column in section is the ASCII file ID for accessing data and
any required arguments.
4. The only allowed operations on the records are read, response or write
(where appropriate).
5. Individual records may be read or written.
6. Status of the last file write operation is found in the read-only file ERR. This
file is automatically over written with the status of the most recent write
ACK information.
File ID, Static Data
1. See the F4C product data specification for more detail on the meaning of the
data objects.
File ID, Dynamic Data
F4C Communications
Data Dictionary Overview ∞ 4
1. See the F4C product data specification for more detail on the meaning of the
data objects.
File ID, Configuration Data
1. See the F4C product data specification for more detail on the meaning of the
data objects.
2. ACK/NAK codes are described in TBD.
File ID, Pseudo Registers
1. See the F4C product data specification for more detail on the meaning of the
data objects.
2. Writes to these records ignore the data that is “written” to the record. The
present value of the associated live data is actually written.
File ID, Time-tagged
1. See the F4C product data specification for more detail on the meaning of the
data objects.
2. A variable number of records starting with the next available record are
returned when all time-tagged data is requested. Additionally, each record is
a variable size depending on the type of time-tagged record. The first
requested record must be “0”.
F4C Communications
Data Dictionary Overview ∞ 5
OBJECT
Obj
Var
Description
REQUEST
RESPONSE
(DNP message
components
parsed by the
CL4C/5 Series)
(DNP message
components
reported by the
CL4C/5 Series)
Func
Codes
(dec)
Qual
Codes
Func
Codes
(dec)
Qual
Codes
(hex)
(hex)
1
0
Binary Input - All Variations
1
00,01,0
6
1
1
Binary Input
1
00,01,0
6
129
00,01
1
2
Binary Input with Status
1
00,01,0
6
129
00,01
2
0
Binary Input Change - All Variations
1
06,07,0
8
2
1
Binary Input Change without Time
1
06,07,0
8
129,13
0
17, 28
2
2
Binary Input Change with Time
1
06,07,0
8
129
17, 28
2
3
Binary Input Change with Relative
Time
10
0
Binary Output - All Variations
1
00,01,0
6
10
1
Binary Output
1
00,01,0
6
129
00, 01
10
2
Binary Output Status
1
00,01,0
6
129
00, 01
12
0
Control Block - All Variations
12
1
Control Relay Output Block
3,4,5,6
17, 28
129
echo of
request
12
2
Pattern Control Block
12
3
Pattern Mask
20
0
Binary Counter - All Variations
1, 7, 8,
9,10
00,01,0
6
20
1
32-Bit Binary Counter
1, 7, 8,
9,10
00,01,0
6
129
00, 01
20
2
16-Bit Binary Counter
1, 7, 8,
9,10
00,01,0
6
129
00, 01
20
3
32-Bit Delta Counter
20
4
16-Bit Delta Counter
20
5
32-Bit Binary Counter without Flag
1, 7, 8,
00,01,0
129
00, 01
6
OBJECT
Obj
Var
Description
REQUEST
RESPONSE
(DNP message
components
parsed by the
CL4C/5 Series)
(DNP message
components
reported by the
CL4C/5 Series)
Func
Codes
(dec)
Qual
Codes
Func
Codes
(dec)
Qual
Codes
(hex)
(hex)
9,10
6
1, 7, 8,
9,10
00,01,0
6
20
6
16-Bit Binary Counter without Flag
129
00, 01
20
7
32-Bit Delta Counter without Flag
20
8
16-Bit Delta Counter without Flag
21
0
Frozen Counter - All Variations
1
00,01,0
6
21
1
32-Bit Frozen Counter
1
00,01,0
6
129
00,01
21
2
16-Bit Frozen Counter
1
00,01,0
6
129
00,01
21
3
32-Bit Frozen Delta Counter
21
4
16-Bit Frozen Delta Counter
21
5
32-Bit Frozen Counter with Time of
Freeze
21
6
16-Bit Frozen Counter with Time of
Freeze
21
7
32-Bit Frozen Delta Counter with
Time of Freeze
21
8
16-Bit Frozen Delta Counter with
Time of Freeze
21
9
32-Bit Frozen Counter without Flag
1
00,01,0
6
129
00, 01
21
10
16-Bit Frozen Counter without Flag
1
00,01,0
6
129
00, 01
21
11
32-Bit Frozen Delta Counter without
Flag
21
12
16-Bit Frozen Delta Counter without
Flag
22
0
Counter Change Event - All
Variations
1
06,07,0
8
22
1
32-Bit Counter Change Event
without Time
1
06,07,0
8
129,13
0
17, 28
22
2
16-Bit Counter Change Event
1
06,07,0
129
17, 28
7
OBJECT
Obj
Var
Description
REQUEST
RESPONSE
(DNP message
components
parsed by the
CL4C/5 Series)
(DNP message
components
reported by the
CL4C/5 Series)
Func
Codes
(dec)
Qual
Codes
Func
Codes
(dec)
Qual
Codes
(hex)
(hex)
without Time
8
22
3
32-Bit Delta Counter Change Event
without Time
22
4
16-Bit Delta Counter Change Event
without Time
22
5
32-Bit Counter Change Event with
Time
22
6
16-Bit Counter Change Event with
Time
22
7
32-Bit Delta Counter Change Event
with Time
22
8
16-Bit Delta Counter Change Event
with Time
23
0
Frozen Counter Event - All Variations
23
1
32-Bit Frozen Counter Event without
Time
23
2
16-Bit Frozen Counter Event without
Time
23
3
32-Bit Frozen Delta Counter Event
without Time
23
4
16-Bit Frozen Delta Counter Event
without Time
23
5
32-Bit Frozen Counter Event with
Time
23
6
16-Bit Frozen Counter Event with
Time
23
7
32-Bit Frozen Delta Counter Event
with Time
23
8
16-Bit Frozen Delta Counter Event
with Time
30
0
Analog Input - All Variations
30
1
32-Bit Analog Input
30
2
16-Bit Analog Input
8
1
00,01,0
6
1
00,01,0
6
129
00,01
OBJECT
Obj
Var
Description
REQUEST
RESPONSE
(DNP message
components
parsed by the
CL4C/5 Series)
(DNP message
components
reported by the
CL4C/5 Series)
Func
Codes
(dec)
Qual
Codes
Func
Codes
(dec)
Qual
Codes
(hex)
(hex)
30
3
32-Bit Analog Input without Flag
30
4
16-Bit Analog Input without Flag
30
5?
32-Bit Floating Point Analog Input
30
8?
32-Bit Floating Point Analog Input
without Flag
31
0
Frozen Analog Input - All Variations
31
1
32-Bit Frozen Analog Input
31
2
16-Bit Frozen Analog Input
31
3
32-Bit Frozen Analog Input with
Time of Freeze
31
4
16-Bit Frozen Analog Input with
Time of Freeze
31
5
32-Bit Frozen Analog Input without
Flag
31
6
16-Bit Frozen Analog Input without
Flag
32
0
Analog Change Event - All Variations
32
1
32-Bit Analog Change Event without
Time
32
2
16-Bit Analog Change Event without
Time
32
3
32-Bit Analog Change Event with
Time
32
4
16-Bit Analog Change Event with
Time
32
5?
32-Bit Floating Point Analog Input
32
8?
32-Bit Floating Point Analog Input
without Flag
33
0
Frozen Analog Event - All Variations
33
1
32-Bit Frozen Analog Event without
Time
9
1
00,01,0
6
1
06,07,0
8
1
06,07,0
8
129
00,01
129,13
0
17, 28
OBJECT
Obj
Var
Description
REQUEST
RESPONSE
(DNP message
components
parsed by the
CL4C/5 Series)
(DNP message
components
reported by the
CL4C/5 Series)
Func
Codes
(dec)
Qual
Codes
Func
Codes
(dec)
Qual
Codes
(hex)
(hex)
33
2
16-Bit Frozen Analog Event without
Time
33
3
32-Bit Frozen Analog Event with
Time
33
4
16-Bit Frozen Analog Event with
Time
34
1
16-bit Analog Change Deadband
1
2
06,
07,08
129
17, 28
129
17, 28
40
0
Analog Output Status - All Variations
1
00,01,0
6
40
1
32-Bit Analog Output Status
1
00,01,0
6
129
00, 01
40
2
16-Bit Analog Output Status
1
00,01,0
6
129
00, 01
41
0
Analog Output Block - All Variations
41
1
32-Bit Analog Output Block
3,4,5,6
17,28
129
Echo of
reques
t
41
2
16-Bit Analog Output Block
3,4,5,6
17,28
129
Echo of
reques
t
10
50
0
Time and Date - All Variations
50
1
Time and Date
1
2
50
2
Time and Date with Interval
51
0
Time and Date CTO - All Variations
51
1
Time and Date CTO
51
2
Unsynchronized Time and Date CTO
52
0
Time Delay - All Variations
07 where
quantity =
1
129
07 where
quantity =
1
129
07
where
quantity
=1
129
echo of
request
07
where
quantity
=1
52
1
Time Delay Coarse
129
07
where
quantity
=1
52
2
Time Delay Fine
129
07
where
quantity
=1
60
0
60
1
Class 0 Data
60
2
Class 1 Data
1
06
1
06,07,0
8
20, 21
06
60
3
Class 2 Data
1
20, 21
06,07,0
8
06
60
4
Class 3 Data
1
20, 21
06,07,0
8
06
70
1
File Identifier
1, 2
11
5B
129
5B
80
1
Internal Indications
2
00
index=
7
81
1
Storage Object
82
1
Device Profile
83
1
Private Registration Object
83
2
Private Registration Object
Descriptor
90
1
Application Identifier
100
1
Short Floating Point
100
2
Long Floating Point
100
3
Extended Floating Point
101
1
Small Packed Binary-Coded Decimal
101
2
Medium Packed Binary-Coded
Decimal
101
3
Large Packed Binary-Coded Decimal
No object (Cold Restart)
13
129
No object (Delay Measurement)
23
129
12
2 0 – 65534
20–4
2 0 – 65535
2 0 – 65535
20–2
2 0 – 10
2 1 – 500
2 1 – 500
Remote IED Address
Handshake Mode
Transmit enable delay
Transmit disable delay
Data link confirm mode
Number of data link retries for confirm
Data link confirm timeout
Application confirm timeout
100
100
3
0 (Never)
0
0
0 (Normal)
1
1234
50
9600
Default
DNP Related Configuration Parameters ∞ 13
2 0 – 65534
Report-by-Exception (Master) Address
F4C Communications
2 0 – 65535
Dead line sync
Range
2 300 – 19200
(in bytes)
Size
Baud rate
Item name
For DNP implementations, the communication programming values are:
DNP Related Configuration Parameters
CTS ignored/RTS Asserted
RTS/CTS
CTS ignored/ RTS is “transmit enable”
XON/XOFF software flow control
1.
2.
3.
4.
Application layer retry timeout period from. Units are 10’s of milliseconds
Data link retry timeout period. Units are 10’s of milliseconds
Number of data link layer retries
2. Always
1. Sometimes (When multi frame messages are sent)
0. Never
Code to determine when the IED will request data link ACKs from master:
Time to wait after data transmission to disable transmit enable signal. (in
milliseconds)
Time to wait after transmit enable signal to start of data transmission. (in
milliseconds)
NONE
0.
Code for method of controlling handshake lines:
Address of this IED, i.e. this port of this control in the DNP network
Destination address of unsolicited report by exception info
Time for synchronizing to start of message. (in milliseconds)
Serial port speed (BPS)
Description
2 0 – 36000
2 0 (False),
Unsolicited response notification delay
Unsolicited responses supported
2 0 - 65535
2 0 – 65535
2 0 (False),
Back-off Increment On Timeout
Absolute Max Back-off Time
Flush Events After Attempts Exhausted
F4C Communications
Channel Timeout
Back-off Terminates On Any Message
Back-off Terminates On 'Enable USR'
2 0 – 65535
Back-off terminates after time period
0
1 (True)
1 (True)
0 (False)
3600
0
60
3
0 (False)
1500
10
0
Default
DNP Related Configuration Parameters ∞ 14
2 0 – 65535
1 (True)
2 0 (False),
1 (True)
2 0 (False),
1 (True)
2 0 - 9999
Delivery attempts before back off
1 (True)
2 1 – 255
Unsolicited response minimum quantity per class
Range
2 0 – 10
(in bytes)
Size
Application Layer Retries
Item name
The time delay to wait for the channel to be ready, ie time from when device
asserts RTS to when CTS is asserted by the DCE. Units are 10’s of
milliseconds. 0 indicates infinite time delay.
Bool to enable receipt of any valid message from a master (with the same
address as the configured report by exception address in the device) to reset
the unsolicited response back-off timer.
Bool to enable receipt of “enable USR” message from a master (with the
same address as the configured report by exception address in the device) to
reset the unsolicited response back-off timer.
Note: If “Flush events after attempts Exhausted” is set to YES, the “Delivery
attempts before back off” setting effectively becomes the number of
attempt cycles (including application & data link layer retries) that the
device will make to transmit the USR before abandoning all attempts to
send the USR and flushing the event from the device’s event buffer.
Bool to delete current events from the unsolicited response buffer – ie no
further unsolicited responses will be generated until new events (that would
cause an unsolicited response to be generated) are created.
The capped maximum period of unsolicited response back-off period that can
be incremented – ie successive increments of the unsolicited response backoff period will be capped to this value. Units are seconds.
The amount of time the unsolicited response back-off period increments each
time following failed unsolicited response transmission cause the device to reenter back-off mode. Units are seconds.
The initial unsolicited response back off period for the device to wait before
recommencing transmission attempts of unsolicited responses. Units are
seconds.
Refer also to “Flush events after attempts Exhausted”.
The consecutive number of times the application layer will send unsolicited
responses without the correct acknowledgement from the master before
commencing an unsolicited response back-off time-out period. 0 indicates
unsolicited response back-off mode will never commence.
Bool to enable support of unsolicited response operation
(0 = use minimum number of events only)
Maximum time after an event occurs to generate an unsolicited response.
Units are 10’s of milliseconds.
Minimum number of events in any class that will immediately generate an
unsolicited response
The number of times the application layer will retry sending a message which
it previously sent and had no reply to. 0 indicates infinite retries
Description
2 0 –65535
2 0 (False),
Modem RX Idle Disconnect Time Out
Allow obsolete 0x1B qualifier for files
F4C Communications
2 0 –65535
Modem TX Idle Disconnect Time Out
0 (False)
3
3
60
ATZ
255
0
0
0
5000
Default
DNP Related Configuration Parameters ∞ 15
1 (True)
2 0 to 60000
Modem Connect Time Out
12
2 0 – 255
Hang up time
Modem Dial String
20–7
Collision Avoidance Channel Busy Indicator
25
2 0 – 6000
Maximum random delay
Modem Initialisation string
2 0 – 60000
Fixed Delay
Range
2 0 to 65535
(in bytes)
Size
Arm / Execute Delay
Item name
DCD Asserted (On)
DCD Unasserted (Off)
CTS Asserted (On)
CTS Unasserted (Off)
DSR Asserted (On)
DSR Unasserted (Off)
PSTN (software - Hayes character string indication)
1
2
3
4
5
6
7
Bool to enable support of 0x1B qualifier for file transfers. Provides backward
compatibility with master that is not compliant with DNP Users Group
technical bulletin TB9905-001.
The device will disconnect a dial up session if the device does not receive any
packets for a period longer than the Modem RX idel disconnect timeout.
The device will disconnect the dial up call if the device does not transmit any
packets for a period longer than the Modem Tx idle disconnect timeout.
Maximum time for modem to return CONNECT
Units are in sec.
Hayes command to dial out (dial up only)
Hayes commands to initialize modem (dial up only)
A device which has not transmitted or received any packets I the last period of
time (hang up time) will terminate the connection.
Never Busy
0
Code to determine which RS232 control line to use to indicate channel is
busy.
Maximum collision avoidance hold-off time
Fixed collision avoidance delay
Units are in milliseconds.
Maximum time between receiving Arm command and receiving corresponding
Execute command for the command to be carried out.
Description
DNP Error Indications
The Internal Indications (IIN) bits from Section 3.6 of the DNP 3.0 Application Layer
document are defined as follows:
1st Octet
Bit 0
All stations message received.
As defined Section 3.6.
Bit 1
Class 1 data available.
As defined Section 3.6.
Bit 2
Class 2 data available.
As Defined in Section 3.6.
Bit 3
Class 3 data available.
Not used. Device has no Class 3 data.
Bit 4
Time sync required from master.
As defined Section 3.6.
Bit 5
Outstation is in local.
As defined Section 3.6 for CROB points.
Configuration Parameters are not writeable when the outstation is in
local.
Bit 6
Device Trouble.
As defined by Custom Logic for this control.
Bit 7
Device restart.
As defined Section 3.6.
F4C Communications
DNP Error Indications ∞ 16
2nd Octet
Bit 0
Function code not implemented.
As defined Section 3.6.
Bit 1
Requested objects unknown.
As defined Section 3.6.
Bit 2
Parameters in the qualifier, range or data fields are invalid or out of
range.
As defined Section 3.6.
Writes to Configuration Parameters will set this bit to indicate that data
could not be written. The file ERR must be read to determine the cause of
failure.
Bit 3
Event buffer overflow.
Not used.
Bit 4
Request understood but already executing..
As defined Section 3.6.
Bit 5
Current configuration is corrupted.
Not used.
Bit 6
Reserved.
Bit 7
Reserved.
F4C Communications
DNP Error Indications ∞ 17
References
DNP 3.00 Basic 4, Rev. 01
DNP V30.00 Subset Definitions, Version 1.00
DNP Control Relay Output Block Minimum Implementation, 3/8/96
F4C Recloser Control Product Data - DATA 2163
F4C Communications
References ∞ 18
Appendix A: F4C DNP 3.0 Device Profile
Template
F4C Communications
Appendix A: F4C DNP 3.0 Device Profile Template Page 19 ∞
DNP V3.00
DEVICE PROFILE DOCUMENT
This document must be accompanied by a table having the following headings:
Object Group
Request Function Codes Response Function Codes
Object Variation
Request Qualifiers
Response Qualifiers
Object Name (optional)
Vendor Name: Cooper Power Systems
Device Name:
6A00042501 Protocol Converter for F4C Recloser Control
Highest DNP Level Supported:
For Requests
2
Device Function:
Master
Slave
For Responses 2
Notable objects, functions, and/or qualifiers supported in addition to the
Highest DNP Levels Supported (the complete list is described in the attached
table):
Device uses File Identifier (Obj. 70 Var. 01) to access Read-only static & live
data, configuration data, pseudo registers and time-tagged data.
Explanations for items that are configurable may be found in the DNP Related
Configuration Parameters in this document.
Analog deadband parameters are stored in non-volatile memory and will be
retained on reset
Binary Frozen Counters are not returned in Class 0 response.
Maximum Data Link Frame Size
(octets):
Maximum Application Fragment Size
(octets):
Transmitted
292
Transmitted 2048
Received
292
Received
Maximum Data Link Re-tries:
None
Fixed at
Configurable, range None to 10
30-Jan-01
R280-90-16 Page 20
2048
Maximum Application Layer Re-tries:
None
Configurable, range None to 10
(Fixed is not permitted)
Appendix A Page 1 of 4
Rev 2.0
Requires Data Link Layer Confirmation:
Never
Always
Sometimes
If 'Sometimes', when?
______________________________________________
Configurable If 'Configurable', how?___Via Item in configuration parameters
____
Requires Application Layer Confirmation:
Never
Always (not recommended)
When reporting Event Data (Slave devices only)
When sending multi-fragment responses (Slave devices only)
Sometimes
If 'Sometimes', when?
______________________________________________
Configurable If 'Configurable',
how?______________________________________________
Timeouts while waiting for:
Data Link Confirm
None None
Complete Appl. Fragment
Configurable
None
Application Confirm
Configurable
None
Complete Appl. Response
Configurable
Fixed at _________ Variable Configurable
Fixed at _________ Variable Fixed at _________ Variable
Fixed at _________ Variable
Others
________________________________________________________________________
__
Attach explanation if 'Variable' or 'Configurable' was checked for any timeout
Sends/Executes Control Operations:
WRITE Binary Outputs
Never
SELECT/OPERATE
Never Never DIRECT OPERATE
DIRECT OPERATE – NO ACK Never Count > 1
Pulse On
Pulse Off
Latch On
Always Sometimes
Always Sometimes Always Sometimes Always Sometimes Configurable
Configurable
Configurable
Configurable
Never Always Sometimes Configurable
Never Always Sometimes Configurable
Never Always Sometimes Configurable
Never Always Sometimes Configurable
R280-90-16 Page 21
Appendix A Page 2 of 4
Latch Off
Never Always Sometimes
Configurable
Queue
Clear Queue
Never Always Sometimes Configurable
Never Always Sometimes Configurable
Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.
R280-90-16 Page 22
Appendix A Page 3 of 4
FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
Either time-tagged or non-time-tagged for a single event
Both time-tagged and non-time-tagged for a single event
Configurable (attach explanation)
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY:
Reports Binary Input Change Events
when no specific variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable to send both, one
or the other (attach explanation)
Sends Unsolicited Responses:
Never
Configurable (attach
explanation)
Only certain objects
Sometimes (attach
explanation)
Reports time-tagged Binary Input Change
Events when no specific variation
requested:
Time
Never
Binary Input Change With Time
Binary Input Change With Relative
Configurable (attach explanation)
Sends Static Data in Unsolicited Responses:
Never
When Device Restarts
When Status Flags Change
No other options are permitted.
ENABLE/DISABLE
UNSOLICITED
Function codes supported
Default Counter Object/Variation:
No Counters Reported
Configurable (attach
explanation)
Default Object
20
Default Variation 06
Point-by-point list attached
Counters Roll Over at:
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value __________
Point-by-point list attached
Sends Multi-Fragment Responses: Yes No
R280-90-16 Page 23
Appendix A Page 4 of 4
Appendix B: F4C DNP 3.0 Data Dictionary
F4C Communications
Appendix B: F4C DNP 3.0 Data Dictionary Page 24 ∞
30-Jan-01
29-Jan-01
16-May-00
29-Jan-00
30-Oct-99
1-Sep-99
v 2.0
v 0.7
v 0.6
v 0.5c
v 0.5b
v 0.5
30-Jan-01
R280-90-16 Page 25
Updated Firmware to Version 2.12 DNP3.0 L2 Compliant
Removed Object 2 descriptions from Object 1 Indices 96-105
Changed: Obj 12 Index 26 to Latched; Obj 22 Variation to 2
Updated PCCFG file to V2.12 firmware release
Added CROB for transparent mode & updated PCCFG file
Corrected Counters and added Status of CROB to Class 0
Appendix B Page 1 of 9
THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF COOPER INDUSTRIES, INC.
UNAUTHORIZED REPRODUCTION OR MODIFICATION IS PROHIBITED.
F4C DNP 3.0 Protocol Device Profile Data Dictionary
F4C DNP 3.0 Device Profile data dictionary
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
R280-90-16 Page 26
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Index
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Description
INPUT SUBSYSTEM
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
Default Static Variation
Obj Var Desc
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Appendix B Page 2 of 9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Default Event Variation
Obj Var Class Desc
Seq No 30, Bit xx
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Seq No 31, Bit xx
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Seq No 32, Bit xx
00
01
02
03
04
05
Combined Recloser Status
Recloser tripped
Recloser Lockout
Malfunction
Battery Not OK
Recloser closed
Current above minimum trip
Accessory operation
AC power OK
Supervisory allowed
Power status OK
Alternate minimum trip active
Ground trip block actve
Non-reclose active
Event data available
SGF active/available
Not used
Combined Internal Control Status - Part 1
Power down active
Sequence co-ordinaton allowed
Target reset on successful reclose
Trip counter on/off
Event recorder on/off
Interrupter monitor on/off
Phase complex TCC 1 on/off
Ground complex TCC 1 on/off
Phase complex TCC 2 on/off
Ground complex TCC 2 on/off
Phase high current trip on/off
Ground high current trip on/off
Phase high current lockout on/off
Ground high current lockout on/off
Ground trip precedence on/off
Momentary relay operation on/off
Target Recorder Status
Ground
Phase A
Phase B
Phase C
SGF
Not used
Class 0 - 3, Binarys
Cooper 2180
Cross Reference
Comments
F4C DNP 3.0 Device Profile data dictionary
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
R280-90-16 Page 27
Index
38
39
40
41
42
43
44
45
46
47
Description
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
Default Static Variation
Obj Var Desc
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
01 01 No Status
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Appendix B Page 3 of 9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Default Event Variation
Obj Var Class Desc
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
02 01
1 Without Time
Seq No 33, Bit xx
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Seq No 34, Bit xx
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Accessory Operation Code
High Current lockout
Remote trip and lockout
Supervisory trip and lockout
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Malfunction Status Code
Failed to close on remote
Failed to close on local
Low battery voltage
Power down in less than programmed time
Defective data in EEROM
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Class 0 - 3, Binarys
Cooper 2180
Cross Reference
06
07
08
09
10
11
12
13
14
15
Comments
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
F4C DNP 3.0 Device Profile data dictionary
96
97
98
99
100
101
102
103
104
105
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
R280-90-16 Page 28
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
Index
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Binary Input
Description
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
No Status
Default Static Variation
Obj Var Desc
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
02
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Without Time
Appendix B Page 4 of 9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Default Event Variation
Obj Var Class Desc
Class 0 - 3, Binarys
Seq No 35, Bit xx
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Combined Internal Control Status - Part 2
SGF enable
Not used
Not used
Not used
Not used
Not used
Not used
Not used
SGF tripping on/off
Hot line tag active
Tripping on TCC 2 only on/off
UDP switch mode on/off
LTC disable output active
Not used
Not used
Not used
Protocol Converter Status
DIP/Rotary switch override on
Terminal configuration on
Protocol converter running
ROM error
RAM error
Not Used
Control unit responding
Not Used
Not Used
Invalid protocol convertor real time clock
Cooper 2180
Cross Reference
Comments
F4C DNP 3.0 Device Profile data dictionary
06
07
08
09
10
11
Binary Counter
Binary Counter
Binary Counter
Binary Counter
Binary Counter
Binary Counter
R280-90-16 Page 29
00
01
02
03
04
05
Index
Binary Counter
Binary Counter
Binary Counter
Binary Counter
Binary Counter
Binary Counter
Description
INPUT SUBSYSTEM
20
20
20
20
20
20
06
06
06
06
06
06
Default Static Variation
Obj Var Desc
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
22
22
22
22
22
22
02
02
02
02
02
02
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Appendix B Page 5 of 9
1
1
1
1
1
1
Default Event Variation
Obj Var Class Desc
Protocol Converter Counters
Comms Tx
Comms Rx
Comms Rx Errors
Control Tx
Control Rx
Control Rx Errors
Switch operation counters
Number of ground OCP targets
Number of phase 1-2 OCP targets
Number of phase 3-4 OCP targets
Number of phase 5-6 OCP targets
Switch operation counter
Number of SGF OCP targets
Comments
F4C DNP 3.0 Device Profile data dictionary
40
41
42
43
44
45
Class 0 - 3, Counters
Cooper 2180 Cross
Reference
Seq No xx
02
03
04
05
06
07
08
09
10
Analog Input
Analog Input
Analog Input
Analog Input
Analog Input
Analog Input
Analog Input
Analog Input
Analog Input
R280-90-16 Page 30
00
01
Index
Analog Input
Analog Input
Description
INPUT SUBSYSTEM
30
30
30
30
30
30
30
30
30
30
30
02
02
02
02
02
02
02
02
02
02
02
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
Default Static Variation
Obj Var Desc
34
34
34
34
34
34
34
34
34
34
34
01
01
01
01
01
01
01
01
01
01
01
Obj Var
Desc
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
16 bit
32
32
32
32
32
32
32
32
32
32
32
02
02
02
02
02
02
02
02
02
02
02
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Without Flag
Demand ground current
Demand current through bushing 1-2
Demand current through bushing 3-4
Demand current through bushing 5-6
Instantaneous current values
Instantaneous ground current
Instantaneous current through bushing 1-2
Instantaneous current through bushing 3-4
Instantaneous current through bushing 5-6
Without Flag Sequence position
Calibration references
Without Flag Calibration reference 90% (fixed at 29491)
Without Flag Calibration reference 0 (fixed at 0)
Comments
Appendix B Page 6 of 9
2
2
2
2
2
2
2
2
2
2
2
Default Deadband VariationDefault Event Variation
Obj Var Class Desc
F4C DNP 3.0 Device Profile data dictionary
87
88
89
8A
83
84
85
86
82
80
81
Cooper 2180
Cross
Reference
Seq No xx
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Units
Class 0 - 3, Analogs
1
1
1
1
1
1
1
1
1
1
1
Multiplication
Scale Factor
R280-90-16 Page 31
00 10
Binary Output
12
12
12
31
32
33
Binary Output
Binary Output
Binary Output
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
2 Status
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Obj Var Desc
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Index
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Binary Output
Description
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
CROB
Default Static Variation
Off
Off
Off
Off
Off
Off
On
On
Off
Off
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Protocol Converter control
* Perform Operation -trip & lockout
Protocol Converter control
Restart protocol converter
Load protocol converter defaults
Force transparent mode
Perform Operation -trip & lockout
Perform Operation -trip
Perform Operation - close
Alternate minimum trip on/off
Ground trip block on/off
Non-reclose on/off
Power-down on/off
Sequence co-ordination on/off
Target reset on successful reclose on/off
Operation counter on/off
Event recorder on/off
Interrrupter duty on/off
Complex TCC #1 , Phase on/off
Complex TCC #1 , Ground on/off
Complex TCC #2 , Phase on/off
Complex TCC #2 , Ground on/off
High current trip, Phase on/off
High current trip, Ground on/off
High current lockout, Phase on/off
High current lockout, Ground on/off
Reset target indicators
Reset malfunction status indicators
Reset accessory status indicators
Ground trip precedence on/off
Supervisory via momemtary contacts on/off
SGF enable
Perform combined trip & lockout/close
SGF on/off
Hot line tag on/off
Tripping on TCC #2 only on/off
UDP switch mode on/off
Default
Condition Comments
Appendix B Page 7 of 9
Pulsed
Pulsed
Pulsed
Pulsed
Pulsed
Pulsed
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Pulsed
Pulsed
Pulsed
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Operation Type
OUTPUT SUBSYSTEM - Control Output Relay Block Operations and Status
F4C DNP 3.0 Device Profile data dictionary
CROB & Class 0
Simple Status
*
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
SBO Seq No xx
Cooper 2180
Cross Reference
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
R280-90-16 Page 32
Binary Output
Binary Output
Binary Output
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
Binary
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
31 10
32 10
33 10
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
2 Status
2 Status
2 Status
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Appendix B Page 8 of 9
* Non-latching; always reads FALSE
Protocol Converter control
* Restart protocol converter
* Load protocol converter defaults
* Force transparent mode
* Perform Operation -trip
* Perform Operation - close
Alternate minimum trip on/off
Ground trip block on/off
Non-reclose on/off
Power-down on/off
Sequence co-ordination on/off
Target reset on successful reclose on/off
Operation counter on/off
Event recorder on/off
Interrrupter duty on/off
Complex TCC #1 , Phase on/off
Complex TCC #1 , Ground on/off
Complex TCC #2 , Phase on/off
Complex TCC #2 , Ground on/off
High current trip, Phase on/off
High current trip, Ground on/off
High current lockout, Phase on/off
High current lockout, Ground on/off
* Reset target indicators
* Reset malfunction status indicators
* Reset accessory status indicators
Ground trip precedence on/off
Supervisory via momemtary contacts on/off
SGF enable
Perform combined trip & lockout/close
SGF on/off
Hot line tag on/off
Tripping on TCC #2 only on/off
UDP switch mode on/off
F4C DNP 3.0 Device Profile data dictionary
CROB & Class 0
*
*
*
*
*
30-10
30-11
30-12
31-00
31-01
31-02
31-03
31-04
31-05
31-06
31-07
31-08
31-09
31-10
31-11
31-12
31-13
*
*
*
31-14
31-15
35-00
30-04
35-08
35-09
35-10
35-11
70
File Identifier
R280-90-16 Page 33
70
Index
File Identifier
Description
Static
Obj Var
CONSTANT DATA (Read-only)
1
1
Desc
PCCONST
CONST
File Name
(All data size is 16 bits)
0
0
1
2
3
Record
Number
Appendix B Page 9 of 9
Protocol converter software version
Control version & device code
Serial number of control ( Modifiable from front panel)
Display firmware version
CPU firmware version
Comments
F4C DNP 3.0 Device Profile data dictionary
100
100
1
100
1
Scale
Factor
Files, Readonly Static
Cooper 2180
Cross Reference
Ordinal Block 5,
Offset xxxx
0000
0002
0004
0006
Index
R280-90-16 Page 34
File Identifier
Description
70
1
Static
Obj Var Desc
MISC. LIVE DATA (Read-only)
ERR
File Name
DNP last file ID write error file
Comments
Appendix B Page 1 of 7
0-7 ACK code
8-15 Optional error info
Record
Number
F4C DNP 3.0 Device Profile data dictionary
1
1
Data Size (in
bytes)
0000
0008
Start Offset in
Record (Hex)
Files, Readonly Dynamic
Cooper 2180
Cross Reference
Ordinal Block 0,
Offset xxxx
0000 - 0007
0008 - 000F
R280-90-16 Page 35
File Identifier
70
1
CFG
CONFIGURATION DATA (Read/Write)
(All data size is 16 bits)
Static
Description
Index
Obj Var Desc
File Name
35
36
37
Appendix B Page 2 of 7
Complex TCC #1 constant time adder Ground
Complex TCC #1 multiplier - Phase
Complex TCC #1 multiplier - Ground
Complex TCC #1 minimum response time Phase
34
31
32
33
30
TCC module
Line frequency (50 Hz or 60 Hz)
CT selection
PGS close delay time
Close re-try time
Close On time
Security code for Level 1
Security code for Level 2
Security code for Level 3
Minimum time on battery w/o malfunction
Interrupter duty 100% value
Number of close re-try attempts
Minimum trip - Phase
Minimum trip - Ground
1st TCC - Phase
1st TCC - Ground
2nd TCC - Phase
2nd TCC - Ground
Operations on 1st TCC - Phase
Operations on 1st TCC - Ground
Operations to lockout - Phase
Operations to lockout - Ground
Sequence reset time
Reclose interval 1
Reclose interval 2
Reclose interval 3
Alternate minimum trip - Phase
Alternate minimum trip - Ground
Remote/supervisory close reset time
Set integration interval - Phase (15 min or 5
min)
Set integration interval - Ground (5 min or 1
min)
Complex TCC #1 selection - Phase
Complex TCC #1 selection - Ground
Complex TCC #1 constant time adder - Phase
Comments
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Record
Number
F4C DNP 3.0 Device Profile data dictionary
0046
0048
004A
0044
003E
0040
0042
003C
Cooper 2180
Cross Reference
Ordinal Block 6,
Offset xxxx
0000
0002
0004
0006
0008
000A
000C
000E
0010
0012
0014
0016
0018
001A
001C
001E
0020
0022
0024
0026
0028
002A
002C
002E
0030
0032
0034
0036
0038
003A
Cycles
Seconds
Seconds
Minutes
Files, Configuration
1
100
100
100
100
1
1
1
Minutes
1
Amps
Amps
Minutes
I ^^1.5
Seconds
Seconds
Cycles
Seconds
Seconds
Seconds
Seconds
Amps
Amps
Seconds
Hz
Units
1
1
1
100
1
1
1
1
1
1
10^^5
1
1
1
1
1
1
1
1
1
1
1
1
10
10
10
1
1
1
Scale
Factor
Index
R280-90-16 Page 36
File Identifier
Description
70
1
Static
Obj Var Desc
CFG
File Name
SGF trip time
69
Appendix B Page 3 of 7
SGF Alternate minimum trip
68
66
67
65
64
63
62
Comm channel 2 (realtime port) baud rate
code (not modifiable remotely in DNP)
Comm channel 2 handshake mode code (not
modifiable remotely in DNP)
Comm channel 2 number of dead-line sync
characters (not used in DNP)
Comm channel 2 transmit enable delay (not
modifiable remotely in DNP)
Control remote address (not modifiable
remotely in DNP)
Real time clock year (not used in DNP)
SGF Minimum trip %
Complex TCC #2 constant time adder Ground
Complex TCC #2 multiplier - Phase
Complex TCC #2 multiplier - Ground
Complex TCC #2 minimum response time Phase
Complex TCC #2 minimum response time Ground
HCT multiples of minimum trip - Phase (HCT
= High Current Trip)
HCT multiples of minimum trip - Ground
HCT trip delay time - Phase
HCT trip delay time - Ground
HCT active shot number - Phase
HCT active shot number - Ground
HCLO multiples of minimum trip - Phase
(HCLO = High Current Lockout)
HCLO multiples of minimum trip - Ground
HCLO active shot number - Phase
HCLO active shot number - Ground
Phase 1-2 Interrupter duty
Phase 3-4 Interrupter duty
Phase 5-6 Interrupter duty
Comm channel 1 (front panel) baud rate code
Complex TCC #1 minimum response time Ground
Complex TCC #2 selection - Phase
Complex TCC #2 selection - Ground
Complex TCC #2 constant time adder - Phase
Comments
61
54
55
56
57
58
59
60
48
49
50
51
52
53
47
46
43
44
45
42
39
40
41
38
Record
Number
F4C DNP 3.0 Device Profile data dictionary
008A
0088
0084
0086
0082
0080
007E
007C
007A
006C
006E
0070
0072
0074
0076
0078
0060
0062
0064
0066
0068
006A
005E
005C
0056
0058
005A
0054
004E
0050
0052
Cooper 2180
Cross Reference
Ordinal Block 6,
Offset xxxx
004C
%of Ground
MT
%of Ground
MT
Seconds
mSec
Files, Configuration
1
1
1
1
1
1
1
1
BPS
BPS
1
1
%
%
%
Cycles
Cycles
Cycles
Cycles
Seconds
Seconds
Cycles
Units
1
1
1
1
10
10
10
1
1
1
1
1
1
1
1
100
100
100
100
1
1
1
Scale
Factor
R280-90-16 Page 37
70
File Identifier
1
1
Static
Obj Var Desc
70
Index
File Identifier
Description
PCCFG
CFG
File Name
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
78
70
71
72
73
74
75
76
77
Record
Number
Appendix B Page 4 of 7
Protocol converter configuration
Control unit type
Control Address
Control Baud Rate
Ordinal Block 0 size
Ordinal Block 5 size
Ordinal Block 6 size
Ordinal Block B size
Communication mode status
Communication baud rate
Master Station Address
Remote IED (my) Address
Unsolicited Minimum Quantity per Class
Unsolicited notification delay
Unsolicited supported
Dead Line Sync
Handshake mode
Transmit Enable Delay
Transmit Disable Delay
Channel Timeout
Data Link Confirm
Data Link Retries
Data Link Timeout
Application Retries
Application Timeout
Arm time
Protocol converter address to controller
Standard request timeout
Retries for all requests (excpet time tagged)
Retries for time tagged requests
Ordinal Block write set-up time
SGF operations to lockout
Phase 1-2 target identifier
Phase 3-4 target identifier
Phase 5-6 target identifier
UDP switch timing mode TCC (1 or 2)
UDP minimum target sensing - Phase
UDP minimum target sensing - Ground
UDP alternate minimum target sensing Phase
UDP alternate minimum target sensing Ground
Comments
F4C DNP 3.0 Device Profile data dictionary
009C
Cooper 2180
Cross Reference
Ordinal Block 6,
Offset xxxx
008C
008E
0090
0092
0094
0096
0098
009A
mSec
mSec
mSec
mSec
mSec
mSec
mSec
mSec
mSec
1
1
1
1
10
10
1
1
1
Files, Configuration
mSec
1
Amps
Amps
1
1
Amps
Amps
Units
1
1
1
1
1
1
1
Scale
Factor
Index
R280-90-16 Page 38
File Identifier
Description
70
1
Static
Obj Var Desc
CFG
File Name
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Record
Number
Appendix B Page 5 of 7
NOP back off time
Ordinal Block Read Request timeout
Interpoll Delay
Protocol mode on start up
Transparent mode timeout
Delivery Attempts before back off
Flush Events After Attempts Exhausted
Backoff Terminates After Time Period
Backoff Terminates On 'Enable USR'
Backoff Terminates On Any Message
Backoff Increment On Timeout
Absolute Max Backoff Time
Modem TX Idle Disconnect Time Out
Modem RX Idle Disconnect Time Out
Allow obsolete 0x1B qualifier for files
Comments
F4C DNP 3.0 Device Profile data dictionary
Cooper 2180
Cross Reference
Ordinal Block 6,
Offset xxxx
Sec
Sec
Sec
Sec
Sec
Sec
1
1
1
1
1
1
Files, Configuration
mSec
mSec
mSec
Units
1
1
1
Scale
Factor
Index
R280-90-16 Page 39
File Identifier
Description
70
1
PSEUDO
File Name
Record
Number
0
1
2
3
Appendix B Page 6 of 7
Max demand ground current
Max demand current through bushing 1-2
Max demand current through bushing 3-4
Max demand current through bushing 5-6
Comments
Cooper 2180
Cross Reference
Ordinal Block B,
Offset xxxx
0000
0002
0004
0006
Amps
Amps
Amps
Amps
Units
Files, Pseudo Registers
1
1
1
1
Scale
Factor
These are MIN/MAX registers. Write to these points ignore data "written", present value of register is written instead.
(All data size is 16 bits)
Static
Obj Var Desc
PSEUDO REGISTERS (Read/Write)
F4C DNP 3.0 Device Profile data dictionary
70
File Identifier
R280-90-16 Page 40
70
Index
File Identifier
Description
1
1
TT001
TT000
(All data size is 16 bits)
Static
Obj Var Desc
File Name
TIME-TAGGED DATA (Read-only)
Record
Number
2
2
4
2
2
2
2
nn Event type ID code
Date that event occurred
Time that event occurred
Ground current
Phase 1-2 current
Phase 3-4 current
Phase 5-6 current
2
2
4
2
2
2
2
nn Event type ID code
Date that event occurred
Time that event occurred
Ground current
Phase 1-2 current
Phase 3-4 current
Phase 5-6 current
Appendix B Page 7 of 7
2
2
4
2
2
2
2
0 Event type ID code
Date that event occurred
Time that event occurred
Ground current
Phase 1-2 current
Phase 3-4 current
Phase 5-6 current
Profile recorder information
2
2
4
2
2
2
2
Data Size
(in bytes)
0 Event type ID code
Date that event occurred
Time that event occurred
Ground current
Phase 1-2 current
Phase 3-4 current
Phase 5-6 current
Event recorder information
Comments
F4C DNP 3.0 Device Profile data dictionary
0000
0002
0004
0008
000A
000C
000E
0000
0002
0004
0008
000A
000C
000E
0000
0002
0004
0008
000A
000C
000E
0000
0002
0004
0008
000A
000C
000E
Start Offset in
Record (Hex)
Files, Time Tagged
nn
Time-Tagged Type
1, Record xx
00
nn
Time-Tagged Type
0, Record xx
00
Cooper 2180 Cross
Reference
Kyle® Form 4C Recloser Control DNP3 Device Profile
©2003
Cooper Power Systems, Inc.
Kyle® is a registered trademark of Cooper Industries, Inc.
P.O. Box 1640
Waukesha, WI 53187
www.cooperpower.com
KYLE
12/03