™
Five modular components – operators, contact blocks, covers, legend plates, and bodies – are combined to provide a variety of control stations which are:
• For use indoors or outdoors, in areas which are hazardous due to the presence of flammable gases and vapors, or combustible dust.
• Used in conjunction with magnetic starters or contactors for remote control of motors and other electrical apparatus.
• For installation in petroleum refineries, chemical, petrochemical, and other industrial process facilities; grain processing and storage facilities; and other heavy industrial applications where
Class I, Class II, or Class III hazards are present.
• Momentary contact pushbuttons, maintained contact pushbuttons, and pilots lights offer a choice of functions.
• Selector switches in 2 or 3 position configurations including keyed and spring return options.
• Single-hole, two-hole, and three-hole covers for one, two, or three devices respectively per station.
• Rugged control devices for safe, reliable operation in industrial applications.
• Bodies, with extra room for wire pulling and termination, also include two integral mounting feet for fast, secure installation.
• Bodies have 1 /
2
", 3 /
4
", or 1" dead-end or through-feed conduit hubs with integral bushing for protection of wire insulation.
• Covers and bodies are available in
Feraloy ® or copper-free aluminum for light weight and corrosion resistance.
• DL legend plates have large lettering to give clear indication of device function.
Space is available for field markings.
• NEC
Class I, Division 1 & 2, Groups B*
(Div. 2), C, D
Class II, Division 1 & 2, Groups E, F, G
Class III
• Zone 1 & 2 Group IIB*
• NEMA: 3R, 7B (Div. 2) CD, 9EFG, 12
• UL Standard: 1203
Cl. I, Div. 1 & 2, Groups B (Div. 2 only) C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
Zone 1 & 2 Group IIB
NEMA 3R, 7B* (Div. 2) CD, 9 EFG, 12
• Bodies, covers –
Feraloy aluminum.
® or copper-free
• Pushbuttons and guards – Type 6 / 6 nylon.
• Operating shafts, bearings – stainless steel.
•
Feraloy ® iron alloy – electrogalvanized and aluminum acrylic paint.
• Copper-free aluminum – natural.
• Stainless steel – natural.
In Inches:
Description
Copper-free aluminum bodies and covers
Corro-free™ epoxy finish for use in severely corrosive environments.
FlexStation covers and bodies.
Suffix
SA
S752
• Pushbuttons and selector switches –
600 VAC heavy duty (NEMA A600).
• Pilot lights – 120 VAC.
514
†Covers have same length and width as back boxes.
*For Class I, Division 1, Group B or Zone 1 Hydrogen applications, use the EFS(C) complete control station catalog numbers see page 528.
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright © 2013 Eaton’s Crouse-Hinds Business
™
Cl. I, Div. 1 & 2, Groups B (Div. 2 only) C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
Zone 1 & 2 Group IIB
NEMA 3R, 7B* (Div. 2) CD, 9 EFG, 12
Pushbutton – front operated, standard black button
Description
Single button for 1 contact block
Single button for 2 contact blocks
Double buttons for 2 contact blocks
Cat. #
DEV11
DEV12
DEV22
Options Suffix
Specify color for each pushbutton button (ex: DEV11G, DEV22GR). Color is black if unspecified.
Green button - unmarked
Red button - unmarked
Momentary red mushroom head style (not available with lockout or with DEV22)
Lockout with bar and chain (available on DEV11 and DEV12)
Maintained red mushroom head style (lockout comes standard, do not specify S153; not available on DEV22) (Push to stop only)
G
R
S111
S153
S769
Pilot Light – factory sealed, incandescent lamp
Description
Pilot light with red jewel
Pilot light with green jewel
Pilot light with amber jewel
Pilot light with clear jewel
Pilot light with blue LED and clear jewel
Options
LED lamps (standard clear jewel with colored lamp)
24 V lamp (not available with transformer feature)
240 / 120 V pilot light transformer
480 / 120 V pilot light transformer
600 / 120 V pilot light transformer
Cat. #
DEV30 J1
DEV30 J3
DEV30 J6
DEV30 J10
DEV30 J11 LED
Suffix
LED
S300
T2
T4
T5
Selector Switch – with standard lockout
Description
2-position (pos. 1 – N.O., pos. 2 – N.C.) for use with 1 or 2 contact blocks
3-position (pos. 1 – N.O., pos. 2 – Open, pos. 3 – N.C.) for use with 1 or 2 contact blocks
3-position (pos. 1 – N.C., pos. 2 – N.O., pos. 3 – N.O. for Switch A)
(pos. 1 – N.O., pos. 2 – N.O., pos. 3 – N.C. for Switch B) for use with 2 contact blocks
Spring return to center from right (For DEV43 or DEV44 only)
Spring return to center from left (For DEV43 or DEV44 only)
Spring return to center from right and left (For DEV43 or DEV44 only)
Key Operated – removable from all positions
Key Operated – removable from left position for DEV42 or from center for DEV43 and DEV44
Key Operated – removable from right position for DEV42 or from left for DEV43 and DEV44
Key Operated – removable from right position for DEV43 and DEV44
*Additional key lock housings available; please contact Customer Service.
Cat. #
DEV42
DEV43
DEV44
Suffix
S634
S635
S842
S847 K1*
S847 K2*
S847 K3*
S847 K4*
Contact Block
Description
Contact block, 1 NO and 1 NC, 10A, 600VAC, A600 rating
For additional technical information see page 571.
Cat. #
ESWP126
Note - Each control station will accept a maximum of three contact blocks. Select device operators accordingly. DEV12, DEV22 and DEV44 may not be used on a three-operator (DS443-SA) cover. DEV42 and DEV43 may not be used on a three-operator cover when using them with two contact blocks.
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright © 2014 Eaton’s Crouse-Hinds Business
™
Cl. I, Div. 1 & 2, Groups B (Div. 2 only) C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
Zone 1 & 2 Group IIB
NEMA 3R, 7B* (Div. 2) CD, 9 EFG, 12
For use with single hole covers
Cat. # Inscription
For use with 2 or 3 hole covers
Cat. # Inscription Cat. #
DL165
DL186
DL187
DL188
DL189
DL190
DL191
DL192
DL193
DL194
DL195
DL196
DL197
DL198
DL199
DL101
DL128
DL129
DL130
DL132
DL133
DL135
DL136
DL137
DL138
DL139
DL140
DL141
DL142
DL143
DL144
DL148
DL149
Blank
Run-Jog
Hand-Auto
Forward-Reverse
Open-Close
Up-Down
In-Out
Raise-Lower
Start-Stop
Run-Off-Jog
Hand-Off-Auto
For-Off-Rev
Fast-Off-Slow
1-Off-2
Open-Off-Close
Up-Off-Down
Off-On
Auto-Off-Hand
Slow-Fast
Safe-Run
Raise-Off-Lower
Slow-Off-Fast
Odd-Off-Even
Stop-Start
On-Off
Fast-Slow
Local-Remote
Trip-Reset
Auto-Manual
Start-Emer Stop
Alarm-Silence
Maint-Manual
Test-Reset
DL10
DL11
DL12
DL13
DL14
DL15
DL16
DL17
DL18
DL19
DL01
DL02
DL03
DL05
DL06
DL07
DL08
DL09
DL20
DL21
DL22
DL23
DL24
DL25
DL26
DL27
DL28
DL29
DL30
Note: For special markings order DL101-"desired markings" or DL01-"desired markings"
Blank w/no fields
Blank w/single field
Blank w/2 fields
Start
Stop
On
Off
Run
Jog
Trip
Reset
Test
Power On
Hand
Automatic
Emer Stop
Forward
Reverse
Open
Close
Up
Down
In
Out
Raise
Lower
Run-Jog
Hand-Auto
Forward-Reverse
DL86
DL87
DL88
DL89
DL90
DL91
DL92
DL93
DL94
DL95
DL96
DL97
DL98
DL99
DL41
DL42
DL43
DL44
DL46
DL47
DL48
DL49
DL65
DL85
DL32
DL33
DL35
DL36
DL37
DL38
DL39
DL40
Covers
Description
Blank cover with single hole (Single gang)
Blank cover with 2 holes (Single gang)
Blank cover with 3 holes (To be used with EFD(C)1491-SA, 2491-SA or 3491-SA series of back boxes)
Replacement cover plug for unused device operator openings
Inscription
Open-Close
Up-Down
In-Out
Raise-Lower
Start-Stop
Run-Off-Jog
Hand-Off-Auto
For-Off-Rev
Fast-Off-Slow
1-Off-2
Open-Off-Close
Up-Off-Down
Fast
Slow
Off-On
Auto-Off-Hand
Slow-Fast
Safe
Safe-Run
Raise-Off-Lower
Slow-Off-Fast
Odd-Off-Even
Stop-Start
On-Off
Fast-Slow
Local-Remote
Trip-Reset
Auto-Manual
Start-Emer Stop
Alarm-Silence
Maint-Manual
Test-Reset
Cat. #
DS441
DS442
DS443 SA
206765
Options:
Aluminum body (mandatory suffix on DS443 must be included in catalog number)
Exterior epoxy powder coat finish
Interior & exterior epoxy powder coat finish. Not available on three operator cover (DS443-SA)
Suffix
SA
S752
S753
516 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright © 2013 Eaton’s Crouse-Hinds Business
™
Cl. I, Div. 1 & 2, Groups B (Div. 2 only) C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
Zone 1 & 2 Group IIB
NEMA 3R, 7B* (Div. 2) CD, 9 EFG, 12
Back Boxes - for use with DS441 and DS442 covers or with 1 gang and 2 gang DS/DSD Series covers
Dead End
EDS171
EDS271
EDS371
EDS172
EDS272
EDS372
Through Feed
EDSC171
EDSC271
EDSC371
EDSC172
EDSC272
EDSC372
Hub Size
1 /
2
”
3 /
4
”
1”
1 /
2
”
3 /
4
”
1”
Back Box Arrangement
Single gang back box
Single gang back box
Single gang back box
Double gang back box
Double gang back box
Double gang back box
Options:
Aluminum body
Exterior epoxy powder coat finish
Interior & exterior epoxy powder coat finish
Suffix
SA
S752
S753
Back Boxes – for use with DS443-SA cover or with 1 1
/
2
gang DS511 (3-operator) Series covers
Dead End
EFD1491 SA
EFD2491 SA
EFD3491 SA
Options
Through Feed
EFDC1491 SA
EFDC2491 SA
EFDC3491 SA
Exterior epoxy powder coat finish
Interior & exterior epoxy powder coat finish
Hub Size
1 /
2
”
3 /
4
”
1”
Back Box Arrangement
1 1 /
2
gang back box
1 1 /
2
gang back box
1 1 /
2
gang back box
Suffix
S752
S753 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright © 2014 Eaton’s Crouse-Hinds Business
™
Cl. I, Div. 1 & 2, Groups B (Div. 2 only) C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
Zone 1 & 2 Group IIB
NEMA 3R, 7B* (Div. 2) CD, 9 EFG, 12
Back Boxes – for use with DS441 and DS442 covers
Through Feed
EDSC378
Hub Size
1"
Common Cover Assemblies
Cat. #
DS455
➀
DS476
➀ ➁
DS456 ➀ ➀
DS429§
DS454§
DS510 ➀ §
Description
With one pilot light
With one pilot light and transformer
With two pilot lights
With one pushbutton
With two pushbuttons
With one pushbutton and one pilot light
Back Box Arrangement
3 gang tandem
➀
Add color symbol for each pilot light from table below.
Color Symbol Color
Red
Green
J1
J3
Amber
Clear
➁
Add suffix below for transformer primary voltage:
Transformers – Voltages above 125
Nom. Volts 50–60Hz Transformer
220 / 110
440 / 110
550 / 110
Symbol
J6
J10
Primary Voltage Range
220–240
440–480
550–600
Color
Blue
Suffix
T2
T4
T5
Symbol
J11
§ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below:
START
STOP
ON
EMERGENCY
FORWARD
OFF
RUN
JOG
OPEN
CLOSE
RESET
TRIP
TEST
DOWN
IN
REVERSE
UP OUT
LIGHT ON
HAND
AUTOMATIC
RAISE
LOWER
518 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright © 2013 Eaton’s Crouse-Hinds Business