HCPT1309 Series
Power Inductors
Description
RoHS
2002/95/EC
• 105°C maximum total temperature operation
• 13.2mm x 13.2mm x 9.0mm through hole
package
• Core material: Powder Iron
• Inductance range from 0.20µH to 3.3µH
• Current range from 90.0 Amps to 11.4 Amps
• Frequency range up to 1MHz
Applications
• Next generation processors
• High current DC-DC converters
• VRM, multi-phase buck regulator
• Desktop computers
• Video game power
Environmental Data
• Storage temperature range: -40°C to +105°C
• Operating temperature range: -40°C to +105°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds
maximum
Part Number
HCPT1309-R20-R
HCPT1309-R47-R
HCPT1309-1R0-R
HCPT1309-1R5-R
HCPT1309-2R2-R
HCPT1309-3R3-R
OCL (1)
nominal +/20% (µH)
0.20
0.49
0.96
1.59
2.27
3.31
Irms (2)
Amperes
Packaging
• Supplied in bulk packaging, 100 parts per tray
Isat Amperes (3)
Peak 20%
rolloff @20°C
72.2
43.3
30.9
24.1
19.7
16.7
43.1
34.0
19.4
13.7
12.5
11.4
(1) OCL: Open Circuit Inductance test parameters: 100kHz, 0.1Vrms, 0.0Adc.
(2) Irms: DC current for an approximate ∆T of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 105°C under worst
case operating conditions verified in the end application.
Isat Amperes (4)
Peak 30%
rolloff @20°C
90.0
55.0
40.0
30.6
25.0
21.0
DCR (mΩ)
nom @20°C
K-factor
(5)
0.426
0.624
1.90
3.82
4.10
4.80
154.1
92.4
66.0
51.4
42.0
35.6
(3) Isat Amperes peak for approximately 20% rolloff (@20°C)
(4) Isat Amperes peak for approximately 30% rolloff (@20°C)
(5) K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p: (Gauss), K: (K factor from table), L: (Inductance in uH),
∆I (Peak to peak ripple current in Amps).
Mechanical Diagrams
TOP VIEW
FRONT VIEW
BOT TOM WE
IV
9.0
max
HCPT1309-xxx
wwllyy R
13.2 sq
MAX
1
2
3.5 +/- 0.5
"B" +/- 1.0
"A " MAX
"C" typ
SCHEMATIC
Dimension Table
Part No
"A "
"B"
HCPT1309-R20
HCPT1309-R47
HCPT1309-1R0
HCPT1309-1R5
HCPT1309-2R2
HCPT1309-3R3
14.0
14.0
13.7
13.5
13.5
13.5
12.2
12.2
12.0
11.8
11.8
11.8
RECOMMENDED PCB PAD LAYOUT
"C"
"D"
1.63
1.63
1.29
1.15
1.15
1.15
2.13
2.13
1.6
1.40
1.40
1.40
"B" +/- 1.0
ØD
1
2
Dimensions are in millimeters.
wwllyy = Date Code. R = Revision Level.
HCPT1309 Series
Power Inductors
Core Loss
Core Loss vs. B p-p
160.00
140.00
Core Loss (mW)
120.00
200kHz
300kHz
400kHz
500kHz
600kHz
700kHz
800kH
900kHz
1.0MHz
100.00
80.00
60.00
40.00
20.00
0.00
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
B p-p (Gauss)
Inductance Characteristics
OCL vs Isat
100
90
80
OCL (%)
70
60
50
40
30
20
10
0
0
20
40
60
80
100
120
140
160
% of Isat
PM-4138 3/07
© Cooper Electronic
Technologies 2007
Visit us on the Web at www.cooperbussmann.com
1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487
Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic
Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.