Vattenfall Substation Automation Project Scope Protocols 6 SMP Gateways 6 Visual T&D for local / remote control ABB SPA-Bus IEC 60870-5-101 IEC 60870-5-103 IEC 60870-5-104 Client Vattenfall http://www.vattenfall.com In service: 2003 www.cooperpowereas.com The Solution The Context Vattenfall AB is wholly owned by the Swedish state and is the fifth largest energy company in Europe. Vattenfall generates electricity and heat and delivers energy to about 6 million customers in Northern Europe. The Vattenfall group generates around 160 TWh and sells 180 TWh of electricity per year. The annual production and sales of heat is 34 TWh. Net sales for 2002 are 11 billion EUR. In May 2003, Vattenfall required a Substation Automation System capable of performing data concentration of multiple substation IEDs, and of acting as a gateway to its SCADA master system. The objective was to access, concentrate and manage the data originating from the remote IEDs and perform Passthrough transparent connections with the relays in order to access the event files and waveforms. To ensure timely delivery, the company was looking for an off-the-shelf hardware and software platform with a proven track record. Cooper Power Systems provided Vattenfall with Cybectec SMPTM Substation Modernization PlatformTM Gateway and Visual T&DTM HMI to meet the requirements of the project. The SMP Gateway provides the interface between the various IEDs and the master systems. The SMP Gateway Passthrough function was used to access the event and waveform data from the relays, using the same ABB SPA-Bus link as the acquisition data. With the SMP Gateways Passthrough function, the data analysis system can thus retrieve event files and waveforms, even while the SCADA is performing data acquisition. To simplify the access to the event and waveform data, Cooper Power Systems’ software development and consulting group implemented a custom TCP/IP socket-based interface to the SMP Gateways Passthrough function. This interface allows Vattenfall's engineering group to use the standard ABB waveform analysis software to retrieve the data from the SMP Gateway, through the corporate WAN. The Visual T&D HMI is used as a local and remote HMI for the maintenance and operation of the substation. Quebec City 730 Commerciale Street, Suite 200 Saint-Jean-Chrysostome, Quebec Canada G6Z 2C5 Technical Support: P: +1.418.834.0009 support@cybectec.com Montreal 1290 St. Denis Street, Suite 300 Montreal, Quebec Canada H2X 3J7 Sales: P: +1.514.845.6195 sales@cybectec.com All Cooper logos and Cooper Power Systems are trademarks of Cooper US, Inc., in the U.S. and other countries. You are not permitted to use Cooper trademarks without the prior written consent of Cooper US, Inc. ©2009 Cooper US, Inc. All Rights Reserved B1100-09038 • April 2009 • New Issue