Barrier Bridge
CTBB-11
Solution For Dividing Cables
At Intersections
The Barrier Bridge Solution
Cooper B-Line is proud to introduce the Barrier Bridge, a solution for keeping cable runs
divided at horizontal tees and crosses. Cables are separated for code compliance, protection,
and organization. Keeping cables separate at fittings has always been a challenge, but the
process is now simplified with the Barrier Bridge.
Benefits of the product include:
• Code Compliance:
Eliminate questions on the jobsite with an obvious and visible solid metal barrier
between cable types.
• Cable Protection:
Minimize the potential for signal interference at the weakest link – the intersection.
• Design Simplicity:
Make your design intention clear with available CAD details, template specifications,
and submittal data sheets.
• Labor Savings:
Speed up your installation by having a plan for intersections and having the right
pieces and parts for each fitting.
In addition, the Barrier Bridge solution offers the
following features:
• Slots for easy attachment of cable ties
• Raised sides of top level to retain cables
• Smooth, hemmed edges to protect cable
• Pre-engineered products for two (2) or
three (3) cable runs
• Installation steps that use standard tools
For additional information,
visit www.cooperbline.com
or call 800-851-7415
2
Table of Contents
Barrier Bridge Components
...................................................................................
Barrier Bridge Component Numbering System
Horizontal Tee, Two Cable Runs
.........................................................................
Horizontal Tee, Three Cable Runs
Horizontal Cross, Two Cable Runs
.......................................................................
...................................................................
Horizontal Cross, Three Cable Runs
Hardware Kit
..........................................................
................................................................
5
6, 7
8, 9
10, 11
12, 13
.....................................................................................................
3
4
14
Barrier Bridge Components
The Barrier Bridge System is made up of four key components: the Elevation Brace, the Cable Bridge,
the Straight Section Barrier, and Hardware Kit(s).
Cable Bridge
Straight Section Barrier*
Elevation Brace
Hardware Kit
To build a Barrier Bridge, you need to know about your cable tray and your cable runs. Most of the
information is already known when you order your tray system.
Here is what you need to know:
Cable Tray
•
•
•
•
•
Cable Runs
Height or Loading Depth
Material
Width
Fitting Type (HT / HX)
Fitting Radius
• Number of Runs
• Approximate Width and Relative
Location of Each Run
Use the tables on pages 6 through 13 to select your parts. Also select a hardware kit from page 14.
* Straight Section Barrier information can be found in the Cable Tray Systems catalog.
4
Barrier Bridge Component Numbering System
Elevation Brace
The Elevation Brace divides the lower level of cables, much like a standard divider/barrier strip.
It also supports the Cable Bridge.
7 3 A - EB 24
Cable Tray
Barrier
Loading Depth
3 = 3” (76mm) (4” Siderail)
4 = 4” (101mm) (5” Siderail)
5 = 5” (127mm) (6” Siderail)
6 = 6” (152mm) (7” or 8” Siderail)
Material
A = Aluminum
P = Pre-Galvanized
G = Hot Dip
Galvanized
SS6 = Stainless Steel
Type 316
Elevation
Brace
Length
24 = 24” (609mm)
60 = 60” (1524mm)
Cable Bridge
The Cable Bridge supports and retains the upper level of cables.
7 3 A - 12 - CB 20
Cable Tray
Loading Depth
Barrier 3 = 3” (76mm) (4” Siderail)
4 = 4” (101mm) (5” Siderail)
5 = 5” (127mm) (6” Siderail)
6 = 6” (152mm) (7” or 8” Siderail)
Material
A = Aluminum
P = Pre-Galvanized
G = Hot Dip
Galvanized
SS6 = Stainless Steel
Type 316
Bridge Width
03 = 3” (76mm)
06 = 6” (152mm)
09 = 9” (228mm)
12 = 12” (305mm)
18 = 18” (457mm)
24 = 24” (609mm)
30 = 30” (762mm)
36 = 36” (914mm)
42 = 42” (1067mm)
Cable
Bridge
Length
05 = 4.5” (114mm)
08 = 7.5” (190mm)
11 = 10.5” (267mm)
14 = 13.5” (343mm)
17 = 16.5” (419mm)
20 = 19.5” (495mm)
23 = 22.5” (571mm)
26 = 25.5” (648mm)
29 = 28.5” (724mm)
32 = 31.5” (800mm)
35 = 34.5” (976mm)
38 = 37.5” (952mm)
44 = 43.5” (1105mm)
50 = 49.5” (1257mm)
53 = 52.5” (1333mm)
Cooper B-Line Sales Engineers are available to assist you in selecting parts for a Barrier Bridge System.
Phone (800) 851-7415 ext. 366
5
Horizontal Tee, Two Cable Runs
Cable Bridge
for ‘B’ Run
Straight Section Barrier
Elevation Brace
Tee Fitting
Use the table on page 7 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled with the radius of your fitting.
The box contains both the quantity and the catalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
6
Horizontal Tee, Two Cable Runs
Tray
Width
6”
(152mm)
9”
(228mm)
12”
(305mm)
18”
(457mm)
24”
(609mm)
30”
(762mm)
36”
(914mm)
Description
2 runs
03" and 03"
2 runs
06" and 03"
2 runs
03" and 06"
2 runs
03" and 09"
2 runs
09" and 03"
2 runs
06" and 06"
2 runs
12" and 06"
2 runs
06" and 12"
2 runs
09" and 09"
2 runs
18" and 06"
2 runs
06" and 18"
2 runs
12" and 12"
2 runs
24" and 06"
2 runs
06" and 24"
2 runs
18" and 12"
2 runs
12" and 18"
2 runs
30" and 06"
2 runs
06" and 30"
2 runs
24" and 12"
2 runs
12" and 24"
2 runs
18" and 18"
‘A’ Larger
Cable Run
‘B’ Smaller
Cable Run
03
03
06
03
03
06
03
09
09
03
06
06
12
06
06
12
09
09
18
06
06
18
12
12
24
06
06
24
18
12
12
18
30
06
06
30
24
12
12
24
18
18
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(1) : 7 # *-03-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB17
(2) : 7 # *-EB24
(1) : 7 # *-18-CB14
(3) : 7 # *-EB24
(1) : 7 # *-03-CB17
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB17
(2) : 7 # *-EB24
(1) : 7 # *-12-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB14
(2) : 7 # *-EB24
(1) : 7 # *-09-CB17
(3) : 7 # *-EB24
(1) : 7 # *-18-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB20
(2) : 7 # *-EB24
(1) : 7 # *-24-CB14
(3) : 7 # *-EB24
(1) : 7 # *-18-CB17
(3) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB08
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB20
(2) : 7 # *-EB24
(1) : 7 # *-18-CB08
(3) : 7 # *-EB24
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB26
(2) : 7 # *-EB24
(1) : 7 # *-24-CB08
(3) : 7 # *-EB24
(1) : 7 # *-12-CB20
(2) : 7 # *-EB24
(1) : 7 # *-18-CB14
(3) : 7 # *-EB24
(1) : 7 # *-06-CB32
(2) : 7 # *-EB24
(1) : 7 # *-30-CB08
(3) : 7 # *-EB24
(1) : 7 # *-12-CB26
(2) : 7 # *-EB24
(1) : 7 # *-24-CB14
(3) : 7 # *-EB24
(1) : 7 # *-18-CB20
(3) : 7 # *-EB24
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
7
Horizontal Tee, Three Cable Runs
Cable Bridge
for ‘B’ Run
Cable Bridge
for ‘C’ Run
Straight Section Barrier
Elevation Brace
Tee Fitting
Use the tables below and on page 9 to select parts needed to build your
Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled
with the radius of your fitting.
The box contains both the quantity and the catalog number of the parts
needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
Tray
Width
9”
(228mm)
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
3 runs
03" / 03" / 03”
03
03
03
3 runs
06" / 03" / 03”
06
03
03
3 runs
03" / 03" / 06”
03
03
06
12”
(305mm)
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB14 (1) : 7 # *-06-CB14 (1) : 7 # *-09-CB14 (1) : 7 # *-12-CB17
(1) : 7 # *-03-CB11 (1) : 7 # *-06-CB11 (1) : 7 # *-09-CB11 (1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(3) : 7 # *-EB24
(4) : 7 # *-EB24
(4) : 7 # *-EB24
(1) : 7 # *-03-CB17
(1) : 7 # *-03-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(1) : 7 # *-03-CB11
(3) : 7 # *-EB24
8
(1) : 7 # *-06-CB17
(1) : 7 # *-06-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-06-CB11
(4) : 7 # *-EB24
(1) : 7 # *-09-CB17
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-12-CB20
(1) : 7 # *-12-CB17
(4) : 7 # *-EB24
(1) : 7 # *-18-CB17
(1) : 7 # *-12-CB14
(4) : 7 # *-EB60
Horizontal Tee, Three Cable Runs
Tray
Width
18”
(457mm)
24”
(609mm)
30”
(762mm)
36”
(914mm)
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
3 runs
12" / 03" / 03”
3 runs
03" / 03" / 12”
3 runs
09" / 06" / 03”
3 runs
03" / 06" / 09”
3 runs
06" / 06" / 06”
3 runs
18" / 03" / 03”
3 runs
03" / 03" / 18”
3 runs
12" / 09" / 03”
3 runs
03" / 09" / 12”
3 runs
12" / 06" / 06”
3 runs
06" / 06" / 12”
3 runs
09" / 09" / 06”
3 runs
06" / 09" / 09”
3 runs
18" / 06" / 06”
3 runs
06" / 06" / 18”
3 runs
12" / 12" / 06”
3 runs
06" / 12" / 12”
3 runs
12" / 09" / 09”
3 runs
09" / 09" / 12”
3 runs
24" / 06" / 06”
3 runs
06" / 06" / 24”
3 runs
18" / 12" / 06”
3 runs
06" / 12" / 18”
3 runs
18" / 09" / 09”
3 runs
09" / 09" / 18”
3 runs
12" / 12" / 12”
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
12
03
03
(1) : 7 # *-03-CB17 (1) : 7 # *-03-CB14 (2) : 7 # *-EB24
03
03
12
(1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB24
09
06
03
(1) : 7 # *-03-CB17 (1) : 7 # *-06-CB11 (3) : 7 # *-EB24
03
06
09
(1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (4) : 7 # *-EB24
06
06
06
(1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (3) : 7 # *-EB24
18
03
03
(1) : 7 # *-03-CB23 (1) : 7 # *-03-CB20 (2) : 7 # *-EB24
03
03
18
(1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB24
12
09
03
(1) : 7 # *-03-CB23 (1) : 7 # *-09-CB14 (3) : 7 # *-EB24
03
09
12
(1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (4) : 7 # *-EB24
12
06
06
(1) : 7 # *-06-CB20 (1) : 7 # *-06-CB14 (3) : 7 # *-EB24
06
06
12
(1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
09
09
06
(1) : 7 # *-06-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
06
09
09
(1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (4) : 7 # *-EB24
18
06
06
(1) : 7 # *-06-CB26 (1) : 7 # *-06-CB20 (3) : 7 # *-EB24
06
06
18
(1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
12
12
06
(1) : 7 # *-06-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB24
06
12
12
(1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB24
12
09
09
(1) : 7 # *-09-CB23 (1) : 7 # *-09-CB14 (4) : 7 # *-EB24
09
09
12
(1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
24
06
06
(1) : 7 # *-06-CB32 (1) : 7 # *-06-CB26 (3) : 7 # *-EB24
06
06
24
(1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
18
12
06
(1) : 7 # *-06-CB32 (1) : 7 # *-12-CB20 (4) : 7 # *-EB24
06
12
18
(1) : 7 # *-18-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB24
18
09
09
(1) : 7 # *-09-CB29 (1) : 7 # *-09-CB20 (4) : 7 # *-EB24
09
09
18
(1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
12
12
12
(1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB24
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
9
Horizontal Cross, Two Cable Runs
Cable Bridge
for ‘B’ Run
Cable Bridge
for ‘B’ Run
Straight Section Barrier
Straight Section
Barrier
Elevation Brace
Cross Fitting
Use the table on page 11 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled with
the radius of your fitting. The box contains both the quantity and the
catalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
10
Horizontal Cross, Two Cable Runs
Tray
Width
6”
(152mm)
9”
(228mm)
12”
(305mm)
Description
2 runs
03" and 03"
2 runs
06" and 03"
2 runs
03" and 06"
2 runs
09" and 03"
2 runs
03" and 09"
2 runs
06" and 06"
18”
(457mm)
2 runs
12" and 06"
2 runs
06" and 12"
2 runs
09" and 09"
24”
(609mm)
2 runs
18" and 06"
2 runs
06" and 18"
2 runs
12" and 12"
30”
(762mm)
36”
(914mm)
2 runs
24" and 06"
2 runs
06" and 24"
2 runs
18" and 12"
2 runs
12" and 18"
2 runs
30" and 06"
2 runs
06" and 30"
2 runs
24" and 12"
2 runs
12" and 24"
2 runs
18" and 18"
‘A’ Larger
Cable Run
‘B’ Smaller
Cable Run
03
03
06
03
03
06
09
03
03
09
06
06
12
06
06
12
09
09
18
06
06
18
12
12
24
06
06
24
18
12
12
18
30
06
06
30
24
12
12
24
18
18
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB11
(3) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-06-CB11
(1) : 7 # *-03-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-06-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB11
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-18-CB14
(1) : 7 # *-12-CB17
(4) : 7 # *-EB60
(1) : 7 # *-09-CB11
(1) : 7 # *-03-CB17
(3) : 7 # *-EB24
(1) : 7 # *-12-CB11
(1) : 7 # *-06-CB17
(4) : 7 # *-EB24
(1) : 7 # *-18-CB11
(1) : 7 # *-09-CB17
(4) : 7 # *-EB60
(1) : 7 # *-24-CB14
(1) : 7 # *-12-CB20
(4) : 7 # *-EB60
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-18-CB17
(1) : 7 # *-18-CB17
(4) : 7 # *-EB60
(1) : 7 # *-12-CB08
(1) : 7 # *-06-CB14
(4) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-18-CB08
(1) : 7 # *-06-CB20
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-24-CB08
(1) : 7 # *-06-CB26
(4) : 7 # *-EB60
(1) : 7 # *-18-CB14
(1) : 7 # *-12-CB20
(4) : 7 # *-EB60
(1) : 7 # *-30-CB08
(1) : 7 # *-06-CB32
(4) : 7 # *-EB60
(1) : 7 # *-24-CB14
(1) : 7 # *-12-CB26
(4) : 7 # *-EB60
(1) : 7 # *-18-CB20
(1) : 7 # *-18-CB20
(4) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
11
Horizontal Cross, Three Cable Runs
Cable Bridge 1
for ‘B’ Run
Cable Bridge
for ‘A’ Run
Cable Bridge
for ‘C’ Runs
Cable Bridge 2
for ‘B’ Run
Elevation Brace
Straight Section
Barrier
Straight Section
Barrier
Cross Fitting
Use the tables below and on page 13 to select parts needed to build your
Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
Cooper B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled
with the radius of your fitting.
The box contains both the quantity and the catalog number of the
parts needed for the Barrier Bridge
4. Then select a hardware kit from page 14.
Tray
Width
9”
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
(228mm)
3 runs
03" / 03" / 03”
03
03
03
12”
3 runs
06" / 03" / 03”
06
03
03
3 runs
03" / 03" / 06”
03
03
06
(305mm)
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB14
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB14
(3) : 7 # *-EB24
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB14
(5) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB14
(5) : 7 # *-EB60
(1) : 7 # *-12-CB17
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB17
(5) : 7 # *-EB60
(1) : 7 # *-06-CB14
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB14
(1) : 7 # *-03-CB17
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB17
(5) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB17
(5) : 7 # *-EB60
(1) : 7 # *-18-CB17
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB17
(1) : 7 # *-12-CB20
(5) : 7 # *-EB60
12
Horizontal Cross, Three Cable Runs
Tray
Width
18”
(457mm)
24”
(609mm)
30”
(762mm)
36”
(914mm)
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
3 runs
12" / 03" / 03”
3 runs
03" / 03" / 12”
3 runs
09" / 06" / 03”
3 runs
03" / 06" / 09”
3 runs
06" / 06" / 12”
3 runs
18" / 03" / 03”
3 runs
03" / 03" / 18”
3 runs
12" / 09" / 03”
3 runs
03" / 09" / 12”
3 runs
12" / 06" / 06”
3 runs
06" / 06" / 12”
3 runs
09" / 09" / 06”
3 runs
06" / 09" / 09”
3 runs
18" / 06" / 06”
3 runs
06" / 06" / 18”
3 runs
12" / 12" / 06”
3 runs
06" / 12" / 12”
3 runs
12" / 09" / 09”
3 runs
09" / 09" / 12”
3 runs
24" / 06" / 06”
3 runs
06" / 06" / 24”
3 runs
18" / 12" / 06”
3 runs
06" / 12" / 18”
3 runs
18" / 09" / 09”
3 runs
09" / 09" / 18”
3 runs
12" / 12" / 12”
12
03
03
03
03
12
09
06
03
03
06
09
06
06
06
18
03
03
03
03
18
12
09
03
03
09
12
12
06
06
06
06
12
09
09
06
06
09
09
18
06
06
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB14
(1) : 7 # *-03-CB17 (5) : 7 # *-EB24
(1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (1) : 7 # *-06-CB11
(1) : 7 # *-03-CB17 (5) : 7 # *-EB24
(1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB08
(1) : 7 # *-06-CB14 (5) : 7 # *-EB24
(1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB20
(1) : 7 # *-03-CB23 (5) : 7 # *-EB24
(1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (1) : 7 # *-09-CB14
(1) : 7 # *-03-CB23 (5) : 7 # *-EB24
(1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB14
(1) : 7 # *-06-CB20 (5) : 7 # *-EB24
(1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (1) : 7 # *-09-CB11
(1) : 7 # *-06-CB20 (5) : 7 # *-EB24
(1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB20
(1) : 7 # *-06-CB26 (5) : 7 # *-EB60
06
06
18
12
12
06
06
12
12
12
09
09
09
09
12
24
06
06
06
06
24
18
12
06
06
12
18
18
09
09
09
09
18
(1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB20
(1) : 7 # *-09-CB29 (5) : 7 # *-EB60
12
12
12
(1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (1) : 7 # *-12-CB14
(1) : 7 # *-12-CB26 (5) : 7 # *-EB60
(1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (1) : 7 # *-12-CB14
(1) : 7 # *-06-CB26 (5) : 7 # *-EB60
(1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB14
(1) : 7 # *-09-CB23 (5) : 7 # *-EB60
(1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB26
(1) : 7 # *-06-CB32 (5) : 7 # *-EB60
(1) : 7 # *-18-CB20 (1) : 7 # *-12-CB11 (1) : 7 # *-12-CB20
(1) : 7 # *-06-CB32 (5) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
13
Hardware Kits
Fitting
HX - 2 runs
HX - 3 runs
HT - 2 runs
HT - 3 runs
Redi-Rail/Series 2-5 Aluminum
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
Series 1 Pre-Galv
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
Alternating Strut Rung
7ZN-HK2
7ZN-HK3
7ZN-HK4
7ZN-HK5
Up Strut Rung
7ZN-HK2
7ZN-HK3
7ZN-HK4
7ZN-HK5
Down Strut Rung
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
7SS-HK1
7SS-HK1
7SS-HK1
7SS-HK1
Alternating Strut Rung
7SS-HK2
7SS-HK3
7SS-HK4
7SS-HK5
Up Strut Rung
7SS-HK2
7SS-HK3
7SS-HK4
7SS-HK5
Down Strut Rung
7SS-HK1
7SS-HK1
7SS-HK1
7SS-HK1
Series 2-5
Pre-Galv
Series 1 HDG
Series 2-5
HDG &
Stainless Steel
Catalog Number
Hardware
7ZN-HK1
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
7ZN-HK2
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(7) 9ZN-1204NB Hold-Down Clamps
7ZN-HK3
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(10) 9ZN-1204NB Hold-Down Clamps
7ZN-HK4
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(5) 9ZN-1204NB Hold-Down Clamps
7ZN-HK5
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(8) 9ZN-1204NB Hold-Down Clamps
7SS-HK1
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
7SS-HK2
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(7) 9SS6-1204NB Hold-Down Clamps
7SS-HK3
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(10) 9SS6-1204NB Hold-Down Clamps
7SS-HK4
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(5) 9SS6-1204NB Hold-Down Clamps
7SS-HK5
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(8) 9SS6-1204NB Hold-Down Clamps
Visit the Barrier Bridge webpage for additional tools and resources:
• Installation instructions
• CAD details
• Submittal sheets
www.cooperbline.com/barrier-bridge
14
Why Cooper B-Line?
Why Cooper B-Line?
Unmatched range of solutions
We have a full line of products to support, enclose, connect and protect
data center infrastructure
Superior service
We offer an industry leading commitment to service and a shipping
guarantee that is unique to the market
Specification and design resources
We offer customers a strong set of design and specification tools
and resources
Innovation
We deliver product solutions that are innovative and offer labor savings
American made
We manufacture domestically, allowing over 90% of our products to be
Buy American Act compliant
15
Global Locations:
Cooper B-Line’s U.S. Customer Service
Center is staffed Monday through Friday from
7 a.m. to 5:00 p.m. Central Standard Time.
If a situation requires that you have to contact
us after hours, please leave a message via
phone or E-mail so we can give it immediate
attention the following business day.
Service Facility - Canada:
Cooper B-Line - Canada
Div. of Cooper Ind. Canada, Inc.
5925 McLaughlin Road
Mississauga, ON L5R 1B8
Canada
Phone: (800) 569-3660
Fax: (888) 753-3355
Email: blinecanada@cooperindustries.com
Service Facility - United States:
Cooper B-Line - USA
509 West Monroe Street
Highland, IL 62249
United States
Phone: (800) 851-7415
Fax: (800) 356-1438
Email: blineus@cooperindustries.com
Service Facility - Europe:
Cooper B-Line, Ltd. - UK
Walrow, Highbridge
Somerset, TA9 4AQ
United Kingdom
Phone: + 44 (0) 1278 783371
Fax: + 44 (0) 1278 789037
Email: sales@cooperbline.co.uk
Cooper B-Line - Saudi Arabia:
PO Box 70160 - Al Khobar - 31952
Kingdom of Saudi Arabia
Phone: 00966 3 812 2236
Fax: 00966 3 812 1291
Email: blineme@cooperindustries.com
Literature Fulfillment Questions:
Phone: (314) 426-1800
Fax: (314) 426-6022
Email: cooperbline@repcographics.com
Request Literature Website:
http://order.repcographics.com/cooperb/
Cooper B-Line
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
Cooper Industries, Plc.
600 Travis, Ste. 5600
Houston, TX 77002-1001
Phone: 713-209-8400
www.cooperindustries.com
© 2011 Cooper B-Line, Inc.
CTBB-11
Printed in U.S.A.
15811