Barrier Bridge
Straight Section Barrier
Cable Bridge
Elevation Brace
Hardware Kit
Barrier Bridge
The Barrier Bridge System is made up of four key components: the Elevation Brace, the Cable
Bridge, the Straight Section Barrier, and Hardware Kit(s).
To build a Barrier Bridge, you need to know about your cable tray and your cable runs. Most of
the information is already known when you order your tray system.
Here is what you need to know:
Cable Tray
•
•
•
•
•
Cable Runs
Height or Loading Depth
Material
Width
Fitting Type (HT / HX)
Fitting Radius
• Number of Runs
• Approximate Width and Relative
Location of Each Run
Use the tables on pages BBA-3 through BBA-10 to select your parts. Also select a hardware kit from
page BBA-11.
BBA-1
Cable Tray Systems
Barrier Bridge
Component Numbering System
Elevation Brace
The Elevation Brace divides the lower level of cables, much like a standard divider/barrier strip.
It also supports the Cable Bridge.
7 3 A - EB 24
Cable Tray
Barrier
Loading Depth
3 = 3” (76mm) (4” Siderail)
4 = 4” (101mm) (5” Siderail)
5 = 5” (127mm) (6” Siderail)
6 = 6” (152mm) (7” or 8” Siderail)
Material
A = Aluminum
P = Pre-Galvanized
G = Hot Dip
Galvanized
SS6 = Stainless Steel
Type 316
Elevation
Brace
Length
24 = 24” (609mm)
60 = 60” (1524mm)
Cable Bridge
The Cable Bridge supports and retains the upper level of cables.
7 3 A - 12 - CB 20
Cable Tray
Barrier
Material
A = Aluminum
P = Pre-Galvanized
G = Hot Dip
Galvanized
SS6 = Stainless Steel
Type 316
Bridge Width
03 = 3” (76mm)
06 = 6” (152mm)
09 = 9” (228mm)
12 = 12” (305mm)
18 = 18” (457mm)
24 = 24” (609mm)
30 = 30” (762mm)
36 = 36” (914mm)
42 = 42” (1067mm)
Cable
Bridge
Length
05 = 4.5” (114mm)
08 = 7.5” (190mm)
11 = 10.5” (267mm)
14 = 13.5” (343mm)
17 = 16.5” (419mm)
20 = 19.5” (495mm)
23 = 22.5” (571mm)
26 = 25.5” (648mm)
29 = 28.5” (724mm)
32 = 31.5” (800mm)
35 = 34.5” (976mm)
38 = 37.5” (952mm)
44 = 43.5” (1105mm)
50 = 49.5” (1257mm)
53 = 52.5” (1333mm)
B-Line Sales Engineers are available to assist you in selecting parts for a Barrier Bridge System.
Phone (800) 851-7415 ext. 366
Cable Tray Systems
BBA-2
Barrier Bridge
Loading Depth
3 = 3” (76mm) (4” Siderail)
4 = 4” (101mm) (5” Siderail)
5 = 5” (127mm) (6” Siderail)
6 = 6” (152mm) (7” or 8” Siderail)
Barrier Bridge
Horizontal Tee, Two Cable Runs
Cable Bridge
for ‘B’ Run
Straight Section Barrier
Barrier Bridge
Elevation Brace
Tee Fitting
Use the table on page BBA-4 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled with the radius of your fitting.
The box contains both the quantity and the catalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page BBA-11.
BBA-3
Cable Tray Systems
Barrier Bridge
Horizontal Tee, Two Cable Runs
Tray
Width
6”
(152mm)
9”
(228mm)
12”
(305mm)
18”
(457mm)
‘B’ Smaller
Cable Run
03
03
06
03
03
06
03
09
09
03
06
06
12
06
06
12
09
09
18
06
06
18
2 runs
12" and 12"
12
12
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
2 runs
24" and 06"
24
06
(1) : 7 # *-06-CB26
(2) : 7 # *-EB24
06
24
18
12
2 runs
12" and 18"
12
18
(1) : 7 # *-18-CB14
(3) : 7 # *-EB24
2 runs
30" and 06"
30
06
(1) : 7 # *-06-CB32
(2) : 7 # *-EB24
06
30
24
12
2 runs
12" and 24"
12
24
(1) : 7 # *-24-CB14
(3) : 7 # *-EB24
2 runs
18" and 18"
18
18
(1) : 7 # *-18-CB20
(3) : 7 # *-EB24
Description
2 runs
03" and 03"
2 runs
06" and 03"
2 runs
03" and 06"
2 runs
03" and 09"
2 runs
09" and 03"
2 runs
06" and 06"
2 runs
12" and 06"
2 runs
06" and 12"
2 runs
09" and 09"
24”
(609mm)
30”
(762mm)
2 runs
18" and 06"
2 runs
06" and 18"
2 runs
06" and 24"
2 runs
18" and 12"
2 runs
06" and 30"
2 runs
24" and 12"
12" (305mm)
(1) : 7 # *-03-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(1) : 7 # *-03-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB17
(2) : 7 # *-EB24
(1) : 7 # *-18-CB14
(3) : 7 # *-EB24
(1) : 7 # *-03-CB17
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB17
(2) : 7 # *-EB24
(1) : 7 # *-12-CB11
(2) : 7 # *-EB24
(1) : 7 # *-09-CB14
(2) : 7 # *-EB24
(1) : 7 # *-09-CB17
(3) : 7 # *-EB24
(1) : 7 # *-18-CB11
(2) : 7 # *-EB24
(1) : 7 # *-12-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB20
(2) : 7 # *-EB24
(1) : 7 # *-24-CB14
(3) : 7 # *-EB24
(1) : 7 # *-18-CB17
(3) : 7 # *-EB24
(1) : 7 # *-06-CB14
(2) : 7 # *-EB24
(1) : 7 # *-12-CB08
(2) : 7 # *-EB24
(1) : 7 # *-09-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB20
(2) : 7 # *-EB24
(1) : 7 # *-18-CB08
(3) : 7 # *-EB24
(1) : 7 # *-24-CB08
(3) : 7 # *-EB24
(1) : 7 # *-12-CB20
(2) : 7 # *-EB24
(1) : 7 # *-30-CB08
(3) : 7 # *-EB24
(1) : 7 # *-12-CB26
(2) : 7 # *-EB24
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
Cable Tray Systems
48" (1219mm)
BBA-4
Barrier Bridge
36”
(914mm)
Radius
24" (609mm)
36" (914mm)
‘A’ Larger
Cable Run
Barrier Bridge
Horizontal Tee, Three Cable Runs
Cable Bridge
for ‘B’ Run
Cable Bridge
for ‘C’ Run
Straight Section Barrier
Elevation Brace
Barrier Bridge
Tee Fitting
Use the tables below and on page BBA-6 to select parts needed to build your
Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled
with the radius of your fitting.
The box contains both the quantity and the catalog number of the parts
needed for the Barrier Bridge
4. Then select a hardware kit from page BBA-1.
Tray
Width
9”
(228mm)
12”
(305mm)
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
3 runs
03" / 03" / 03”
03
03
03
3 runs
06" / 03" / 03”
06
03
03
3 runs
03" / 03" / 06”
03
03
06
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB14
(1) : 7 # *-03-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB11
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-12-CB17
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-03-CB17
(1) : 7 # *-03-CB14
(2) : 7 # *-EB24
(1) : 7 # *-06-CB14
(1) : 7 # *-03-CB11
(3) : 7 # *-EB24
(1) : 7 # *-06-CB17
(1) : 7 # *-06-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-06-CB11
(4) : 7 # *-EB24
(1) : 7 # *-09-CB17
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-12-CB20
(1) : 7 # *-12-CB17
(4) : 7 # *-EB24
(1) : 7 # *-18-CB17
(1) : 7 # *-12-CB14
(4) : 7 # *-EB60
BBA-5
Cable Tray Systems
Barrier Bridge
Horizontal Tee, Three Cable Runs
Tray
Width
18”
(457mm)
24”
(609mm)
30”
(762mm)
(914mm)
3 runs
12" / 03" / 03”
3 runs
03" / 03" / 12”
3 runs
09" / 06" / 03”
3 runs
03" / 06" / 09”
3 runs
06" / 06" / 06”
3 runs
18" / 03" / 03”
3 runs
03" / 03" / 18”
3 runs
12" / 09" / 03”
3 runs
03" / 09" / 12”
3 runs
12" / 06" / 06”
3 runs
06" / 06" / 12”
3 runs
09" / 09" / 06”
3 runs
06" / 09" / 09”
3 runs
18" / 06" / 06”
3 runs
06" / 06" / 18”
3 runs
12" / 12" / 06”
3 runs
06" / 12" / 12”
3 runs
12" / 09" / 09”
3 runs
09" / 09" / 12”
3 runs
24" / 06" / 06”
3 runs
06" / 06" / 24”
3 runs
18" / 12" / 06”
3 runs
06" / 12" / 18”
3 runs
18" / 09" / 09”
3 runs
09" / 09" / 18”
3 runs
12" / 12" / 12”
12" (305mm)
Radius
24" (609mm)
36" (914mm)
12
03
03
(1) : 7 # *-03-CB17 (1) : 7 # *-03-CB14 (2) : 7 # *-EB24
03
03
12
(1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB24
09
06
03
(1) : 7 # *-03-CB17 (1) : 7 # *-06-CB11 (3) : 7 # *-EB24
03
06
09
(1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (4) : 7 # *-EB24
06
06
06
(1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (3) : 7 # *-EB24
18
03
03
(1) : 7 # *-03-CB23 (1) : 7 # *-03-CB20 (2) : 7 # *-EB24
03
03
18
(1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (4) : 7 # *-EB24
12
09
03
(1) : 7 # *-03-CB23 (1) : 7 # *-09-CB14 (3) : 7 # *-EB24
03
09
12
(1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (4) : 7 # *-EB24
12
06
06
(1) : 7 # *-06-CB20 (1) : 7 # *-06-CB14 (3) : 7 # *-EB24
06
06
12
(1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
09
09
06
(1) : 7 # *-06-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
06
09
09
(1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (4) : 7 # *-EB24
18
06
06
(1) : 7 # *-06-CB26 (1) : 7 # *-06-CB20 (3) : 7 # *-EB24
06
06
18
(1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
12
12
06
(1) : 7 # *-06-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB24
06
12
12
(1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB24
12
09
09
(1) : 7 # *-09-CB23 (1) : 7 # *-09-CB14 (4) : 7 # *-EB24
09
09
12
(1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
24
06
06
(1) : 7 # *-06-CB32 (1) : 7 # *-06-CB26 (3) : 7 # *-EB24
06
06
24
(1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (4) : 7 # *-EB24
18
12
06
(1) : 7 # *-06-CB32 (1) : 7 # *-12-CB20 (4) : 7 # *-EB24
06
12
18
(1) : 7 # *-18-CB20 (1) : 7 # *-12-CB08 (4) : 7 # *-EB24
18
09
09
(1) : 7 # *-09-CB29 (1) : 7 # *-09-CB20 (4) : 7 # *-EB24
09
09
18
(1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (4) : 7 # *-EB24
12
12
12
(1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (4) : 7 # *-EB24
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
Cable Tray Systems
48" (1219mm)
BBA-6
Barrier Bridge
36”
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
Barrier Bridge
Horizontal Cross, Two Cable Runs
Cable Bridge
for ‘B’ Run
Cable Bridge
for ‘B’ Run
Straight Section Barrier
Straight Section
Barrier
Barrier Bridge
Elevation Brace
Cross Fitting
Use the table on page BBA-8 to select parts needed to build your Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled with
the radius of your fitting. The box contains both the quantity and the
catalog number of the parts needed for the Barrier Bridge
4. Then select a hardware kit from page BBA-7.
BBA-7
Cable Tray Systems
Barrier Bridge
Horizontal Cross, Two Cable Runs
Tray
Width
6”
(152mm)
9”
(228mm)
12”
(305mm)
Description
2 runs
03" and 03"
2 runs
06" and 03"
2 runs
03" and 06"
2 runs
09" and 03"
2 runs
03" and 09"
2 runs
06" and 06"
18”
(457mm)
2 runs
12" and 06"
2 runs
06" and 12"
2 runs
09" and 09"
24”
(609mm)
2 runs
18" and 06"
2 runs
06" and 18"
2 runs
12" and 12"
30”
(762mm)
2 runs
18" and 18"
‘B’ Smaller
Cable Run
03
03
06
03
03
06
09
03
03
09
06
06
12
06
06
12
09
09
18
06
06
18
12
12
24
06
06
24
18
12
12
18
30
06
06
30
24
12
12
24
18
18
12" (305mm)
Radius
24" (609mm)
36" (914mm)
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB11
(2) : 7 # *-EB24
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB11
(3) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-06-CB11
(1) : 7 # *-03-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-06-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB11
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-18-CB14
(1) : 7 # *-12-CB17
(4) : 7 # *-EB60
(1) : 7 # *-09-CB11
(1) : 7 # *-03-CB17
(3) : 7 # *-EB24
(1) : 7 # *-12-CB11
(1) : 7 # *-06-CB17
(4) : 7 # *-EB24
(1) : 7 # *-18-CB11
(1) : 7 # *-09-CB17
(4) : 7 # *-EB60
(1) : 7 # *-24-CB14
(1) : 7 # *-12-CB20
(4) : 7 # *-EB60
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB14
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB14
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-18-CB17
(1) : 7 # *-18-CB17
(4) : 7 # *-EB60
(1) : 7 # *-12-CB08
(1) : 7 # *-06-CB14
(4) : 7 # *-EB24
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(4) : 7 # *-EB24
(1) : 7 # *-18-CB08
(1) : 7 # *-06-CB20
(4) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(4) : 7 # *-EB24
(1) : 7 # *-24-CB08
(1) : 7 # *-06-CB26
(4) : 7 # *-EB60
(1) : 7 # *-18-CB14
(1) : 7 # *-12-CB20
(4) : 7 # *-EB60
(1) : 7 # *-30-CB08
(1) : 7 # *-06-CB32
(4) : 7 # *-EB60
(1) : 7 # *-24-CB14
(1) : 7 # *-12-CB26
(4) : 7 # *-EB60
(1) : 7 # *-18-CB20
(1) : 7 # *-18-CB20
(4) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
Cable Tray Systems
48" (1219mm)
BBA-8
Barrier Bridge
36”
(914mm)
2 runs
24" and 06"
2 runs
06" and 24"
2 runs
18" and 12"
2 runs
12" and 18"
2 runs
30" and 06"
2 runs
06" and 30"
2 runs
24" and 12"
2 runs
12" and 24"
‘A’ Larger
Cable Run
Barrier Bridge
Horizontal Cross, Three Cable Runs
Cable Bridge 1
for ‘B’ Run
Cable Bridge
for ‘A’ Run
Cable Bridge
for ‘C’ Runs
Cable Bridge 2
for ‘B’ Run
Elevation Brace
Straight Section
Barrier
Straight Section
Barrier
Barrier Bridge
Cross Fitting
Use the tables below and on page BBA-10 to select parts needed to build your
Barrier Bridge
1. On the left, find the width of your tray system.
2. In the second column, select the width of you cable runs within the tray.
B-Line recommends that thicker cables are the ‘A’ run.
3. Move across the chart until you reach the column that is labeled
with the radius of your fitting.
The box contains both the quantity and the catalog number of the
parts needed for the Barrier Bridge
4. Then select a hardware kit from page BBA-9.
Tray
Width
9”
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
(228mm)
3 runs
03" / 03" / 03”
03
03
03
12”
3 runs
06" / 03" / 03”
06
03
03
3 runs
03" / 03" / 06”
03
03
06
(305mm)
12" (305mm)
Radius
24" (609mm)
36" (914mm)
48" (1219mm)
(1) : 7 # *-03-CB14
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB14
(3) : 7 # *-EB24
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB14
(5) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB14
(5) : 7 # *-EB60
(1) : 7 # *-12-CB17
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB17
(5) : 7 # *-EB60
(1) : 7 # *-06-CB14
(1) : 7 # *-03-CB11
(1) : 7 # *-03-CB14
(1) : 7 # *-03-CB17
(3) : 7 # *-EB24
(1) : 7 # *-09-CB14
(1) : 7 # *-06-CB11
(1) : 7 # *-06-CB14
(1) : 7 # *-06-CB17
(5) : 7 # *-EB24
(1) : 7 # *-12-CB14
(1) : 7 # *-09-CB11
(1) : 7 # *-09-CB14
(1) : 7 # *-09-CB17
(5) : 7 # *-EB60
(1) : 7 # *-18-CB17
(1) : 7 # *-12-CB14
(1) : 7 # *-12-CB17
(1) : 7 # *-12-CB20
(5) : 7 # *-EB60
BBA-9
Cable Tray Systems
Barrier Bridge
Horizontal Cross, Three Cable Runs
Tray
Width
18”
(457mm)
24”
(609mm)
30”
(762mm)
(914mm)
3 runs
12" / 03" / 03”
3 runs
03" / 03" / 12”
3 runs
09" / 06" / 03”
3 runs
03" / 06" / 09”
3 runs
06" / 06" / 12”
3 runs
18" / 03" / 03”
3 runs
03" / 03" / 18”
3 runs
12" / 09" / 03”
3 runs
03" / 09" / 12”
3 runs
12" / 06" / 06”
3 runs
06" / 06" / 12”
3 runs
09" / 09" / 06”
3 runs
06" / 09" / 09”
3 runs
18" / 06" / 06”
3 runs
06" / 06" / 18”
3 runs
12" / 12" / 06”
3 runs
06" / 12" / 12”
3 runs
12" / 09" / 09”
3 runs
09" / 09" / 12”
3 runs
24" / 06" / 06”
3 runs
06" / 06" / 24”
3 runs
18" / 12" / 06”
3 runs
06" / 12" / 18”
3 runs
18" / 09" / 09”
3 runs
09" / 09" / 18”
3 runs
12" / 12" / 12”
12" (305mm)
Radius
24" (609mm)
36" (914mm)
12
03
03
03
03
12
09
06
03
03
06
09
06
06
06
18
03
03
03
03
18
12
09
03
03
09
12
12
06
06
06
06
12
09
09
06
06
09
09
18
06
06
06
06
18
12
12
06
06
12
12
12
09
09
09
09
12
24
06
06
06
06
24
18
12
06
06
12
18
18
09
09
09
09
18
(1) : 7 # *-18-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB20
(1) : 7 # *-09-CB29 (5) : 7 # *-EB60
12
12
12
(1) : 7 # *-12-CB26 (1) : 7 # *-12-CB14 (1) : 7 # *-12-CB14
(1) : 7 # *-12-CB26 (5) : 7 # *-EB60
(1) : 7 # *-12-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB14
(1) : 7 # *-03-CB17 (5) : 7 # *-EB24
(1) : 7 # *-09-CB11 (1) : 7 # *-06-CB05 (1) : 7 # *-06-CB11
(1) : 7 # *-03-CB17 (5) : 7 # *-EB24
(1) : 7 # *-06-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB08
(1) : 7 # *-06-CB14 (5) : 7 # *-EB24
(1) : 7 # *-18-CB08 (1) : 7 # *-03-CB05 (1) : 7 # *-03-CB20
(1) : 7 # *-03-CB23 (5) : 7 # *-EB24
(1) : 7 # *-12-CB14 (1) : 7 # *-09-CB05 (1) : 7 # *-09-CB14
(1) : 7 # *-03-CB23 (5) : 7 # *-EB24
(1) : 7 # *-12-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB14
(1) : 7 # *-06-CB20 (5) : 7 # *-EB24
(1) : 7 # *-09-CB17 (1) : 7 # *-09-CB08 (1) : 7 # *-09-CB11
(1) : 7 # *-06-CB20 (5) : 7 # *-EB24
(1) : 7 # *-18-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB20
(1) : 7 # *-06-CB26 (5) : 7 # *-EB60
(1) : 7 # *-12-CB20 (1) : 7 # *-12-CB08 (1) : 7 # *-12-CB14
(1) : 7 # *-06-CB26 (5) : 7 # *-EB60
(1) : 7 # *-12-CB20 (1) : 7 # *-09-CB11 (1) : 7 # *-09-CB14
(1) : 7 # *-09-CB23 (5) : 7 # *-EB60
(1) : 7 # *-24-CB14 (1) : 7 # *-06-CB08 (1) : 7 # *-06-CB26
(1) : 7 # *-06-CB32 (5) : 7 # *-EB60
(1) : 7 # *-18-CB20 (1) : 7 # *-12-CB11 (1) : 7 # *-12-CB20
(1) : 7 # *-06-CB32 (5) : 7 # *-EB60
# = Loading Depth of Tray System – 3", 4", 5", 6"
* = Material (A = aluminum, P = pregalvanized steel, G = hot dip galvanized steel, SS6 = stainless steel 316)
(1, 2, 3, 4 or 5) = Quantity
Cable Tray Systems
48" (1219mm)
BBA-10
Barrier Bridge
36”
‘A’ Larger ‘B’ Medium ‘C’ Smaller
Description Cable Run Cable Run Cable Run
Barrier Bridge
Hardware Kits
Fitting
HX - 2 runs
HX - 3 runs
HT - 2 runs
HT - 3 runs
Redi-Rail/Series 2-5 Aluminum
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
Series 1 Pre-Galv
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
Alternating Strut Rung
7ZN-HK2
7ZN-HK3
7ZN-HK4
7ZN-HK5
Up Strut Rung
7ZN-HK2
7ZN-HK3
7ZN-HK4
7ZN-HK5
Down Strut Rung
7ZN-HK1
7ZN-HK1
7ZN-HK1
7ZN-HK1
7SS-HK1
7SS-HK1
7SS-HK1
7SS-HK1
Alternating Strut Rung
7SS-HK2
7SS-HK3
7SS-HK4
7SS-HK5
Up Strut Rung
7SS-HK2
7SS-HK3
7SS-HK4
7SS-HK5
Down Strut Rung
7SS-HK1
7SS-HK1
7SS-HK1
7SS-HK1
Series 2-5
Pre-Galv
Series 1 HDG
Barrier Bridge
Series 2-5
HDG &
Stainless Steel
Catalog Number
Hardware
7ZN-HK1
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
7ZN-HK2
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(7) 9ZN-1204NB Hold-Down Clamps
7ZN-HK3
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(10) 9ZN-1204NB Hold-Down Clamps
7ZN-HK4
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(5) 9ZN-1204NB Hold-Down Clamps
7ZN-HK5
(60) PPHSD #10 x 1/2 ZN Self-Drilling Phillips Head Screws
(8) 9ZN-1204NB Hold-Down Clamps
7SS-HK1
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
7SS-HK2
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(7) 9SS6-1204NB Hold-Down Clamps
7SS-HK3
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(10) 9SS6-1204NB Hold-Down Clamps
7SS-HK4
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(5) 9SS6-1204NB Hold-Down Clamps
7SS-HK5
(60) PPHSD #10 x 1/2 SS410 Self-Drilling Phillips Head Screws
(8) 9SS6-1204NB Hold-Down Clamps
Visit the Barrier Bridge webpage for additional tools and resources:
• Installation instructions
• CAD details
• Submittal sheets
www.cooperbline.com/barrier-bridge
BBA-11
Cable Tray Systems
Barrier Bridge
The Barrier Bridge Solution
Barrier Bridge is an ideal solution for keeping cable runs divided at horizontal tees and
crosses. Cables are separated for code compliance, protection, and organization. Keeping
cables separate at fittings has always been a challenge, but the process is now simplified
with the Barrier Bridge.
Benefits of the product include:
• Code Compliance:
Eliminate questions on the jobsite with an obvious and visible solid metal barrier
between cable types.
• Cable Protection:
Minimize the potential for signal interference at the weakest link – the intersection.
• Design Simplicity:
Make your design intention clear with available CAD details, template specifications,
and submittal data sheets.
• Labor Savings:
Speed up your installation by having a plan for intersections and having the right
pieces and parts for each fitting.
In addition, the Barrier Bridge solution offers the
following features:
• Slots for easy attachment of cable ties
• Raised sides of top level to retain cables
• Smooth, hemmed edges to protect cable
• Installation steps that use standard tools
Cable Tray Systems
BBA-12
Barrier Bridge
• Pre-engineered products for two (2) or
three (3) cable runs