Metering MPV-15 Meter adapter for solar/PV pre-disconnect input taps The fastest solution on the market for adding a "line side tap" onto existing service. Works with any single phase UL listed, installed meter socket. • Interfaces with existing 4 jaw meter sockets • Designed for two-way buy/sell meters • Left or right orientation • 200A max amp rating* • UL listed • NEMA 3R construction • Dual rated aluminum/copper wire lugs • #3-250 MCM wire range • Ring Type only Catalog # Max PV Input Existing Meter Solar Access MARR20L45GR1S 200A* Surface Mount MARR20L45GR1S/F 200A* Flush Mount Connections Overall Dimensions PV & Neutral Ground Height (in) Width (in) Depth (in) Neutral OH/UG #3 - 250 MCM #14 - 1/0 8 1/8" 19" 6" Bonded OH/UG #3 - 250 MCM #14 - 1/0 8 1/8" 19" 6" Bonded * MARR solar adapter is capable of carrying 200A max solar output, however this is limited to the maximum capabilities of the existing service Not approved by Pacific Gas & Electric Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2015 Eaton All Rights Reserved Printed in USA Publication No. MPV-15 May 2015 B-Line Division 509 West Monroe Street Highland, IL 62249 United States Phone: 800-851-7415 www.cooperbline.com/contactus Eaton is a registered trademark. All other trademarks are property of their respective owners.