D1 1.5" SF-9.5A D1 2% D2 2'-0" 6" VALLEY COMPACTED CABC D3* OR I-2 2% GUTTER SUBGRADE (TYP.) ALLEY WITH NORMAL CROWN 0.5% 1.5" SF-9.5A OR I-2 2% 0.5% 2% 10' MIN. (TYP.) A GARAGE 6" 1'-0" CABC CONCRETE STRIP (TYP.) (OPTIONAL) 5' MIN. COMPACTED SUBGRADE D4* ALLEY WITH INVERSE CROWN NOTES: PARKING 1. SUBGRADE SHALL BE COMPACTED TO PUBLIC STREET STANDARDS. 2. STORM DRAINAGE (NOT SHOWN) SHALL BE PROVIDED AS NECESSARY. PAD 3. PARKING PAD* 4. 2'-0" VALLEY GUTTER OR 20' CLEAR (SEE NOTE 5) PLAN 5. A D1 D2 D3 D4 45° 24' 17' 5'-7'* 20' 60° 26.5' 17.8' 5'-7'* 20' LAND DEVELOPMENT STANDARDS INCLUDES CHARLOTTE ETJ CODE. MINIMUM DIMENSIONS: CITY OF CHARLOTTE DRIVEWAYS SHALL BE SEPARATED BY AT LEAST 5 FEET, OR GREATER IF REQUIRED BY PLANNING (LOT SIZE) REQUIREMENTS AND/OR N.C. BUILDING 1'-0" CONCRETE STRIP 12' ALLEYS SHALL BE CONSIDERED PRIVATE EASEMENTS AND WILL NOT BE ACCEPTED FOR MAINTENANCE BY THE CITY OF CHARLOTTE. DETAIL APPLIES TO SINGLE- OR DOUBLE-LOADED ALLEYS. FOR SINGLE-LOADED ALLEYS, THERE SHALL BE A 20-FOOT CLEAR ZONE FREE OF CUT SLOPES, OBSTRUCTIONS, HEDGES, ETC. FROM THE LOADED SIDE EDGE OF PAVEMENT. * WITH NO PARKING PAD, DIMENSION D3 IS REQUIRED TO BE MINIMUM 5' BUT NO GREATER THAN 7'. WITH PARKING PAD, DIMENSION D4 IS REQUIRED TO BE A MINIMUM OF 20'. NOT TO SCALE RESIDENTIAL ALLEY DETAIL 0NE-WAY OPERATION STD. NO. REV. 11.19A 10