Technical Specification
for Sustainability
John Smiciklas
Director, Corporate Responsibility Programs
Research In Motion
International
Telecommunication
Union
Committed to Connecting the World
Collaboration with ICT
Industry & UN Agencies
 Technical Specifications
for Sustainability
Standard
for the ICT Sector
 The project will focus on
development of a standardized
checklist of sustainability
requirements specific to the ICT
sector that will become a
contribution to ITU-T Study
Group 5 with the goal of
developing a global standard in
this area.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
ITU
UNEP
RIM
Climate Associates
Alcatel Lucent
Huawei
Microsoft
UNEP Basel convention
CEDARE
Step Initiative
BBC
European Broadcasting Union (EBU)
Verizon
Telefónica
Telecom Italia
France Telecom
United Nations University (UNU)
BIO Intelligence Service
Datec Technology
Ernst & Young
Vodafone Ghana
3p Institute for Sustainable Management
Dell
MicroPro Computers
PE INTERNATIONAL AG
ETNO
Thomson Reuters
Infosys
BT
Alcatel Lucent
Imperial College
July 2011
Committed to Connecting the World
Purpose
 The goal is to develop a set of
agreed upon sustainability
characteristics for ICT companies
that will allow for a more objective
review of how sustainability is
practiced in the ICT sector.
 These indicators will give
sustainability performance
guidance to the ICT Sector in
these key areas:
July 2011
Committed to Connecting the World
Areas of Focus
 Sustainable Buildings
 How ICT companies operate their physical plant
 Sustainable ICT
 How ICT companies operate their ICT operations
 Sustainable Products
 How ICT companies design and manufacture and
manage end of life for products
 Sustainable Services
 How ICT companies design and deliver services
 End of Life
 How to secure an environmentally sustainable solution
for ICT equipment’s EOL
July 2011
Committed to Connecting the World
Sustainable Buildings
 Provides technical guidance on
environmentally conscious design,
maintenance, repair and operating
principles and best practices as to
how ICT companies build, operate
and maintain their physical
facilities
July 2011
Committed to Connecting the World
Sustainable Buildings
Standard covers 4 main areas:
oDesign and Build Specifications
oBuilding Maintenance, Repair and
Operations
oBuilding Improvement and
Renovation
oTechnical Buildings and Outside Plant
 Focus is on collecting information
on existing standards and
examples of best practice
July 2011
Committed to Connecting the World
Sustainable ICT
 Provides technical guidance on
environmentally conscious design,
maintenance, repair and operating
principles and best practices as to
how ICT companies build, operate
and maintain their physical
facilities
July 2011
Committed to Connecting the World
Sustainable ICT
 Areas of Focus
Data Centre design and
operation
Data Centre Co-location
Internal Networks
External Networks
Desktop/Client management
Customer Service operation
July 2011
Committed to Connecting the World
Sustainable Products
 Provides technical guidance on environmentally
conscious design principles and best practices as
to how ICT companies can provide products that
are more “environmentally conscious” throughout
their full life cycle
 Initial version stops short of full sustainable design
(which would encompass social and ethical
aspects)
 Standard covers 3 main areas:
o ICT network infrastructure equipment (NIE)
o ICT customer premises equipment (CPE)
o ICT life cycle assessment (LCA) methodologies, standards, lifecycle thinking approaches, estimators, tools, databases
July 2011
Committed to Connecting the World
Sustainable Products
July 2011
Committed to Connecting the World
Sustainable Products
 Document layout:
o Scope
o General References to Other Standards / Work Streams
o Best Environmental Practices











General Principles and Guidance
Specific Guidance
Product Value / Lifetime Extension
Energy Efficiency
Substances and Materials
Emissions
Batteries
Product Packaging / Packing
Designing for End-of-Life Treatment
Checklists
Metrics
July 2011
Committed to Connecting the World
Sustainable Products
 Best Practice example – general guidance
o Ensure inputs and outputs in the product life cycle that do not cause
environmental degradation or adversely affect human health by:
 installing protection against release of pollutants and hazardous substances
 specifying non-hazardous and otherwise environmentally “clean” substances,
especially in regards to user health
 ensuring that wastes are water-based and biodegradable
 specifying the cleanest source of energy
 specifying clean production processes for the product and in selection of
components
 Best Practice example – specific guidance
o Product Value / Lifetime Extension: Durability - ensure appropriate
durability of the product and components by:
 reusing high-embedded energy components
 improving aesthetics and functionality to ensure the aesthetic life is equal to the
technical life
 ensuring minimal maintenance and minimizing failure modes in the product and
its components
 specifying better materials, surface treatments, or structural arrangements to
protect products from dirt, corrosion, and wear
 indicating on the product which parts are to be cleaned/maintained in a specific
July 2011
way
Committed to Connecting the World
Sustainable Services
 This document offers both best practices and a checklist in the
area of sustainable services. The users of this checklist will be
designers of services, organizations involved in the marketing,
transmission and use services.
 The purpose is to increase awareness of the greenhouse gas
(GHG) emissions and the impact of the introduction and use
of a service (e.g. the increase or decrease of the carbon
footprint) and to record measures taken to minimize the GHG
impact.
 A key consideration is the switch from one system to another
and its consequences on the carbon economy(e.g. TV
programmes delivered by the broadcast network versus
download via the telecommunications network).
July 2011
Committed to Connecting the World
Sustainable Services
 Two categories of services are defined and
considered in this section which includes examples
of best practices these are telecommunications
services and broadcast services.
Telecommunication services include voice, video
and data services and interactive services (e.g.
telephony, text, web-based and IPTV), growth of
cloud and server/data centre services, on-demand
services. Broadcast services include
analogue/digital, satellite, terrestrial and point to
multi-point.
July 2011
Committed to Connecting the World
Sustainable Services
July 2011
Committed to Connecting the World
End of Life
 This section aims to give directions on how
to secure an environmentally sustainable
solution for ICT equipment’s EOL by
generating a checklist to allow us to record
an increasing awareness on human health
and environmental impacts generated by
those products/services at this stage of the
end of its life cycle.
July 2011
Committed to Connecting the World
End of Life
 Describing the End-of-life- management stages and
their hierarchy based on the principle of waste
prevention (e.g. Reuse, Recycle, Recovery of
metals, Refurbishment, Disposal) as an contribution
of an industry that works to reduce climate change
and encourage friendly environmental practices.
 Identifiying the effects over social, economic and
environmental aspects generated by EOL
management of ICT equipment over
 Identifying the offsetting opportunities for CO2 and
other GHG
July 2011
Committed to Connecting the World
End of Life
 The section also aims to look at the different
initiatives for EOL management of
operational/infrastructure or end user equipment
taken by organization, especially the selection of a
sustainable EOL solution action that targets the
extended responsibility for ICT products on a local,
national, regional and global scale, also the aspects
to be aware of when selecting an EOL management
company capable to deliver following the same
sustainable goal approached by the industry
July 2011