8
6
7
5
4
2
3
REVISIONS
ZONE REV.
-
.16 .54
10-32 UNF - 3B
.34
C'SINK
60° TO .22
2 PLCS. TYP.
D
.07
.24
2-56 UNC - 3B
.19
6 PLCS. ON 1.940 B.C.
4
8
.0005
2.11
C
1.760
DESCRIPTION
ORIGINAL RELEASE
DATE
APPROVED
11/6/03
NNC
D
.09
.35
4-40 UNC - 3B
.22
6 PLCS. ON 1.680 B.C.
1.390
1.112
1
.16
.810
10-32 UNF - 3B
.61
C'BORE
.344
.270
C'SINK 60 TO .22
6 PLCS. ON 1.680 B.C.
SHARP
CORNERS
C
.14
5
32
.90
32.34° REF.
.20
.40
B
B
.32
.64
2.220
.640
-001
-001
QTY
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
3. MACHINED SFCS. TO BE 63√ UNLESS OTHERWISE NOTED.
5
DO NOT SCALE DRAWING
MATERIAL
LAP ON FLAT SURFACE USING 320 GRIT FOLLOWED BY 600 GRIT EMERY PAPER.
PAINT THIS SFC. BLACK WITH CHEMGLAZE Z306 PER 8300-0013.
8
7
6
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
2. DRILL & TAP ALL HOLES PRIOR TO FINISH MACHINING OF INNER SURFACE.
4
PARTS LIST
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
1. BREAK SHARP EDGES & CORNERS .01-.02 UNLESS OTHERWISE NOTED.
MADISON, WISCONSIN
TITLE:
GIFTS
BLACKBODY CAVITY BARREL
DETAIL
DRAFTER
6061-T651
ALUMINUM
DPA
NEXT HIGHER ASSEMBLY
DATE
10/28/03
8300-0010
FILENAME
8300-0011.orig.slddrw
5
4
ITEM
DESCRIPTION
PART NO.
ASSY NO.
NOTES:
A
BARREL
3
CHECKER
PRODUCT ASSURANCE
NNC
SCALE
1.5:1
SIZE
B
2
SHEET
DATE
DATE
ENGINEER
DATE
PROJECT APPROVAL
11/6/03
1 OF 1
DPA
10/28/03
FAB
11/6/03
DRAWING NO.
DATE
8300-0011
1
8
7
6
5
4
2
3
1
REVISIONS
ZONE REV.
-
DESCRIPTION
ORIGINAL RELEASE
DATE
APPROVED
11/6/03
NNC
.0005
D
.001
D
.104
6 PLCS. EQ. SP.
ON 1.936 B.C.
8
.571
4
SHARP CORNERS
.015
C
1.72
1.20
1.760
1.000
C
2.110
34.35° REF.
5
.25
32
.089 X .19 DEEP
BOTTOM TAP #4-40UNC-3B
4 PLCS. EQ. SP. ON 1.500 B.C.
B
B
5
-001
-001
PART NO.
QTY
PARTS LIST
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
1. BREAK SHARP EDGES & CORNERS .02 UNLESS OTHERWISE NOTED.
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
2. DRILL & TAP ALL HOLES PRIOR TO FINISH MACHINING OF INNER SURFACE.
3. MACHINED SFCS. TO BE 63√ UNLESS OTHERWISE NOTED.
MADISON, WISCONSIN
TITLE:
DO NOT SCALE DRAWING
4
LAP ON FLAT SURFACE USING 320 GRIT FOLLOWED BY 600 GRIT EMERY PAPER.
5
PAINT THIS SFC. BLACK WITH CHEMGLAZE Z306 PER 8300-0013.
MATERIAL
6061-T651
ALUMINUM
GIFTS
BLACKBODY CAVITY CAP
DETAIL
DRAFTER
DPA
NEXT HIGHER ASSEMBLY
DATE
11/6/03
8300-0010
FILENAME
8300-0012.orig.slddrw
8
7
6
5
4
ITEM
DESCRIPTION
ASSY NO.
NOTES:
A
CAP
3
A
DATE
CHECKER
DPA
DATE
PROJECT APPROVAL
FAB
11/6/03
PRODUCT ASSURANCE
NNC
SCALE
1:1
DATE
ENGINEER
SIZE
SHEET
B
1 OF 1
2
DRAWING NO.
11/6/03
DATE
11/6/03
8300-0012
1
8
6
7
5
4
2
3
1
REVISIONS
ZONE REV.
-
DATE
DESCRIPTION
APPROVED
ORIGINAL RELEASE
.125
6 PLCS. EQ. SP.
ON 2.600 B.C.
D
.438
6 PLCS. EQ. SP.
ON 1.350 B.C.
D
R.15
.064
1.270
C
C
2.984
R.030
2.014
2.932
.22
.125
6 PLCS. EQ. SP.
.75
B
.219
6 PLCS. EQ. SP.
ON 2.440 B.C.
.22
.050
.22
.790
2.028
.290
6 PLCS. EQ. SP.
ON 2.510 B.C.
.136
6 PLCS. EQ. SP.
ON 2.580 B.C.
-001
SUPPORT TUBE
PART NO.
QTY
PARTS LIST
THE UNIVERSITY OF WISCONSIN
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
A
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
1. BREAK SHARP EDGES & CORNERS .01-.02 UNLESS OTHERWISE NOTED.
2. MACHINE FROM STOCK TO WITHIN .03-.05 OF FINISHED DIMENSIONS WITHOUT HOLES
THEN ANNEAL 1 HOUR AT 250°F WITH 50°F PER HOUR HEAT UP AND COOL DOWN.
3. USE ONLY AIR OR WATER AS COOLANT DURING MACHINING.
MADISON, WISCONSIN
TITLE:
DO NOT SCALE DRAWING
MATERIAL
GIFTS
BLACKBODY CAVITY SUPPORT TUBE
DETAIL
DRAFTER
NORYL GFN3
3" ROUND
DPA
NEXT HIGHER ASSEMBLY
DATE
12/03/03
8300-0010
FILENAME
8300-0014.031203.slddrw
8
7
6
5
4
ITEM
DESCRIPTION
ASSY NO.
UNLESS OTHERWISE SPECIFIED:
NOTES:
B
3
A
CHECKER
DATE
ENGINEER
PRODUCT ASSURANCE
DATE
PROJECT APPROVAL
SCALE
1:1
SIZE
SHEET
B
1 OF 1
2
DATE
DPA
DRAWING NO.
12/03/03
DATE
8300-0014
1
REVISIONS
REV.
DESCRIPTION
-
DATE
APPROVED
ORIGINAL RELEASE
Ø.094 THRU
TAP FOR HELICAL INSERT
2-56 UNC - 3B X .190 MIN. DEPTH
V Ø.10 X 120°
2 PLCS.
.317
V
.120 THRU
TAP FOR HELICAL INSERT
4-40 UNC - 3B THRU
.150 X 120°, BOTH SIDES
20.0°
15.0°
.226
.02
.197
15.0°
20.0°
.109
2-56 UNC - 3B THRU
.109
R1.497
-001
ENCLOSURE TAB
PART NO.
QTY
PARTS LIST
ASSY NO.
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
NOTES:
1. FILLET ALL OUTSIDE CORNERS .03.
2. MACHINED SFCS. TO BE 63√ UNLESS OTHERWISE NOTED.
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
MADISON, WISCONSIN
TITLE:
DO NOT SCALE DRAWING
MATERIAL
6061-T6
ALUMINUM
ITEM
DESCRIPTION
GIFTS
BLACKBODY ENCLOSURE TAB
DETAIL
DRAFTER
DPA
NEXT HIGHER ASSEMBLY
FILENAME
DATE
3/10/04
8300-0010
CHECKER
DATE
PRODUCT ASSURANCE
DATE
8300-0015.040310.slddrw
NNC
SCALE
3:1
SIZE
B
SHEET
1 OF 1
ENGINEER
DPA
PROJECT APPROVAL
FAB
DRAWING NO.
DATE
DATE
8300-0015
REVISIONS
REV.
.125 THRU
.281
.007
4X EQ. SP.
DATE
DESCRIPTION
APPROVED
ORIGINAL RELEASE
.096 THRU
.281
.007
12X EQ. SP.
.156
3.833
45°
3.120
.95
2.994
1.80
.50
5.67
PART NO.
QTY
TUBE
-001
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
NOTES:
1. BREAK SHARP EDGES .01-.02 EXCEPT HOLES
2. OUTSIDE AND INSIDE DIAMETERS TO BE √32
MADISON, WISCONSIN
GIFTS
BLACKBODY ENCLOSURE TUBE
DETAIL
TITLE:
DO NOT SCALE DRAWING
MATERIAL
6061-T6
ALUMINUM
ITEM
DESCRIPTION
PARTS LIST
ASSY NO.
DRAFTER
DPA
NEXT HIGHER ASSEMBLY
FILENAME
DATE
3/16/04
8300-0010
8300-0016.040316.slddrw
CHECKER
DATE
PRODUCT ASSURANCE
DATE
NNC
SCALE
1:1
SIZE
C
SHEET
1 OF 1
ENGINEER
DPA
FAB
DATE
PROJECT APPROVAL
DRAWING NO.
DATE
8300-0016
REVISIONS
REV.
DESCRIPTION
-
DATE
APPROVED
ORIGINAL RELEASE
.280
.120 THRU
.155 X 120°
TAP FOR #4-40UNC-3B HELICAL INSERT
4 PLCS. EQ. SP.
.200
A
3.12
2.990
1.125
1.375
R.008
.156
70°
.010
.090
R.005
DETAIL A (5 : 1)
.093
.375
-001
COVER
PART NO.
QTY
PARTS LIST
ASSY NO.
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
MADISON, WISCONSIN
TITLE:
DO NOT SCALE DRAWING
NOTES:
1. BREAK SHARP EDGES .01-.02, EXCEPT INNER DIAMETER
2. MACHINED SURFACES TO BE √32 EXCEPT INNER DIAMETER
MATERIAL
6061-T6
ALUMINUM
ITEM
DESCRIPTION
GIFTS
BLACKBODY FRONT COVER
DETAIL
DRAFTER
DPA
NEXT HIGHER ASSEMBLY
FILENAME
DATE
3/18/04
8300-0010
CHECKER
DATE
PRODUCT ASSURANCE
DATE
8300-0017.040318.slddrw
NNC
SCALE
1.5:1
SIZE
B
SHEET
1 OF 1
ENGINEER
DPA
PROJECT APPROVAL
FAB
DRAWING NO.
DATE
DATE
8300-0017
REVISIONS
REV.
.120
.318, BOTTOM TAP FOR
#4-40-3B HELICAL INSERT .25 MIN. DEPTH
2 PLCS.
APPROVED
ORIGINAL RELEASE
-
6X
.188 THRU ALL
EQ. SP. ON 2.600 B.C.
DATE
DESCRIPTION
6X
.129 THRU ALL
.344
.140
EQ. SP. ON 2.580 B.C.
4X .204 THRU
EQ. SP. ON 3.500 B.C.
R.10 TYP.
.250
.050
R.125
.094 THRU
45.0°
60.0°
1.56
.025 TYP.
3.950
.80
R.10 TYP.
1.312
1.100 4.
3.12
.550
R1.165
1.70
.656
R1.450
.25
.032
1.56
.29
3.12
.250
.750
4X .41 BOSS
EQ. SP. ON 3.50 B.C.
NOTES:
1. USE ONLY AIR OR WATER AS COOLANT DURING MACHINING.
PART NO.
QTY
4. DRILL & TAP FOR HELICOILS PRIOR TO MACHINING THIS DIMENSION TO PREVENT DISTORTION.
5. AFTER MACHINING ANNEAL 2 HOURS AT 250 +/- 5 °F WITH 62 °F PER HOUR HEAT UP AND COOL DOWN.
BASE
THE UNIVERSITY OF WISCONSIN
UNLESS OTHERWISE SPECIFIED:
SPACE SCIENCE & ENGINEERING CENTER
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/64
ANGULAR: MACH 1/2
BEND 2
TWO PLACE DECIMAL
0.010
THREE PLACE DECIMAL 0.005
MADISON, WISCONSIN
GIFTS
BLACKBODY MOUNTING BASE
DETAIL
TITLE:
DO NOT SCALE DRAWING
MATERIAL
NORYL GFN3
1" PLATE
ITEM
DESCRIPTION
PARTS LIST
ASSY NO.
2. BREAK OUTSIDE EDGES & CORNERS .01-.02 EXCEPT HOLE EDGES UNLESS OTHERWISE SPEC'D.
3. INSIDE CORNERS TO BE .03-.04 RADIUS UNLESS OTHERWISE SPEC'D.
-001
DRAFTER
DPA
NEXT HIGHER ASSEMBLY
FILENAME
DATE
3/17/04
8300-0010
CHECKER
DATE
PRODUCT ASSURANCE
DATE
8300-0018.040317.slddrw
NNC
SCALE
1.5:1
SIZE
C
SHEET
1 OF 1
ENGINEER
DPA
FAB
DATE
PROJECT APPROVAL
DRAWING NO.
2/17/04
DATE
8300-0018