Lenntech
info@lenntech.com
www.lenntech.com
Tel. +31-15-261.09.00
Fax. +31-15-261.62.89
IMAC ® H P661
W eak Base Anion Exchange Resin
PRO DU CT DAT A SH EET
IMAC H P661 is a weak base an ion exch an ge
resin h avin g tertiary amin e fun ction al groups on
a macroreticular polystyren e matrix. It combin es
ch emical, ph ysical an d osmotic stability with th e
capability of reversibly adsorbin g large organ ic
molecules.
IMAC H P661 is design ed to produce ( in
combin ation with IMAC H P1110 Na or
AMBERLITE SR1L Na) partially demin eralised
water for food processin g. Such water will be free
from cation s ( Ca 2+, Mg2+, Na +, K+) an d stron g
an ion s ( Cl–, SO 42–, NO 3–) . It can subsequen tly be
blen ded with un treated water in order to
ach ieve th e required level of total dissolved
solids. Th e exh austed IMAC H P661 can be
regen erated with dilute caustic soda solution .
PROPERTIES
Matrix ___________________________________
Polystyren e divin ylben zen e copolymer
Fun ction al groups__________________________
-N ( R) 2
Ph ysical form______________________________
Opaque beads
Ion ic form as sh ipped_______________________
Free Base ( FB)
Total exch an ge capacity
[1]
Moisture h oldin g capacity
__________________
[1]
_________________
≥ 1.40 eq/ L ( FB form)
50 to 58 % ( FB form)
Sh ippin g weigh t ___________________________
640 g/ L
Specific gravity ____________________________
1.025 to 1.055 ( FB form)
Particle size
H armon ic mean size ________________________
480 to 700 µm
Un iformity coefficien t ______________________
≤ 1.70
Fin es con ten t
[1]
___________________________
< 0.300 mm : 1.0 % max
Coarse beads ______________________________
> 1.000 mm : 5.0 % max
Maximum reversible swellin g_________________
FB → Cl : 45 %
[1]
Contractual value
Test methods available upon request
©2000 Rohm and Haas Company
ITS 0197 A - March 98 - 1/2
QUALITY CONTROL
COMMISSIONING
All IMAC H P resin s are man ufactured an d
purified specially for use in n on in dustrial
application s. Every batch of IMAC H P661 is
an alysed to en sure its complian ce with h igh
purity specification s, in particular :
IMAC H P661 is ready to use* : all th at is required
at th e time of commission in g is to perform a full
regen eration cycle followed by a rin se with at
least 20 bedvolumes of water.
Th is is valid on ly if :
• Ph ysical an d ch emical properties,
• In dividual release of certain substan ces in
th e treated water,
• Global release of organ ic substan ces
expressed in TO C ( Total O rgan ic Carbon ) ,
• Total microbial coun t.
1.
2.
th e resin is stored at a temperature of less
th an 25°C an d protected from UV
radiation s,
th e storage time between production date
( prin ted on th e bags) an d fin al use does n ot
exceed 6 mon th s.
All our products are produced in ISO 9002 certified man ufacturin g facilities.
AMBERJET is a trademark of Rohm and Haas Company and its affiliates, Philadelphia, U.S.A.
Ion exchange resins and polymeric adsorbents, as produced, contain by-products resulting from the manufacturing process. The user must determine the extent to which
organic by-products must be removed for any particular use and establish techniques to assure that the appropriate level of purity is achieved for that use. The user must
ensure compliance with all prudent safety standards and regulatory requirements governing the application. Except where specifically otherwise stated, Rohm and Haas
Company does not recommend its ion exchange resins or polymeric adsorbents, as supplied, as being suitable or appropriately pure for any particular use. Consult your Rohm
and Haas technical representative for further information. Acidic and basic regenerant solutions are corrosive and should be handled in a manner that will prevent eye and skin
contact. Nitric acid and other strong oxidising agents can cause explosive type reactions when mixed with Ion Exchange resins. Proper design of process equipment to prevent
rapid buildup of pressure is necessary if use of an oxidising agent such as nitric acid is contemplated. Before using strong oxidising agents in contact with Ion Exchange Resins,
consult sources knowledgeable in the handling of these materials.
Rohm and Haas Company makes no warranties either expressed or implied as to the accuracy or appropriateness of these data and expressly excludes any liability upon Rohm and
Haas arising out of its use. We recommend that the prospective users determine for themselves the suitability of Rohm and Haas materials and suggestions for any use prior to their
adoption. Suggestions for uses of our products of the inclusion of descriptive material from patents and the citation of specific patents in this publication should not be understood as
recommending the use of our products in violation of any patent or as permission or license to use any patents of the Rohm and Haas Company and its affiliates. Material Safety Data
Sheets outlining the hazards and handling methods for our products are available on request.
©2000 Rohm and Haas Company
ITS 0197 A - March 98 - 2/2