Symphony
Low Voltage MiniTrack
Catalog No.
Type
Specifications/Features
Project
Symphony Mini-Track System
Perfect for residential and commercial spaces that require a very
low profile lighting system.
Solid 10 gauge copper conductors with Noryl insulators placed in
heavy guage extruded aluminum channels for durability and
system integrity. Symphony Mini-track will not degrade or warp
like plastic track systems.
The Mini-track system offers true versatility with a variety of
power feed, connection and support accessories.
Installation
The 2', 4' and 6' sections are pre-drilled with two mounting holes
and the 8' section has three mounting holes.
Track sections may be cut in the field, but take care to back out
the bus bar before cutting.
Every track section is supplied with an MLA-1 End Feed Connector/Cover and an MLA-11 End Cap.
Polarity is not an issue with low voltage lighting.
7/16"
Electrical
Maximum power ratings are 300W at 12 Volts or 600W at 24
Volts for higher power requirements.
Rated for 25 Amps.
All track sections are supplied with (1) MLA-11, insulated end
cap, and (1) MLA-1 end feed connector and cover.
13/16"
Warranty
Symphony Mini-track is covered by ConTech’s full one (1) year
replacement guarantee after date of purchase.
Listing
cULus listed. Suitable for dry locations.
Ordering Information
Example Order:
1-847-559-5500
M LT-8
P
Track Length
Finish
MLT-2 MLT-4 MLT-6 MLT-8 -
B
P
S
U
2' Length, 20 5/8" L
4' Length, 44 5/8" L
6' Length, 68 5/8" L
8' Length, 92 5/8" L
www.contechlighting.com
Please
-
Black
White
Silver
Unfinished Aluminum
Recycle
All specifications subject to change without notice.