RL16
Catalog No.
4" Line Voltage MR16
New Construction Housing
Type
Project
Specifications/Features
Housing/Mounting
Compact 4" downlight housing for new construction applications.
For dry wall, plaster or suspended ceilings.
Housing height is internally adjustable with slotted screws.
Aluminum reflector (lamp cover) provided.
Lamp/Electrical
(1) 45W 120V MR16 lamp, GU8.0 base (max).
Lamp not supplied with fixture. Must be ordered separately.
Junction Box has (4) 1/2" pry-outs with spring latch access plates.
Thermally protected.
Trims
Many different trims options are available to complement any
design style. See “Trims for 4" Line Voltage Recessed Housings”
spec sheet for selection and ordering information.
On trims designed for use with MR16 lamps, Con-Tech Lighting
provides a clear, tempered safety glass. This safety glass should
only be used with open MR16 lamps, and not used with MR16
lamps that contain an integral glass lens.
5-1/2"
Warranty
This fixture is covered by Con-Tech’s full one (1) year replacement
guarantee after date of purchase.
5-1/4"
Labels/Usage
cULus listed. Suitable for damp locations.
4-1/4" O.D.
Master Frame: 8" x 5-1/2"
Ordering Information
Example Order:
RL16
CTR1602-B-BLK
Housing
Trims
RL16
RL16
1-847-559-5500
www.con-techlighting.com
For Trims, see “Trims for 4" Line Voltage
Recessed Housings” spec sheet.
Please
Recycle
All specifications subject to change without notice.
Trims for 4"
Line Voltage MR16
Recessed Housings
Catalog No.
Type
Project
Maximum lamp rating for most trim options: 45W 120V MR16 lamp, GV8.0 base.
*On fixtures designed for use with standard MR16 lamps, Con-Tech provides a clear tempered safety lens.
If use of MR16 with front glass is required, remove the factory provided clear tempered safety lens.
All trims have white trim finish unless specified.
All trims are cULus listed.
All trims are suitable for damp locations.
3-1/2"
I.D.
3-1/2"
I.D.
1-5/16" x 2-1/4"
Oblong Slot
Baffled Downlight
Multiplier
Slotted Wall Wash
Standard Trim, 5-1/2” O.D.
CTR1601-B
Standard Trim, 5-1/2” O.D.
CTR1602-B-BLK
Standard Trim, 5-1/2” O.D.
CTR1603-P
Adjustable Black Baffle, Black Trim Ring
CTR1601-P
Black Multiplier, Black Trim Ring
CTR1602-P-(BLK, CLR, WHT, PL)
Choice of Multiplier Finish, White Trim Ring
Adjustable Black Baffle
CTR1602-(NK, ST)-CLR
CTR1601-P-WHT
Clear Multiplier, Choice of Metal Finish Trim Ring
Adjustable White Baffle
Narrow Trim, 4-15/16“ O.D.
CTR1602N-B-BLK
Narrow Trim, 4-15/16“ O.D.
CTR1601N-P
CTR1602N-P-(CLR, WHT)
CTR1601N-P-WHT
Cast Aluminum Trim, 5-1/8” O.D.
CTR1603-PA
Slot aperture permits maximum beam area
adjustment for either wall wash of concealed
accent lighting effects. 50° swing adjustment
and 358° rotation.
Black Multiplier, Black Trim Ring
Adjustable Black Baffle
Narrow Trim, 4-15/16“ O.D.
CTR1603N-P
Choice of Multiplier Finish, White Trim Ring
Adjustable White Baffle
Cast Aluminum Trim, 5-1/8” O.D.
CTR1601-PA
Adjustable Black Baffle
CTR1601-PA-WHT
Adjustable White Baffle
CTR1601-BA
Black Baffle, Black Cast Aluminum Trim Ring
Deep baffle traps stray light and conceals lamp.
May be used as a downlight or adjustable accent
light with 60° swing adjustment. May be used
with multiple light controlling elements (colored
lens, spread lens, louver, etc). Trims use a
stepped lens holder design: insert 45mm lens on
lower level of adjustable lamp seat, install 50mm
lens on the higher position.
Cast Aluminum Trim, 5-1/8” O.D.
CTR1602-PA-(CLR, WHT)
Utilizes a highly polished specular reflector to
maximize light inensity while concealing light
source. May be used as a downlight or
adjustable accent light with 35° swing
adjustment. May be used with multiple light
controlling elements (colored lens, spread lens,
louver, etc). Trim uses a stepped lens holder
design: insert 45mm lens on lower level of
adjustable lamp seat, install 50mm lens on the
higher position.
2-1/8"
I.D.
5-1/2"
O.D.
CTR1608-P
Adjustable Classic Eyeball, Black Baffle
45° Vertical adjustment, 358° horizontal rotation.
50mm Lens.
Reflector/Trim Finishes
Reflector Finish Options:
BLK - Black
CLR - Clear
1-847-559-5500
PL - Matte Platinum
WHT - White
Trim Finish Codes:
BA - Black Cast Aluminum
NK - Brushed Nickel
www.con-techlighting.com
Please
B
P
- Black
- White
Recycle
PA
ST
- White Cast Aluminum
- Brushed Stainless Steel
All specifications subject to change without notice.