RA316E20MH-R RA316E39MH-R Specifications/Features 3" Ceramic Metal Halide

advertisement
RA316E20MH-R
RA316E39MH-R
Catalog No.
3" Ceramic Metal Halide
Remodel Downlight with Electronic Ballast
Type
Project
Specifications/Features
Housing/Mounting
Architectural grade 3" housing, 3-1/2" aperture size.
3-7/8" Ceiling opening, allow minimum 3" clearance around fixture
from insulation material in insulated ceilings.
Fixture is easily installed through ceiling opening.
Retractable mounting clips lock fixture in place and adjust for different
ceiling thicknesses from 1/2" to 1" and allow easy installation into
existing ceiling.
Low silhouette design for remodeling applications in solid or
suspended ceilings.
Narrow fixture design for fast installation through ceiling opening
minimizes remodeling mess.
Lamp/Electrical
(1) 20W or 39W Ceramic Metal Halide MR16, GX10 base.
Aluminum heat sink prevents lamp overheating.
Electronic Ballast: 120V or 277V for 50/60Hz operation Extends
lamp life up to 20% longer than magnetic ballasts. Constant power
design adjusts to line and lamp voltage fluctuations, reducing lamp
color variations and providing good color rendition.
20W CMH: 24W Input. 0.20A@120V, 0.10A@277V
39W CMH: 44W Input. 0.39A@120V, 0.17A@277V
Sound rating A, Harmonic Distortion < 15%
End-of-life circuit and thermal protection for maximum safety.
Junction box has (3) 1/2" pryouts.
13-3/4"
6-1/4"
Trims
Many different trims options are available to complement any design
style. See “Trims for 3" CMH MR16 Recessed Housings” spec sheet
for trim selection and ordering information.
3-1/2" I.D.
4-1/8" O.D.
Warranty
This fixture is covered by ConTech’s full one (1) year replacement
guarantee after date of purchase.
Electronic ballasts have a five (5) year manufacturer’s warranty.
Listing
cULus listed. Suitable for damp locations.
Ordering Information
Example Order:
1-847-559-5500
RA316E20M H-R
CTR306M H-P
Housing
Voltage
Trims
RA316E20MH-R - 20W
RA316E39MH-R - 39W
120V - Standard
Leave blank
27 - 277V
For Trim Options, see “Trims for 3"
CMH MR16 Recessed Housings” spec
sheet for trim information and details.
www.contechlighting.com
Please
Recycle
All specifications subject to change without notice.
Trims for 3" MR16 CMH
Recessed Housings
Catalog No.
Type
Specifications/Features
Project
All trims have white trim finish unless specified.
All trims are compatable with 3 Inch Ceramic Metal Halide MR16 Recessed Housings: RA316E20MH and RA316E39MH.
Maximum lamp rating for most trim options: 39W Ceramic Metal Halide MR16 lamp, unless noted.
All trims are cULus listed and suitable for damp locations; only shower trims are listed for wet locations.
On recessed trims designed for use with MR16 lamps, ConTech Lighting provides a clear, tempered safety glass. This safety glass should
only be used with open MR16 lamps, and not used with MR16 lamps that contain an integral glass lens. If use of MR16 with front glass is
required, remove the factory provided clear tempered safety lens.
2-7/8"
I.D.
4-1/4"
O.D.
CTR301MH-P
Adjustable Multiplier with White Trim Ring; Select
Reflector Finish
CTR301MH-WHT
Adjustable White Baffle
15° Vertical swing, will accept (1) 45mm lens.
2-7/8"
I.D.
37° Vertical adjustment, will accept (1) 45mm lens.
4-1/4"
O.D.
Surface Adjustable Black Baffle
40° Vertical adjustment, 359° horizontal rotation.
Regressed black baffle reduces surface brightness.
Exclusive flat, stainless mounting clips hold trim
firmly to ceiling.
2-7/8"
I.D.
4-1/4"
O.D.
4-1/4"
O.D.
CTR302MH-P-(BLK, PL, WHT)
Adjustable Black Baffle
CTR306MH-P
2-7/8"
I.D.
CTR303NMH-P
1-3/8" x 2-1/2"
Oblong Slot
Slotted Wall Wash
50° Swing adjustment, external 358° rotation. Slot
aperture permits maximum beam area adjustment
for either wall wash or concealed accent lighting
effects. Black interior surface. Will accept (1)
45mm lens.
4-1/4"
O.D.
CTR307MH-(P, B)
4-1/4"
O.D.
CTR325MH-(P, B, NK, ST)
Adjustable Pin Spot, Black Baffle
CTR307MH-WHT
Adjustable Pin Spot, White Baffle
Deep baffle for maximum lamp concealment. May
be used as a pin spot style downlight or an
adjustable accent light. 35° Vertical adjustment.
Will accept (1) 45mm lens.
Fully Adjustable
Die cast, fully adjustable, round lampholder and
backplate. Easy relamping with twist-off front
retaining ring. Unsurpassed aiming flexibility: 87°
vertical, 359° rotational. Specify trim finish.
Reflector/Trim Finishes
Reflector Finish Options:
BLK - Black
PL - Matte Platinum
WHT - White
Trim Finish Options:
B NK P ST -
1-847-559-5500
www.contechlighting.com
Please
Recycle
Black
Brushed Nickel
White
Brushed Stainless Steel
All specifications subject to change without notice.
Download