RL16 Catalog No. 4" Line Voltage MR16 New Construction Housing Type Project Specifications/Features Housing/Mounting Compact 4" downlight housing for new construction applications. For dry wall, plaster or suspended ceilings. Housing height is internally adjustable with slotted screws. Aluminum reflector (lamp cover) provided. Lamp/Electrical (1) 45W 120V MR16 lamp, GU8.0 base (max). Lamp not supplied with fixture. Must be ordered separately. Junction Box has (4) 1/2" pry-outs with spring latch access plates. Thermally protected. Trims Many different trims options are available to complement any design style. See “Trims for 4" Line Voltage Recessed Housings” spec sheet for selection and ordering information. On trims designed for use with MR16 lamps, Con-Tech Lighting provides a clear, tempered safety glass. This safety glass should only be used with open MR16 lamps, and not used with MR16 lamps that contain an integral glass lens. 5-1/2" Warranty This fixture is covered by Con-Tech’s full one (1) year replacement guarantee after date of purchase. 5-1/4" Labels/Usage cULus listed. Suitable for damp locations. 4-1/4" O.D. Master Frame: 8" x 5-1/2" Ordering Information Example Order: RL16 CTR1602-B-BLK Housing Trims RL16 RL16 1-847-559-5500 www.con-techlighting.com For Trims, see “Trims for 4" Line Voltage Recessed Housings” spec sheet. Please Recycle All specifications subject to change without notice. Trims for 4" Line Voltage MR16 Recessed Housings Catalog No. Type Project Maximum lamp rating for most trim options: 45W 120V MR16 lamp, GV8.0 base. *On fixtures designed for use with standard MR16 lamps, Con-Tech provides a clear tempered safety lens. If use of MR16 with front glass is required, remove the factory provided clear tempered safety lens. All trims have white trim finish unless specified. All trims are cULus listed. All trims are suitable for damp locations. 3-1/2" I.D. 3-1/2" I.D. 1-5/16" x 2-1/4" Oblong Slot Baffled Downlight Multiplier Slotted Wall Wash Standard Trim, 5-1/2” O.D. CTR1601-B Standard Trim, 5-1/2” O.D. CTR1602-B-BLK Standard Trim, 5-1/2” O.D. CTR1603-P Adjustable Black Baffle, Black Trim Ring CTR1601-P Black Multiplier, Black Trim Ring CTR1602-P-(BLK, CLR, WHT, PL) Choice of Multiplier Finish, White Trim Ring Adjustable Black Baffle CTR1602-(NK, ST)-CLR CTR1601-P-WHT Clear Multiplier, Choice of Metal Finish Trim Ring Adjustable White Baffle Narrow Trim, 4-15/16“ O.D. CTR1602N-B-BLK Narrow Trim, 4-15/16“ O.D. CTR1601N-P CTR1602N-P-(CLR, WHT) CTR1601N-P-WHT Cast Aluminum Trim, 5-1/8” O.D. CTR1603-PA Slot aperture permits maximum beam area adjustment for either wall wash of concealed accent lighting effects. 50° swing adjustment and 358° rotation. Black Multiplier, Black Trim Ring Adjustable Black Baffle Narrow Trim, 4-15/16“ O.D. CTR1603N-P Choice of Multiplier Finish, White Trim Ring Adjustable White Baffle Cast Aluminum Trim, 5-1/8” O.D. CTR1601-PA Adjustable Black Baffle CTR1601-PA-WHT Adjustable White Baffle CTR1601-BA Black Baffle, Black Cast Aluminum Trim Ring Deep baffle traps stray light and conceals lamp. May be used as a downlight or adjustable accent light with 60° swing adjustment. May be used with multiple light controlling elements (colored lens, spread lens, louver, etc). Trims use a stepped lens holder design: insert 45mm lens on lower level of adjustable lamp seat, install 50mm lens on the higher position. Cast Aluminum Trim, 5-1/8” O.D. CTR1602-PA-(CLR, WHT) Utilizes a highly polished specular reflector to maximize light inensity while concealing light source. May be used as a downlight or adjustable accent light with 35° swing adjustment. May be used with multiple light controlling elements (colored lens, spread lens, louver, etc). Trim uses a stepped lens holder design: insert 45mm lens on lower level of adjustable lamp seat, install 50mm lens on the higher position. 2-1/8" I.D. 5-1/2" O.D. CTR1608-P Adjustable Classic Eyeball, Black Baffle 45° Vertical adjustment, 358° horizontal rotation. 50mm Lens. Reflector/Trim Finishes Reflector Finish Options: BLK - Black CLR - Clear 1-847-559-5500 PL - Matte Platinum WHT - White Trim Finish Codes: BA - Black Cast Aluminum NK - Brushed Nickel www.con-techlighting.com Please B P - Black - White Recycle PA ST - White Cast Aluminum - Brushed Stainless Steel All specifications subject to change without notice.