Quality Assurance #0452
2015-2016 Program Handbook
OntarioLearn
Conestoga College Institute of Technology and
Advanced Learning
Note: This is a companion document to the current
Conestoga Student Guide.
1
Contents
1.
WELCOME .............................................................................................................. 3
2.
PROGRAM HANDBOOK GUIDELINES .................................................................. 4
3.
PROGRAM STAFF CONTACT INFORMATION ...................................................... 4
3.1
4.
Program Faculty ................................................................................................. 4
PROGRAM OVERVIEW .......................................................................................... 4
4.1
Program Description .......................................................................................... 4
4.2
Program Design ................................................................................................. 5
4.2.1
5.
Program Learning Outcomes....................................................................... 5
PROGRAM INFORMATION AND REQUIREMENTS .............................................. 6
5.1
Program Enrolment ............................................................................................ 6
5.2
Academic Assistance ......................................................................................... 6
5.3
Academic Dates ................................................................................................. 6
5.4
Academic Probation ........................................................................................... 6
5.5
Academic Standing and Promotion .................................................................... 6
5.6
Attendance ......................................................................................................... 7
5.7
Awards ............................................................................................................... 7
5.8
Clearance of Academic Deficiency..................................................................... 7
5.9
Course Add/Drop ............................................................................................... 7
5.10
Credit Transfer/Exemptions ............................................................................ 7
5.11
Program-Specific Pathways ............................................................................ 7
5.12
Discontinuance ............................................................................................... 7
5.13
Equipment Supplies and Texts ....................................................................... 8
5.14
Evaluations (deadlines, tests, and examinations) ........................................... 8
5.15
Graduation ...................................................................................................... 8
5.16
Program Progression ...................................................................................... 8
5.17
Re-admission Requirements ........................................................................... 9
5.18
Student Feedback ........................................................................................... 9
6.
STUDENT SERVICES ............................................................................................. 9
7.
FACILITY INFORMATION ....................................................................................... 9
8.
SAFETY PROTOCOLS ............................................................................................ 9
9.
CONESTOGA POLICIES AND PROCEDURES ...................................................... 9
10.
PROGRAM REVISION LOG ............................................................................... 10
2
1. WELCOME
Welcome to Conestoga!
This program handbook has been designed to provide you with information specific to
Quality Assurance (part-time) #0452. It is a companion document to the Student
Guide.
We are proud of the programming we offer and the pathways that are available here at
Conestoga.
Like you, more and more students are electing to further their education through online
study, given the many benefits it provides. As a program offered through OntarioLearn,
the course material is accessible 24 hours a day, 7 days a week, and is ideal for those
who are unable to attend regularly scheduled classes. You can take courses from the
comfort of home or almost anywhere, accessing the program courses at your
convenience.
Our faculty members are chosen not only for their subject matter expertise, but also for
their passion for adult learning through the sharing of their knowledge and
experience. Whether it be in a face-to-face, mixed, hybrid or online environment, our
faculty have the teaching expertise to help you succeed in your educational goals.
I wish you the best in your studies and encourage you to contact us if you have any
questions about the program.
Sincerely,
Sandra Schelling
Dean, Educational Technology, Continuing Education and Corporate Training
3
2. PROGRAM HANDBOOK GUIDELINES
The purpose of this handbook is to provide students with program-specific details and
other important information. The material in this handbook is accurate at the date of
posting, and is applicable for the current academic year. Students will be informed of
handbook changes that occur, if any, through college email. Program handbooks are
updated yearly and students must check their program handbook for the current edition.
3. PROGRAM STAFF CONTACT INFORMATION
Dean, Continuing Education, Educational Technology & Corporate Training
Sandra Schelling
Doon Campus, Welcome Centre
(519) 748-5220 ext. 3221
sschelling@conestogac.on.ca
Program Administrator/OntarioLearn Coordinator:
Shirley Nequest
Doon Campus, Welcome Centre
(519) 748-5220 ext.: 3759
snequest@conestogac.on.ca
3.1 Program Faculty
Contact information for this faculty will be provided on the first day of related courses.
4. PROGRAM OVERVIEW
4.1 Program Description
This part-time program would be of interest to people employed in quality engineering
functions - quality control and quality assurance, receiving and in-process inspection,
and to co-ordinate measuring machine operators, manufacturing technicians and
technologists. Topics in quality control and assurance are covered in depth and in a
practical and realistic manner. On completion of the program, the graduate will be able
to apply the proper techniques and procedures to solve practical manufacturing
problems with respect to quality. Graduates will receive a College Certificate which is
recognized by industry.
This certificate will help in preparing to write the American Society of Quality's
certification examinations such as Certified Quality Technician (CQT), or Certified
Quality Engineer (CQE), once qualified work experience is obtained.
Note: ASQ Certification, examination fees and examination schedules are determined
by the ASQ and are not included in the course fees.
4
4.2 Program Design
Students can find their program design on the Student Portal by following the steps
below:
1. Log in to Student Portal
2. Click on ‘My Courses’ tab
3. Select ‘View Progress Report’ button
Courses are listed by level/semester.
Students can also view courses for the most current program design for this academic
year on the Conestoga College website Quality Assurance #0452. To find these
courses, scroll down the page to the ‘Program Courses’.
4.2.1 Program Learning Outcomes
1. Apply the related principles of applied sciences to problem solving in the quality
control and assurance fields.
2. Communicate technical information effectively to management, engineeringmanufacturing and sales-marketing groups, through the use of language,
graphics and computer skills.
3. Identify the major causes of defects and the critical problems of manufacturing
processes by applying the concepts of quality assurance and control, and
develop techniques and skills to provide solutions.
4. Apply knowledge, skills and practical procedures of quality control and assurance
to manufacturing processes and materials.
5. Participate with the manufacturing-engineering team to develop quality
manufacturing processes and products.
6. Apply the quality assurance and control related codes and standards with the
appropriate safety regulations and practices.
5
5. PROGRAM INFORMATION AND REQUIREMENTS
5.1 Program Enrolment
Did you know that in order to graduate from this program, you must first submit a
program application for acceptance?
Why should you complete a program application and be accepted in to this program?
•
•
You will receive course and program communication updates.
Credit for courses which are part of your program will be honoured despite
program requirement changes.
For more information please see the Program Application Form.
5.2 Academic Assistance
Academic assistance is available to students through a variety of avenues. The program
coordinator/academic advisor and faculty can advise students on specific program and
course information such as adding/dropping courses, etc. Access the Conestoga
website for assistance provided through Accessibility Services.
5.3 Academic Dates
Program start and end dates, holidays and deadlines for course add/drop and
withdrawal are located in the Student Guide. Course changes (add/dropping) may also
be made through the Student Portal under the “My Courses” tab.
Note: Not all programs follow listed dates. Contact your program coordinator or
administrator for more information.
5.4 Academic Probation
For more information visit the College Policies, Procedures and Guidelines webpage
then click on the Academic Administration side tab and search for the document entitled
Academic Standing and Promotion Requirements Procedure.
5.5 Academic Standing and Promotion
Students are required to successfully pass all courses by meeting the specified
minimum requirements in order to continue with the program.
•
•
Credit may be given for qualifying courses that were successfully completed up
to three (3) years prior to admission into the program.
Fundamentals of Quality Assurance is mandatory and it is recommended that
students complete this course first.
6
•
Students must pass 3 courses in Group A, 3 courses in Group B, and 2 courses
in Group C.
5.6 Attendance
The attendance policy varies from course to course. For more information please refer
to your course outline.
5.7 Awards
Visit the Financial Aid and Student Awards Office on Conestoga’s website for more
information.
5.8 Clearance of Academic Deficiency
During a student’s academic career, there may be occasions when the student’s
performance results in a failing grade for a course. Conestoga grants students the
opportunity to raise this grade to the minimum passing grade under specific
circumstances.
For more information visit the College Policies, Procedures and Guidelines webpage
then click on the Academic Administration side tab and search for the document entitled
Clearance of Academic Deficiency.
5.9 Course Add/Drop
For more information regarding course add/drop, please refer to the Continuing
Education Part-time Studies section of the Student Guide located in the Student Portal.
It is strongly recommended that students consult their program coordinator/program
administrator prior to dropping a course or for more information.
5.10 Credit Transfer/Exemptions
Please see the Student Guide for more details regarding credit transfer/exemptions.
5.11 Program-Specific Pathways
There are a number of different opportunities available to students who want to continue
studying at Conestoga. For more information regarding program-specific pathways visit
the Conestoga Pathways webpage.
5.12 Discontinuance
Students may be discontinued from a program if they do not meet specific academic
standards.
7
For more information visit the College Policies, Procedures and Guidelines webpage
then click on the Academic Administration side tab and search for the document entitled
Discontinuance Policy.
5.13 Equipment Supplies and Texts
For the most current listing of the required textbook(s) and/or supplies for each course,
please visit the Course Details page.
5.14 Evaluations (deadlines, tests, and examinations)
Copying and plagiarism of assignments will be dealt with in accordance with College
Policy regarding Academic Integrity.
Attendance for exams and tests is mandatory. If you miss an exam or test then a grade
of 0% will be assigned and a re-write will not be permitted. The only time a re-write will
be arranged is when you can provide a medical certificate stating due to illness or other
authorized reasons you were unable to write the exam or test on the scheduled day.
Faculty may choose to handle the makeup tests/exams directly or use the test centre
service.
For more information visit the Testing & Assessment Services webpage.
5.15 Graduation
Students are eligible to graduate upon completion of all academic requirements in their
program of study, including co-op placements if applicable. Students are expected to
respond to their invitation through their Student Portal. Convocation ceremonies are
held in the spring and fall of each academic year. Students, who take longer than the
advertised program length, are responsible for completing any new or additional
courses due to a program design change.
Students who have successfully completed their program design are required to fill out
an Application to Graduate form and submit it, with payment, to the Registrar’s Office.
Students who are discontinued or have withdrawn and then return to the college will be
placed in the current program design and must meet all requirements to graduate.
5.16 Program Progression
Students actively registered in cohort delivered programs who take longer than the
designed program length of time to complete their studies are accountable for
completing any new or additional courses resulting from changes in the program of
study. Unless otherwise stated, students registered in non-cohort delivered programs
must complete the program of study within four years of being admitted to the program.
8
5.17 Re-admission Requirements
Please see the Student Guide for more information regarding re-admission
requirements.
5.18 Student Feedback
Student feedback is an essential component of our continuous improvement process.
Student Appraisal of Teaching
The OntarioLearn Evaluation Survey allows direct feedback from students on teaching
for a particular course. Completion of the survey gives teachers and academic
managers valuable information.
Students complete an electronic copy and a summary of results is prepared by
OntarioLearn. The report is sent to the Academic Manager who shares the report with
the faculty member AFTER all marks for the semester have been collected.
6. STUDENT SERVICES
Refer to the Student Guide for information on Accessibility.
7. FACILITY INFORMATION
Refer to the Student Guide for information on after-hours parking, classroom and
computer labs.
8. SAFETY PROTOCOLS
Refer to the Student Guide for Conestoga’s Safety and Security Services and
procedures.
9. CONESTOGA POLICIES AND PROCEDURES
A Student Protection Acknowledge confirmation pop-up will appear once an
applicant/student logs into the Student Portal. A PDF directs students to policies and
procedures relevant to their academic responsibilities. Policies and procedures are
searchable on Conestoga’s website. Students are advised to review and comply with all
policies and procedures including the following:
• Academic Dispute and Resolution Policy/Procedure
• Academic Integrity Policy
• Academic Recognition Policy
• Academic Credential Procedure
• Clearance of Academic Deficiency Policy/Procedure
• Co-operative Education Policy
• Discontinuance Policy/Procedure
• Eligibility to Participate in Co-op Work Terms Policy/Procedure
9
•
•
•
•
•
•
•
•
•
10.
Evaluation of Student Learning Policy/Procedure
Grading Procedure
Graduation Requirements and Convocation Procedure
Honours Policy/Procedure
Program/Course (Cohort) Withdrawal Procedure
Student Concerns and Issues/Procedure
Student Fees Policy
Student Feedback Policy
Violation of Academic Integrity Procedure
PROGRAM REVISION LOG
Revision Date
01/08/2014
01/07/2015
Summary of changes
Original handbook creation.
Updated per CCQI.
10