A225
SCIENCE BUILDING
TECH SUPPORT
Help Desk: x4357
For priority support, please use the
classroom phone.
NOTES
At the end of class:
Turn off the projector.
Log off the teaching station.
Turn off the room lights.
PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION
Science Building
A225
THIS ROOM IS EQUIPPED WITH:
COMPUTER
VIDEO
AUDIO
PC
Video Projector
Wall Speakers
Laptop Connection
Document Camera
Wireless Presenter
DVD/VCR Player
Built-In Stereo
Receiver
AV SWITCH
TURNING POINT
Extron Switch
Clicker Receiver
Extron Receiver
DVD/VCR Combo
Surge Protector /
Power Conditioner
Extron Switch
1
A225
EQUIPMENT
OVERVIEW
Panasonic PT-F300
Projector
This room is equi pped with an Extron video switch that allows
users to quickly and easily switch between different sources.
The inputs on the switch are clearly indicated and will correspond to the device you wish to use.
To operate the projector:
1.)
Press the Display ON button on the Extron switch. (The
ON button will blink for 10-15 seconds while the system
warms up.)
2.)
Select the appropriate video device using the INPUT
buttons on the Extron switch.
3.)
Adjust the VOLUME knob on the Extron switch to reach
the desired level.
On/Off
Input Buttons
2
PROJECTOR
Volume Knob
Built-In
Stereo Receiver
Like video settings, the audio for all devices may be adjusted with the
volume controls on the Extron switch.
To adjust audio settings:
1.)
Adjust the VOLUME knob on the Extron switch to reach
the desired level.
Note: When the computer is used for audio, sound is also controlled via the Windows
System Volume. This may also need to be adjusted to reach the desired volume.
3
AUDIO SYSTEM
Volume Knob
Samsung SDP-860
Document Camera
1.)
Turn on the projector by pressing the DISPLAY ON button on the
Extron switch. (See page 2.)
2.)
Use the DOC CAM input button on the Extron switch to select the
document camera as the video source.
3.)
Turn the document camera on by pressing the POWER button. (See
illustration below.)
4.)
To view the document camera on the teaching station monitor, along
with the projector, press the SOURCE button marked on the monitor.
Zoom Control
Source
4
DOCUMENT CAMERA
To use the document camera:
Toshiba SD-V296
DVD/VCR Combo
To use the VCR/DVD Combo:
1.)
Turn on the projector by pressing the DISPLAY ON button on
the Extron switch. (See page 2.)
2.)
Use the DVD/VCR input button on the Extron Switch to
select the combo player as the audio/video source.
3.)
Turn on the combo player by pressing the POWER button and
insert your media to begin playing.
4.)
Use the VCR/DVD button on the combo player to
select between playing a VHS Tape or a DVD.
VGA
Laptop Connection
To connect a laptop computer:
1.)
Plug the VGA cable into the VGA port on your laptop and, if audio is
desired, plug the 1/8” stereo cable into your laptop’s headphone jack.
2.)
To display the computer’s screen on the video projector, turn the
projector on by pressing the Display ON button on the Extron
switch. Then press the LAPTOP input button on the Extron Switch
to select the laptop as the video source.
Connecting to the Internet:
This classroom is equi pped with an Ethernet cable allowing for wired internet
access. It is advisable to use a wired connection whenever possible.
Wireless internet connections are also available in most classrooms. For
instructions on configuring your laptop, contact Help Desk at x4375 or visit
www.uwsp.edu/IT/Network/Wireless.
5
DVD/VCR/LAPTOP
(If your laptop does not have a VGA port, contact Tech Support for further assistance. Also, some laptops
require proper configuration to utilize an external display. To configure your laptop accordingly, please refer to the
instructions provided by your manufacturer.)
HP
Computer
To use the computer:
1.)
LOGON to the computer using your UWSP username and password.
2.)
To display the computer’s screen on the projector, press the ON
button on the Extron Controller. After the ON button stops flashing,
press the PC button on the Extron Controller to select the computer as
the audio/video source.
Unlocking a computer:
If the PC’s screen indicates that it has been locked by another user, you can
unlock the system by restarting it. To restart a locked computer:
1.)
Press and hold the POWER button on the computer until it shuts
down (typically, you will need to hold the button for 5 to 10 seconds
before the sequence will begin).
2.)
Press the power button again to restart the PC. When the login screen
appears, enter your UWSP username and password.
NOTE TO USERS:
6
COMPUTER
Please remember to logoff the computer when finished. After 60 minutes of
inactivity, classroom computers will automatically lock, preventing subsequent
users from logging on. If a computer has accidentally been left locked by another
user, please see the section on “Unlocking a Computer” above.
SCIENCE
BUILDING
A225
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the
technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
During the hours of 7 AM - 3:30 PM, issues related to building
maintenance may be directed to Facility Services. During off-hours,
maintenance emergencies may be reported to Protective Services.
SECURITY CONCERNS
For issues related to building or campus security, please contact
Campus Protective Services.
POLICE/FIRE EMERGENCIES
x4219
FACILITY SERVICES
x3456
CAMPUS PROTECTIVE
SERVICES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT
SECOND
FLOOR
EXIT
EXIT
EXIT
EXIT
EXIT