A212
SCIENCE BUILDING
TECH SUPPORT
Help Desk: x4357
For priority support, please use the
classroom phone.
NOTES
At the end of class:
Turn off the projector.
Log off the teaching station.
Turn off the room lights.
PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION
Science Building
THIS ROOM IS EQUIPPED WITH:
COMPUTER
VIDEO
AUDIO
PC
Video Projector
Wall Speakers
SMART Board
Document Camera
Projector Controlled
Audio System
Wireless Presenter
DVD/VCR Player
AV SWITCH
Auto Switch
VCR/DVD Combo
1
A212
A212
EQUIPMENT
OVERVIEW
Panasonic PT-F300
Projector
To use the projector:
1.
Make sure both the projector and the needed video
device (Computer, VCR, DVD, etc.) are turned ON.
2.
Use the corresponding INPUT button on the
projector’s remote to activate the audio/video input line
for the device.
Computers, laptops, and document cameras are activated by using the
COMPUTER button on the projector remote. VCR and DVD players are
activated by pressing the VIDEO button on the projector remote.
This room may be equi pped with a VGA Switch that requires additional input
selection to display the device through the projector. A detailed explanation of
how to operate each device is given in the following sections of the manual.
Input Buttons
INPUT CONFIGURATION:
Projector Remote
2
PROJECTOR
Computer 1 - Auto Switch
Computer 2 - Document Cam
Video - VCR/DVD
Projector Controlled
Audio System
All audio in the Projector Controlled Audio System is adjusted directly
through the volume button on the projector’s remote. Additionally, the
remote‘s AV Mute button can be used to silence the audio and
simultaneously black the screen.
AV Mute Button
Windows System
Volume
Volume Button
Note: When the computer is used for audio, sound is also controlled via the Windows
System Volume. This may also need to be adjusted to reach the desired volume.
3
AUDIO SYSTEM
Projector Remote
Samsung SDP-860
Document Camera
1.)
Turn on the projector by pressing the POWER button on the projector
remote. (See page 2.)
2.)
Use the COMPUTER input button on the projector remote and choose
COMPUTER 2 to select the document camera as the video source.
3.)
Turn the document camera on by pressing the POWER button. (See
illustration below.)
4.)
To view the document camera on the teaching station monitor, along
with the projector, press the SOURCE button marked on the monitor.
Zoom Control
Source
4
DO CUMENT CAMERA
To use the document camera:
Panasonic PVD4744S
VCR/DVD Combo
1.)
Turn on the projector by pressing the POWER button on the
Projector Remote. (See page 2.)
2.)
Use the VIDEO input button on the Projector Remote to
select the combo player as the audio/video source.
3.)
Turn on the combo unit by pressing the POWER button and
insert your media to begin playing.
4.)
Use the VCR/DVD button on the Combo unit to select
between playing a VHS Tape or a DVD.
5
VCR/DVD
To use the VCR/DVD Combo:
SCIENCE
BUILDING
A212
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the
technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
During the hours of 7 AM - 3:30 PM, issues related to building
maintenance may be directed to Facility Services. During off-hours,
maintenance emergencies may be reported to Protective Services.
SECURITY CONCERNS
x4219
FACILITY SERVICES
x3456
For issues related to building or campus security, please contact
Campus Protective Services.
CAMPUS PROTECTIVE
SERVICES
POLICE/FIRE EMERGENCIES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT
SECOND
FLOOR
EXIT
EXIT
EXIT
EXIT
EXIT
HP
Computer
To use the computer:
1.)
LOGON to the computer using your UWSP username and password.
2.)
To display the computer’s screen on the projector, turn the
projector on using the POWER button on the remote. Then press the
corresponding input button on the projector remote to choose the Auto
Switch as the video source (see the “PROJECTOR” page). The computer
will display on the projector as long as no other devices are active.
Unlocking a computer:
1.)
Press and hold the POWER button on the computer until it shuts
down (typically, you will need to hold the button for 5 to 10 seconds
before the sequence will begin).
2.)
Press the power button again to restart the PC. When the login screen
appears, enter your UWSP username and password.
NOTE: Please remember to logoff the computer when finished.
After 60 minutes of inactivity, classroom computers will automatically lock, preventing
SMART Board
This room is equi pped with a SMART Board, which is touch sensitive screen. You can
use the SMART Board to interact with a computer in much the same way you would
a mouse or keyboard. If you use SMART's Notebook collaborative software with the
SMART Board, you can create highly interactive presentations. Detailed instructions
on how to use a SMART Board and SMART's Notebook software can be found at:
http://smarttech.com/us/Resources/Training
Troubleshooting Ti ps:
SMART Boards require frequent recalibration. If the SMART Board does not respond
correctly to your touch, you can recalibrate it by holding down the two buttons in the
center of the SMART Board tray until a dialogue appears on the screen. Once the
dialogue button appears, follow the on-screen instructions.
6
COMPUTER/SMART BOARD
If the PC’s screen indicates that it has been locked by another user, you can
unlock the system by restarting it. To restart a locked computer:
VGA
Laptop Connection
To connect a laptop computer:
1.)
Plug the VGA cable into the VGA port on your laptop and, if available,
plug the 1/8” stereo cable into your laptop’s headphone jack.
If your laptop does not have a VGA port, contact Tech Support for further assistance. Also, some laptops
require proper configuration to utilize an external display. To configure your laptop accordingly, please refer to the
instructions provided by your manufacturer.
2.)
Use the COMPUTER input buttons on the projector’s remote to
select the VGA Switch as the audio/video source.
This room contains an automatic video switch designed to detect a connected laptop. Selecting the COMPUTER 1
input, therefore should activate the switch and cause the video to be routed accordingly.
Connecting to the Internet:
Many classrooms are equi pped with an Ethernet cable allowing for wired internet
access. It is advisable to use a wired connection whenever possible.
Wireless internet connections are also available in most classrooms.
For
instructions on configuring your laptop, contact Help Desk at x4375 or visit
www.uwsp.edu/IT/Network/Wireless.
7
LA PTO P
VGA Cable