101
COLLINS CLASSROOM CENTER
TECH SUPPORT
Help Desk: x4357
For priority support, please use the
classroom phone.
NOTES
At the end of class:
Shut down TouchLink system.
Log off the teaching station.
Turn off the room lights.
PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION
Collins Classroom Center
THIS ROOM IS EQUIPPED WITH:
COMPUTER
VIDEO
AUDIO
PC
Video Projector
Audio Amplifier
Laptop Connection
Document Camera
Wall Speakers
Wireless Presenter
VCR
Lapel Microphone
Handheld Microphone
AV SWITCH
TouchLink System
TouchLink Display
Mics
Phone
VCR
Batteries
1
101
101
EQUIPMENT
OVERVIEW
Panasonic PT-D6000ULS
Projector
2
PROJECTOR
This room is equi pped with a TouchLink system that allows
users to quickly and easily switch between different sources.
Follow the on-screen instructions to control the audio or
video device of your choosing.
TouchLink
Volume Menu
Program and microphone volume are adjusted directly within the
TouchLink system. To adjust the program audio volume, use the
volume knob located on the TouchLink display. To adjust microphone
volume, or to unmute micrphones, select the “Mic Control” button on
the TouchLink display.
Please note that the microphones are muted by default and must be
unmuted before use.
Mic Control Button
Volume Knob
If playing sound through the PC, volume can
also be adjusted within Windows’ system
volume settings. If no audio is delivered to
the speakers, or if insufficient volume occurs
during playback, be sure to check these
settings before proceeding.
Windows System
Volume
3
AUDIO SYSTEM
TouchLink Display
Samsung SDP-860
Document Camera
1.)
Make sure the document camera is turned ON.
2.)
Select DOC CAM from the TouchLink display (See page 2.)
4
DOCUMENT CAMERA
To use the document camera:
Panasonic AG1330
VCR
1.)
Select VCR from the TouchLink display. (See page 2.)
Windows Media
DVD Player
While this room is not equi pped with a dedicated DVD player, DVDs can be played
through the PC’s DVD drive.
1.)
Select PC from the TouchLink Display. (See page 2.)
2.)
Insert your DVD into the PC’s DVD drive.
3.)
If video playback software does not automatically open, launch Windows
Media Player from the application menu.
5
DVD/VCR
To play a DVD:
HP
Computer
To use the computer:
1.)
LOGON to the computer using your UWSP username and password.
2.)
Select PC from the TouchLink display (see the “PROJECTOR” page).
Unlocking a computer:
If the PC’s screen indicates that it has been locked by another user, you can unlock the system
by restarting it. To restart a locked computer:
1.)
Press and hold the POWER button on the computer until it shuts
down (typically, you will need to hold the button for 5 to 10 seconds
before the sequence will begin).
2.)
Press the power button again to restart the PC. When the login screen appears, enter
your UWSP username and password.
NOTE TO USERS:
Please remember to logoff the computer when finished. After 60 minutes of inactivity, classroom
computers will automatically lock, preventing subsequent users from logging on. If a computer has
accidentally been left locked by another user, please see the section on “Unlocking a Computer” above.
VGA
Laptop Connection
To connect a laptop computer:
Plug the VGA cable into the VGA port on your laptop and, if available, plug the 1/8” stereo
cable into your laptop’s headphone jack.
If your laptop does not have a VGA port, contact Tech Support for further assistance. Also, some laptops
require proper configuration to utilize an external display. To configure your laptop accordingly, please refer to the
instructions provided by your manufacturer.
2.)
Select Laptop from the TouchLink display.
(See page 2.)
Connecting to the Internet:
Many classrooms are equi pped with an Ethernet cable allowing for wired internet
access. It is advisable to use a wired connection whenever possible. Wireless
internet connections are also available in most classrooms. For instructions on
configuring your laptop, contact Help Desk at x4375 or visit www.uwsp.edu/IT/Network/Wireless.
VGA Cable
6
COMPUTER & LAPTOP
1.)
Handheld and Lapel
Microphones
To use the lapel mic:
1.)
Turn the mic’s body pack on by pressing and holding the Power/Mute
button for approximately 1 second. When on,the power indicator light
will turn green.
2.)
From the TouchLink display, select the Mic Control button and unmute
the lapel mic.
3)
When finished, power off the body pack by pressing and holding the
Power/Mute button for approximately 3 seconds. When off,the power
indicator light will turn off.
Power/Mute Button
Power Indicator Light
To use the handheld mic:
1.)
Turn the mic’s power On.
2.)
From the TouchLink display, select the Mic Control button and unmute the handheld
mic.
3)
When finished, switch the mic Off.
On Switch
Handheld Mic
7
M I CR O PHONE S
Lapel Mic Body Pack
COLLINS
CLASSROOM
CENTER
101
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the
technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
During the hours of 7 AM - 3:30 PM, issues related to building
maintenance may be directed to Facility Services. During off-hours,
maintenance emergencies may be reported to Protective Services.
SECURITY CONCERNS
For issues related to building or campus security, please contact
Campus Protective Services.
POLICE/FIRE EMERGENCIES
x4219
FACILITY SERVICES
x3456
CAMPUS PROTECTIVE
SERVICES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
FIRST FLOOR
EXIT